Clean Fuel Foster Wheeler
Resume:
ALBINO BABIERA LACANARIA
Prk.**-A, Zone *, Fuentes, Maria Cristina, Iligan City
Mindanao, Philippines, 9200
Mobile No. +639********* /965********
E-mail address: adnu6d@r.postjobfree.com
adnu6d@r.postjobfree.com
adnu6d@r.postjobfree.com
CAREER SUMMARY / OBJECTIVE
Seeking a career opportunity in a well stablished Company that would enhance my skills and make use of my experience and academic background.
KEY QUALIFICATION AND SKILL
Dynamic profession with more than ten (10) years of experiences in Electrical installation and testing, commissioning and inspection services particularly in Oil and Gas company.
More than twenty (20) years of experience in Electric Utility Franchise that includes HV/LV Transmission and Distribution lines, HV/LV power transformers servicing and testing, Oil Circuit Recloser, and Oil Switch installations, and Programming and installation of KV2C+ multifunction meters.
QA/QC Documentations and Implementations:
oReviewed and approved QCP, MS, and ITP
oInspection request (RFI)
oMaterials review and inspection (MRI)
oQC and Safety site audit
oARR and Daily Surveillance Focus Assessment.
Good Site Coordination and Supervision
PROFESSIONAL EXPERIENCE.
QA/QC Engineer-Electrical, April 23, 2016 – December 31, 2019
KNPC Clean Fuel Project, Kuwait
Wood Co./ Amec Foster Wheeler
Work Description:
Review and ensure that all applicable Methods are well executed (Method Statements and Quality procedures.) Implement Quality Programmed Plan, implement programs, including tracking, analyzing, reporting, and problem-solving and quality control procedures.
Review and comments on revisions of project standard. Perform in depth review to verify specification on project design and construction stage.
Perform variety of complex inspections jobs within the discipline provide day to day work directions as required for inspection in the project.
Ensure work performed conforms with engineering specifications and monitor implementation of project QC programs.
Inspect high and low voltage termination, splicing, and cable pulling operations and substations. Inspect below and above ground electrical installation and grounding system installation. Inspect and/or test transformers and switchgears. Inspect on electrical equipment installations e.g. Motors, HV/LV Switchgears, MCC’s and Panels, generators, transformers and switches and other miscellaneous items.
Write inspection report, non-compliance report, prepare and maintain inspection reports
Act as representative to (or Act on behalf of or deputize for) Commissioning Engineer, as and when Pre-Commissioning/Commissioning activities of all electrical equipment (such as HV/LV Switchgears, HV/LV Power Transformers, Panels and Distribution Boards) required or as requested to witness.
Attend Mechanical Completion Walk Down prior to Hand-Over The project.
QA/QC Inspector, E & I, May 03, 2012 - December 15, 2013
Shah Gas Development (SGD) Program, Abu Dhabi, UAE
Samyoung Corporation
Work Descriptions:
Attend all inspections, testing and Commissioning of all activities.
Serves as Electrical QC Engineer on site development for all E&I activities (Cable Tray, Cable Laying, instrument equipment) and HVAC works.
Performs daily and pre-inspection for the preparation of contractor and client representative/consultant inspection.
Coordinates all quality issues of on-going projects.
Ensuring that the method statement is properly executed.
Responsible on filling up the quality forms before submitting to QA/QC Engineers.
Carry out other duties as required by Project Management and Project QA/QC Manager or Senior QA/QC Engineer
QC Engineer, August 23, 2010–October 30, 2011
Oil and Gas Tankage Saudi Aramco, Ras Tanura, KSA
Arabian Fal Company
Work Descriptions:
Ensure all materials delivered are as per data sheet, approved and are properly stored.
Performs daily and pre-inspection for the preparation of client representative/consultant inspection.
Ensure all specified Standards are available for reference and their requirements observed.
Visit the site and Assist inspections to assure required standards are achieved.
Perform daily inspection reports for QC Manager and Project Manager
Track, identify, and report quality related trends from the inspection reports.
Reviews and approves the contractors’ quality documentation and implements contractor audits as well.
Knowledge/Implementation of Corrective & Preventive Action Plans.
Coordinates with other departments within the organization and customers and resolve issues arising from quality control inspections.
QC Inspector, March 8,2008 – March 11, 2010
Saudi Kayan Petrochemical Complex, Jubail 31951-K.S.A.
M.S. Al-Suwaidi Industrial Services Co. ltd.
