CHARLES S. DYBALA

*** ****** ******., ***. ****, Houston, Texas 77060, 1-586-***-****

Objective

Employment where my skills, experience and accomplishments can assist employer in achieving their goals and objectives.

Employment

JOURNEYMAN ELECTRICIAN

February 2010-May 2010

Daniel Group/Vam Drilling

Houston,Texas

Electrical and mechanical maintenance, preventative maintenance, programming, installation and repairs of PLC controlled production pipe welding equipment, induction heating equipment and building and facility systems.

JOURNEYMAN ELECTRICIAN

September 2009-February 2010

Aerotek/Trelleborg Engineering

Houston,Texas

Electrical and mechanical maintenance, preventative maintenance, programming and repairs of PLC controlled production equipment and building and facility systems. Including overhead cranes, research and test facility.

SERVICE TECHNICIAN

March2008-September 2009

Gaffey Crane/All Crane

New Iberia, Louisiana

Certified crane inspector responsible for electrical/electronic, mechanical, maintenance, preventative maintenance, installation and repair of overhead and jib cranes manufactured by Gaffey, Coffing, Louisiana, Kranco, P and H, Budget, Yale, Demag and Detroit. Install and troubleshoot radio remote controls

MAINTENANCE TECHNICIAN

August2007-December2007

Diversified Machine Products

Detroit, Michigan

Responsible for electrical/electronic, mechanical, pneumatic and hydraulic maintenance, preventative maintenance, programming and repair of CNC machining centers with Fanuc controls and ABB and Fanuc robot systems. Responsible for electrical/electronic, mechanical, pneumatic and hydraulic maintenance, preventative maintenance, programming and repair of Leak test machinery with Allen Bradley PLC controllers.

MAINTENANCE LEADER

June 2002-August 2007

AZ Automotive

Roseville, Michigan

Responsible for electrical/electronic, mechanical, pneumatic and hydraulic maintenance, preventative maintenance, programming and repair of Verson transfer presses and Niagara presses with progressive dies. Including Indramat and Atlas feeders with Allen Bradley SLC 500 PLC. Responsible for electrical/electronic, mechanical, pneumatic and hydraulic maintenance, preventative maintenance, programming and repair of resistance welding fixtures with Allen Bradley SLC 500 PLC and Allen Bradley Micrologix 1000 PLC with Robotron and Medar weld controllers and Nachi, Fanuc, and Daihen(OTC) robots performing mig and resistance welding.

JOURNEYMAN ELECTRICIAN

May 2001- June 2002

Veltri Metal Products

New Baltimore, Michigan

Responsible for electrical/electronic, mechanical, pneumatic and hydraulic maintenance, preventative maintenance, programming and repair of robotic mig welding fixtures including Fanuc, Motoman and Daihen(OTC) with Allen Bradley SLC 500 PLC. Responsible for electrical/electronic repair of resistance welding fixtures with Robotron weld controllers and Allen Bradley SLC 500 PLC with Motoman robotics.

JOURNEYMAN ELECTRICIAN

August2000- May 2001

BAE Industries

Centerline,Michigan

Responsible for maintenance, preventative maintenance, programming and repair of presses with progressive dies. Including Dallas feeders and straighteners with Allen Bradley SLC 500 PLC. Responsible for electrical/electronic repair of resistance welding fixtures with Robotron weld controllers and Allen Bradley SLC 500 PLC with Motoman robotic

MAINTENANCE SUPERVISOR

March1999-August 2000

Hawthorne Metal Products

Royal Oak,Michigan

Responsible for monitoring production equipment and planning maintenance

and preventative maintenance for automated welding and presses, press equipment and Fanuc robots. Responsible for QS9000 maintenance program using Micromain maintenance software.Training includes ISO-14001 program, Fanuc robots electrical maintenance and programming with R3 controller. Member of safety team and up grader training committee.

JOURNEYMAN ELECTRICIAN

September1998- March1999

Hawthorne Metal Products

Royal Oak, Michigan

Responsible for electrical maintenance, preventative maintenance, programming and electrical repair of presses and building. Included were Danly, Verson, Cleveland and Clearing presses with relay logic controls and Allen Bradley PLC controllers.

JOURNEYMAN ELECTRICIAN

June1998-September 1998

Johns Mansville

Waterville,Ohio

Responsible for electrical maintenance, preventative maintenance, programming

and electrical repair of machinery for manufacture of fiberglass materials including insulation and matting. This machinery included Allen Bradley PLC-5 controllers and induction heating equipment.

JOURNEYMAN ELECTRICIAN

September1997-June1998

Kenworth Truck Co.

Renton,Washington

Installed, troubleshoot, repair and preventative maintenance of all electrical equipment in the assembly and paint departments as well as general building maintenance.

JOURNEYMAN ELECTRICIAN

December1996-September 1997

Contractors and Builders PERSONNEL

Las Vegas, Nevada

Responsible for the installation of electrical and electronic systems in a commercial environment including power, control, lighting, alarm and computerized register systems(CAT5).

