Ernest N. Delgado

**** **** **** *****

San Antonio, Texas

(Home) 210-***-****

(Cell) 512-***-****

OBJECTIVE: To obtain a challenging and responsible position with a reputable company that will utilize my education, abilities and knowledge.

QUALIFICATIONS 1983-2009

MATERIALS TESTING TECHNICIAN/CIVIL ENGINEERING INSPECTOR

ACNM / NMSH&TD, TTCP, ASTM, ACI and Texas Highway Department inspection and Testing procedures for concrete, soils and general construction including inspection and data. Proficiencies include both laboratory and field technique and report writing.

WORK HISTORY

2008-present (U.S. Army Core of Engineers) San Antonio, Texas

Construction Representative

As a Construction Representative for the Army Core of Engineers, I maintain surveillance, on a day-to-day basis, over the full range of field engineering activities associated with specific phases of the construction project. I made sure that the Contractor complies with the wage and hour laws, equal employment opportunity of other labor laws and regulations. Prepared daily QA Reports of activities, weather conditions, progress of construction, reasons for delay, QC testing and any unusual problems encountered. Reviewed specifications for clearing of land, excavation, materials testing requirements, storage or stockpiling of materials, use of and location of borrow and spoil areas, and surveying requirements as to setting stakes to mark pertinent features. Compiles at-the-site data and makes recommendations for contract modifications to solve problems requiring design changes, changes in materials or construction methods and extensions of time. Discusses the problem with supervisor and presents details of the situation. Reviews proposed modifications from the viewpoint of costs and quantities of materials. Reviewed the Contractors' payment estimate submittals, progress measurement data, and reports of materials and equipment used, against information shown on field inspection and survey reports, and recommends approval or disapproval. Insure adherence to safety regulations in day-to-day construction activities. Attended safety meetings conducted by Contractor's Representatives and acts as adviser on all safety matters. Reviewed "as-built drawings" to insure changes in plans and specifications have been accurately noted. Reviewed plans and specifications for proposed projects to determine practicability from a construction viewpoint and whether physical obstructions or other construction difficulties have been anticipated. Performs BCE reviews and provide a report of findings and/or enter findings in computer automated data systems

2007-2008 Foster CM Group

San Antonio, Texas

Field Inspector (City of San Antonio Projects)

As a Field Inspector, I conducted inspection of construction materials, grade elevation, concrete structures and construction safety precautions. I photographed and documented the condition of existing property that might be damaged by the work and ensured all existing structures, properties, utilities and landscaping were properly protected. Reviewed the Contractors payment estimate submittals, progress measurement data and reports of materials and equipment used, against information shown on field inspection and survey reports, and recommended approvals or disapprovals. Prepared Daily QA Reports of activities, weather conditions, progress of construction, reasons for delay, QC testing and any unusual problems encountered. Review specifications for clearing of land, excavation, materials testing requirements, storage or stockpiling of materials.

2007 Fluor

Salem, Oregon

Senior Construction Inspector

(Oregon Bridge Developing Partners) I-5 Project

As a Senior Construction Inspector I directed and trained subordinates. Review and interprets plans, specifications and sites for construction projects. I assures contractors' conformance to plans, specifications and applicable safety regulations. I assumed responsibility for the quality control of concrete, soil, mechanical and electrical equipment or other materials used on construction projects. I arranged and conducted preconstruction meetings, and makes suggestions or criticisms that serve to establish the procedural guidelines for the project. I coordinated the various project functions with the owner, the general contractor, the architects, engineers, and other project consultants or agencies. I estimated quantities of work completed and prepares the progress payment forms. I supervised or performed the preparation of records, reports, as-built plans and other field office engineering work. I checked quality of materials and construction methods by personal inspection or by the use of supporting staff. I coordinated materials testing, construction surveying and electrical inspections. I maintained a complete set of project records, reports and correspondence for each assigned project. I scheduled final inspections and recommends acceptance of projects. I inspected to assure adherence by contractors to safety rules.

2004-2007

Bridge Inspector AeroTek

AUSTIN, TEXAS

State Highway/Toll Road 130 Project

As a Bridge Inspector, I inspected bridge structures to determine if hazards to the health, safety and welfare of the public were present. Maintain current bridge inventory data for use by local, state and federal officials to allocate resources for bridge. I inspected bolts on a Skidmore for elongation and the rotational capacity to make sure bolts have their proper torque, lubrication and there was no rust on the bolts. We used a chart to determine the elongation, and the damage to threads on bolts. The method used was turn of the nut which depended on the length of bolts. Scheduled and performed inspections to bring all bridges into compliance with state and federal mandates for bridge inspections. I monitored the duties of equipment operators and traffic control personnel to safely, efficiently and thoroughly conduct the inspection procedures.

