Rey Jumaquio
Malacky, Bratislava
adrxg6@r.postjobfree.com
To conceptualize my Professional expertise in the field of Mechanical/Welding Engineering applicable to the Company's Project where I'm employed as a practitioner. Apply my ability with the application of what I learned with the guiding principles to promote the welfare of my employer. Willing to relocate: Anywhere
Sponsorship required to work in the US
Work Experience
Welding Engineer
ROBI, spol.,sr.o - Nitra, Slovakia
December 2020 to July 2021
Develops welding techniques,procedures and application of welding equipment to problems involving application of welding equipment to problems involving fabrication of metals,utilizing knowledge of production,specification,properties and characteristics of metals and metal alloys and engineering principles.Conducts research and development investigations to develop and test new fabrication processes and procedures,improve existing and develop new or modify current welding methods,techniques and procedures,discover new patterns of welding phenomena,or to correlate and substantiate hypothesis.
Welding Engineer
JM MCGREGOR HAGGENS INC - Manila
August 2018 to November 2020
Mla. Phils 1101
Designation: Welding Engineer
Job Description:
• Develops welding techniques, procedures, and application of welding equipment to problems involving fabrication of metals, utilizing knowledge of production specifications, properties and characteristics of metals and metal alloys, and engineering principles: Conducts research and development investigations to develop and test new fabrication processes and procedures, improve existing or develop new welding equipment, develop new or modify current welding methods, techniques, and procedures, discover new patterns of welding phenomena, or to correlate and substantiate hypotheses.
• Prepares technical reports as result of research, development and preventive maintenance investigations.
• Establishes welding procedures to guide production and welding personnel relating to specification restrictions, material processes, pre- and post-heating requirements which involve use of complex alloys, unusual fabrication methods, welding of critical joints, and complex post heating requirements.
• Evaluates new developments in welding field for possible application to current welding problems or production processes.
• Directs and coordinates technical personnel in performing inspections to ensure workers' compliance with established welding procedures, restrictions, and standards; in testing welds for conformance with national code requirements; or testing welding personnel for certification.
• Contacts personnel of other agencies, engineering personnel, or clients to exchange ideas, information, or offer technical advice concerning welding matters.
• May perform experimental welding to evaluate new equipment, techniques, and materials. ZUHAIR FAYEZ PARTNERSHIP CONSULTANT
Abha, K.S.A
January 2012 to November 2016
Designation: Mechanical Engineer (Consultant)
Project: King Khalid University (Plant Facilities) - Abha, K.S.A. Job Description:
• Preparation of monthly progress report base from approved RFI (Request for Inspection) summary of mechanical and piping works [fire pipes, gas and oil pipes, pumping station, HVAC, boilers] with reference to bill of quantity (BOQ).
• Supervise the inspection of installed equipment as requested by general contractor base from the mechanical shop drawing consider the technical query.
• Inspection of material delivery submitted necessary for the project be approved base from technical submittal and finalize by ZFP committee.
• Provide technical guidance to general contractor in related mechanical equipments and piping works following the specification and standards.
• Estimate the technical specification required to prove the data submitted by general contractor will coincide with the specification initiated with the tender shop drawing.
• Preparation of material submittal of the contractor for the assessment of their material request use to the project and coordinate with material committee.
• Evaluation of technical query submitted by contractor based from approved drawing and site condition being finalized by senior engineers.
• Assessment of the plant health and safety procedures and program.
• Preparation of testing and commissioning procedures of a plant following the standards, specifications and the manuals of equipment connected and installed.
• Conduct a regular meeting with the plant construction team regarding the progress at site and solve the issues that arise.
• Plans and organizes the day-to-day programs and operation. Mechanical Engineer
CLASSICAL PALACE CO - Doha, QA
December 2010 to December 2011
Project: Hotel and Housing
Job Description:
• Supervise the installation of mechanical facilities (fire fighting, gas and oil pipes, pumping station, HVAC, boilers) with reference to approved mechanical drawing.
• Preparation of monthly and weekly report for the progress of work being accomplished use for billing.
• Provide information and technical requirement of equipment use for the project. The calculation regarding the performance of mechanical facilities.
• Coordinate with the purchaser for the specification and standards require with the design and performance of machinery to be purchase.
• Preparation of testing and commissioning of finished project ready for handover and subject for approval of all concern Engineers.
• Coordinate with the consultants, manufacturer and supplier in the required testing of installed equipment with reference to the testing and commissioning procedures. Mechanical Engineer
Shinhan Engineering and Construction Co - Tripoli, LY June 2009 to June 2010
Project: Hotel Refurbishment Project
Job Description:
• Preparation of daily mechanical construction report subject for the approval of mechanical consultants covering the RFI to execute the installation.
• Supervision and inspection of all material requirements and installation of mechanical facilities (fire fighting, gas and oil pipes, pumping station, HVAC, boilers).
• Coordinate with mechanical design department to re-design the complicated drawing.