MAINTENANCE TECHNICIAN

May1996-December1996

D.N.S. Industries

Miami, Florida

Responsible for maintenance, preventative maintenance, troubleshooting, repair and installation of all equipment in the aluminum die casting, foundry, and assembly departments including all electrical, hydraulic, pneumatic, and mechanical systems. Also responsible for repairing, troubleshooting and programming of Allen Bradley PLC-5 and all electronic heat controls.

JOURNEYMAN ELECTRICIAN

December1995-May1996

Trumark Metal Products

Warren,Michigan

Electrical and electronic maintenance of press lines and resistance welding equipment

JOURNEYMAN ELECTRICIAN

April1995-December1995

Dukes Inc.

Toledo, Ohio

Electrical wiring of E-coat and paint coating machinery including Allen Bradley PLC-2 & 5 programmable logic controllers.

JOURNEYMAN ELECTRICIAN

December1994-April1995

Epco Machine Inc.

Fremont, Ohio

Refurbish plastic injection machinery including rewiring of Cincinnati Millacron, Farrel and Impco plastic injection machinery with Barber Coleman programmable controllers.

JOURNEYMAN ELECTRICIAN

February1994-December1994

Ford Motor Co.

Maumee,Ohio

Responsible to install, program, maintain, troubleshoot and repair of electrical and electronic equipment in the welding, plastics, stamping and research departments. Including Verson and Danly up to 2000 ton with Olofstrom programmable transfer units and Volvo and Bilsing robot systems with Cincinnati Millacron and Allen Bradley PLC-2 controllers.

JOURNEYMAN ELECTRICIAN

August1993-January1994

L.M. Container Mold

Perrysburg, Ohio

Responsible to maintain, troubleshoot and repair numerical controlled equipment in the mold shop. General building maintenance including boiler maintenance and office heating and air conditioning system.

JOURNEYMAN ELECTRICIAN

June1992-May1993

Cleveland Container Inc.

Cleveland, Ohio

Responsible for maintenance, repair, installation and programming of Cincinnati Millacron plastic injection machinery.

JOURNEYMAN ELECTRICIAN

September1987- June1992

Ford Motor Co.

Avon Lake, Ohio

Electrical team leader responsible to install, program, maintain, troubleshoot and repair of electrical and electronic equipment and troubleshoot hydraulic and pneumatic equipment in the Nissan Co(Quest) and Mercury(Villager) body shop. Included were Robotron, Medar and Weldtronic programmable weld controllers. General building maintenance and develop preventative maintenance programs.

JOURNEYMAN ELECTRICIAN

June1985-September1987

Ford Motor Co.

Avon Lake, Ohio

Responsible for preventative maintenance, installation, troubleshooting and repair of electrical and electronic equipment in the body shop in the Econoline Assembly Dept.. Included were Robotron, Medar and Weldtronic programmable weld controllers with Asea robots. Also for maintaining and repairing of electrical and electronic paint department equipment and associated conveyor, dry off ovens, paint booth electrostatic paint systems and general building maintenance.

JOURNEYMAN ELECTRICIAN

May1983- June1985

Ford Motor Co.

Allen Park, Michigan

Responsible for maintenance, troubleshooting, repair and installation of Robotron and Weldtronic programmable weld controllers in body shop and paint departments as well as installation and troubleshooting of broadband computer systems and general maintenance of assembly building and Emissions lab including high pressure boiler and air conditioning system

JOURNEYMAN ELECTRICIAN

August1982-May1983

Ford Motor Co.

Avon Lake, Ohio

Responsible for maintenance and troubleshooting of automated machinery in paint department including the “E” coat paint process, associated conveyor systems, dry off ovens and paint booths with electrostatic paint system. Installed, programmed and provided troubleshooting and repair of Allen Bradley programmable control systems and welder repair in production departments.

JOURNEYMAN ELECTRICIAN

June1977-August1982

Ford Motor Co.

Woodhaven, Michigan

Responsible for maintenance, troubleshooting, repair, installation and preventative maintenance of all production equipment including, V.S.I.,Danly and Verson presses with electronic clutches. Assigned to inspect, repair and adjust various test instruments and automated welding equipment with Square D digital circuitry.

JOURNEYMAN ELECTRICIAN

June1972-June1977

Doehler Jarvis Castings

Toledo, Ohio

Responsible for troubleshooting , wiring and designing circuits for all aluminum and zinc cleaning department machining fixtures. Maintaining existing electrical components and rewired refurbished Bliss power presses, Drake hydraulic presses and Minster presses with air clutches. Maintained electrical support equipment in zinc and aluminum casting departments. Assigned to make repairs and adjustments to Honeywell and Foxboro heat controls in foundry.

Education

INDUSTRIAL ELECTRICITY/ELECTRONICS

Macomber Vocational High School

1968-1971

Toledo,Ohio

INDUSTRIAL ELECTRICITY

Carl T. Cotter School of Apprenticeship Training Toledo,Ohio

1972-1976

State of Ohio Completion of Apprenticeship

Journeyman Maintenance Electrician

Associates Electronics Engineering

Cleveland Institute of Electronics

Will complete Associates degree 2011

Contact this candidate