2003-2004 Palmetto Bridge Construction

CHARLESTON, SOUTH CAROLINA

QC Inspector

Cooper River Bridge Project

As a QC Inspector, I monitored and inspected concrete for piers, columns, caps for specification conformance including reinforcing steel inspections, and post-tensioning of steel tendons and the sampling of concrete ready mix placement. I inspected bolts on a skid Moore for elongation and the rotational capacity to make sure bolts have their proper torque, and lubrication, and there was no rust on the bolts. We used a chart to determine elongation and damage to threads on bolts. The method used was turn of the nut which depended on the length of bolts. My duties also included the breaking of cylinders the marking, and storage of cylinders.

2002-2003 BALFOUR BEATTY

BEAUFORT, SOUTHCAROLINA

QA/QC Inspector

SC 170 Bridge Project

As QA/QC inspector I monitored and inspected concrete and soils for moisture by running a one point on soils with the use of a speedy moisture and matching the curve on the family of curves, I also did reinforcing steel inspections on columns, and caps for the Chechesse River Bridge and for the Broad River Bridge. I inspected the concrete for the water to cement ratios in the field prior to contractor adding water. Duties also included geotechnical laboratory work and environmental engineering, we worked off of barges under the bridge to make sure that no concrete fell into the water or petroleum products contaminated the water. I inspected the job for the silt fence placement, and maintained of silt fence for erosion protection.

2001-2002 VINYARD AND ASSOC.

ALBUQUERQUE, New Mexico

MATERIALS TESTING TECHNICIAN

As a technician I monitored and inspected concrete and asphalt for specifications and conformance; including reinforcing steel, geotechnical sampling, inspection, testing of concrete ready mix placement. Duties also included sampling and inspection of various private and commercial construction projects.

2000-2001 Flatiron Structures

Cuba, New Mexico

Field Inspector

Highway 44 Project

As a field inspector I monitored and inspected concrete and soils for specification and conformance including reinforcing steel, geotechnical sampling, inspection and testing of concrete Ready mix placement and sampling. I have knowledge of the operation and safety requirements of the Nuclear Density gauge. Duties also included geotechnical laboratory work. I have the ability to: make accurate engineering calculations and drafting geometric diagrams; inspect construction work for compliance with contract documents; analyze situations accurately and adopt an effective course of action; prepared comprehensive technical reports.

1999-2000 Geotechnical Consultants

San Antonio, Texas

Materials Testing Technician

As a technician, I have knowledge of: the operation and safety requirements of nuclear density gauges, the physical properties and characteristics of materials, methods, tools and equipment. Approved methods and equipment used in the physical testing of such materials. I have the great ability to inspect construction work for compliance with contract documents; analyze situations accurately and adopt an effective course of action. I tested various private and commercial construction projects.

1998-1999 HBC-Engineering

Austin, Texas

Materials Testing Technician

As a Testing Technician I utilized a 40 lbs gauge to run test on construction materials.

Obtain concrete samples from various private and commercial construction projects. I made concrete test cylinders and delivered them back to the lab. Ran tests on concrete samples using ASTM methods. Observe construction crews performing related construction activities. I recorded the construction crew performance daily and I interacted with clients and contractors.

1994-1998 Texas Tool Makers Inc.

San Antonio, Texas

Environmental &General Maintenance Technician

As a shop technician I performed general shop maintenance on tool equipment and inspected equipment for wear tolerances and faults including conformance to technical specification.

1993-1994 Morrison Knudsen Corporation

San Antonio, Texas

Quality Control Engineer

I was assigned to the United States Department of Energy Uranium Mill Tailings Remedial Action (UMTRA) Project for the cleanup of Uranium mill tailings. Duties include inspections, hazardous waste monitoring, reporting generation and calibration of field and laboratory equipment.

1984-1986 Prescon Corporation

San Antonio, Texas

Concrete Technician

As a concrete technician, I monitored and inspected concrete for specification and conformance including reinforcing steel, pre-tension and post-tensioning of steel tendons and concrete ready mix placement and sampling.

1983-1984 Fru-Con Construction

San Antonio, Texas

Concrete Testing Technician

As a concrete technician, I monitored and inspected concrete for specification and conformance including reinforcing steel and concrete ready mix placement and sampling.

Education

1985 GED Arkansas

Accreditations:

Construction Quality Management for Contractors (Certified)

TTCP Soils

TTCP Concrete

TTCP Aggregate

Level I NQA-1 Civil/Soil

Level I NQA-1 Concrete

40-hr Hazmat (expired)

Radiation Worker Certification Level II (expired)

Troxler Nuclear Gauge Certificate

Soil Technician Certificate (NM)

Aggregate Technician Certificate (NM)

ACI Certificate-International

S.C. Asphalt Roadway Technician

S.C. Earthwork, Drainage & Base Inspector

Profile: Organized, confident, adaptable, perceptive, well disciplined, structured, dedicated, knowledgeable, motivated, attentive, and communicative.

Language: English, Spanish, and Sign Language.

References Available Upon Request

Contact this candidate