• Organize the system in concern with the manpower doing the job following the systematic work.
• Submit a letter consisting the material requirement base to material submittal and committee's approval to all approved supplier and manufacturer providing the material quoted price considering the least date to be acquired.
Mechanical Engineer
Acwa Power Sazakura Co - Jeddah, SA
March 2007 to March 2009
Project: Desalination Plant Refinery
Job Description:
• Preparation of designed approved mechanical shop drawing.
• Review the approved shop drawing based from applicable specification and standard.
• Assign a list of manpower for a scheduled work, necessary equipment and tools use for executing the mechanical and piping works(fire fighting, gas and oil pipes, pumping station, HVAC, boilers)installation.
• Coordinate with the surveyor for the layout of the plant foundation.
• Assessment of each facilities arrange and prepare for installation base from shop drawing.
• Coordinate with separate discipline: structural, electrical and architectural department for the organized execution of works.
• Preparation of daily and monthly report submitted with the management based from work status and accomplishment for the interim payment and progress billing.
• Supervise the installation of mechanical facilities (fire fighting, gas and oil pipes, pumping station, HVAC) as per approved shop drawing, standards and specification of the host country.
• The project completed need to submit a testing and commissioning procedure subject for the approval of all concern discipline.
Mechanical/Workshop Engineer
BAE Systems - Riyadh, SA
March 2001 to May 2005
Job Description:
• Supervise the Staff of maintenance for the scheduled scope of mechanical works within the British facilities compound.
• Supervise to maintain the operation of cooking facilities, air-conditioners, freezers, cold storage and boilers in the kitchen.
• Arrange the operation of sewage treatment plant and its pumping station following the daily maintenance program.
• Installation of new facilities (fire fighting, gas and oil pipes,pumping station,air condition).
• Organize a manpower supporting the necessity of the residence.
• Provide an emergency assistance when the residence needs an assistance for a necessity of transport vehicle, manpower assistance and equipment.
Workshop Manager
Paombong, Bulacan - PH
June 1998 to February 2001
Job Description:
• Provide a maintenance services to the local constituents for their home appliances
• Troubleshoot the appliances based from the performance of its normal operation.
• Supervise the installation of newly purchased units.
• Mentain the electrical wire installation and repair.
• Repaint all mechanical and electrical equipment. Refrigeration and A/C Instructor
Meralco Foundation Institute
October 1996 to November 1996
Job Description:
• Teach the theoretical system of refrigeration and air- conditioning
• Train the student in the actual hands on troubleshooting and repair of a/c and refrigeration system.
• Teach the latest technology related to the application of a/c and refrigeration system.
• Provide an information and guidance for the review and orientation in the licensure examination for an a/c and ref. technician.
Project Engineer
Supertech Industrial Corporation
March 1995 to 1996
No. 18 Hernandes Ave.,San Antonio Valley 111
Paranaque, M. Mla.
Designation: Project Engineer
Job Description:
• Inspection of the power plant (Boiler and Pressure Vessel), gathering data regarding the required services necessary for the plant.
• Design of plant's requirements with its accessory.
• Submit a quoted prize for the designed facilities and auxiliary.
• Fabrication of facilities after the materials was purchase.
• Testing and commissioning of installed facilities.
• Provide a trained technician for operation of the plant within a range of one (1) month. Trainings and Seminar Attended:
Course: Venue:
1) Welding Engineer John McGregor Marineweld Training Center B1697- Pres. Quirino Ave.,Pandacan,Mla. Phils 1101 2) Basic Occupational Safety Coshemap Training Institute and Health Course (BOSH) 3rd Floor Esther Bldg, 1945 Taft Ave., Malate Manila, Philippines
May 27,2014
INTEREST:
• Research and develop an equipment applicable in the project for the purpose of assisting and mobilize the facilities within the range of target operation and program.
• Construct a program to organize the personnel for more productive and systematic way to follow An applicable way to meet the Company's demand and requirements. Education
B.S.M.E.
JOHN MCGREGOR MARINEWELD TRAINING CENTER
2019
BACHELOR OF SCIENCE IN MECHANICAL ENGINEERING in MECHANICAL ENGINEERING
Technological Institute of the Philippines
1984
Skills
• Project management,project supervision,operation and maintenance with sahety procedures application.
• Research
• Project Management
• Presentation Skills
• ASME codes & standards
• Mechanical engineering
• Process improvement
• SolidWorks
• Data Analysis
• Recruiting
• SolidWorks
• Process improvement
• Mechanical engineering
• Mechanical engineering
• Budgeting
• Employee Orientation
• Teaching
• Writing Skills
• Management
• Analytics
Languages
• English - Fluent
Certifications and Licenses
Registered Mechanical Engineer
August 1986 to December 2022
This certification applies in the practice of my profession as a Mechanical Engineer which is stated in the by laws govern in the Republic of the Philippines with the duration stated in the certificate was at the professional capability of the holder to be apply during the term and tenure in the validity of this license.