Work Description:
Attend all inspections, testing and commissioning for all electrical system activities.
Performs daily and pre-inspection for the preparation of contractor and client representative/consultant inspection.
Ensuring that the method statement, and Quality Control Procedure are properly executed.
Responsible on filling up the quality forms/RFI before submitting to QA/QC engineers.
Submit daily, weekly and monthly reports for QA/QC Engineers.
Attend weekly QC and Safety audit at site.
Site Supervisor (E & I), December 2, 2005 – December 15, 2007
Rabigh Refining and Petro Chemical Company, Rabigh, K.S.A.
M. S. Al-Suwaidi Industrial Services Co. ltd.
Work Description:
Assist the site engineer in implementing the approved drawing.
Monitor all the execution and installation works. Attend inspection, testing and commissioning works together with QC inspector.
Responsible for the result of inspection activity based in acceptance criteria on the documented QC procedure.
Responsible for the owner’s signature after the result of all examination test.
Inspection in the witness point required which shall be accepted.
Responsible for insuring the inspection activities are accomplished.
Monitor and perform work progress to site engineers and construction manager.
Staff Engineer – Instrumentations, November 10, 1998 – October 3, 2005
Electric Utility Franchiser, Iligan city, Mindanao, Philippine
Iligan Light and Power Incorporated
Work Description:
Responsible for the proper usage of testing instrument and other equipment like TTR, Oil tester, hi-pot, insulation and resistance tester and oil purifier/filtering machine.
Responsible for the proper installation of OIL CIRCUIT RECLOSER and OIL SWITCHES.
Responsible for the proper installation and programming of KV2C+ multifunction meter.
Conduct quarterly servicing and preventive maintenance of all substations.
Supervise and direct linemen/ technician assigned under Me
Desk Officer Date, August 29, 1996 – August 18, 1998
Electric Utility Franchiser, Iligan city, Mindanao, Philippines
Iligan Light and Power Incorporated
Work Description:
Direct actions or prioritize the emergency problem such as
Over voltage in secondary line that cause damage to Customer’s appliances
Secondary line outages.
Primary outage-sectional
In case of fire
Block out likes,
Situations:
A.Hazardous situation threatening the public safety.
B.Transmission lines which delivers pow substations.
C.Substations, which distribute power to several thousands of customers.
D.Feeder lines from substations which affect large
numbers of customers.
E.Primary lines which serve between five and thirty
costumers.
F.Outages affecting individual costumers.
Technical Services Dept- Leadman, October 1,1990 – August 17, 1996
Electric Utility Franchiser, Iligan city, Mindanao, Philippines
Iligan Light and Power Incorporated
Work Description:
13.8KV/240V power transformers testing and services.
Metering In charge for preventive maintenance, Cleaning, Replacement of defective meters, and adjusting of regards to efficiency of meters.
Trouble shooting of kilowatt hour meters for Industrial loads.
Inspecting of all kilowatt hour for all Residential users, checking the load capacity of each residential and Industrial consumers.
Checking of all daily activities for the replacement of all stuck-up meters including Residential, commercial and Industrial Meters.
Act as a supervisory in behalf of the absence of supervisor to Supervise and direct linemen/ technician assigned under Him.
Inspection and testing of kwh-meters, three phase and single phase, in site and on laboratory.
QUALIFICATION
Professional Regulation Commission Licensure Examination for Electrical Engineer,
October 22-23, 1986, - Passed.
PERSONAL DATA
Date of birth: 16th December 1963
Marital Status: Married
Religion: Roman Catholic
Nationality: Filipino
Gender: Male
EDUCATIONS
Bachelor of science in electrical engineering, 1986 Mindanao University of Science and Technology- Northern Mindanao, Lapasan, Cagayan do Oro City. Graduated
SEMINAR ATTENDED
SPECIAL LINEMEN’S UPGRDING PROGRAM
MSU-IIT and ILPI, Sept. 3 - October 1,1994
TRANSFORMER ENGINEERING
ILPI, - June 27, 2003
Elina Tower Inn, Iligan City, - April 15, 2004
ORGANIZATION
INSTITUTE OF INTERGATED ELECTRICAL ENGR.
Life member
COMPUTER SKILLS
Good User for Microsoft Office.
Internet Applications.
I hereby certify that the above mentions are true and correct to the best of my knowledge.
Albino B. Lacanaria
Applicant
Contact this candidate