Engineer Mechanical

*

MOHASSIN ALI Mob: +971-********* / +971-*********

Abu Dhabi, UAE adczum@r.postjobfree.com

ENDEAVOUR

Exploit my accumulated expertise in Oil/Gas/Infrastructure/Plumbing in a pancontinental, transcultural milieu. Put in my Technical proficiency, Problem Solving, Multitasking and communication/negotiation skills in varying and challenging situations to potential outcomes. PROFILE

Young and enthusiastic Mechanical Engineering Graduate

Exceptional performer with companies in GCC and India operating in engineering, procurement, construction, oil & gas and Infrastructure.

Well versed in preparation of MTO’s and Method Statement as per project requirement, Standards and specifications.

Aware of different piping material specifications and its compatible piping components

Well aware about the installation and Tests for GRP and concrete manholes/Catch Basins for Sanitary Sewer and Storm Drainage Lines .

Well aware and has good knowledge in Installation of Plumbing Accessories. Pressurized Water lines and Sanitary Sewer Lines.

Proficient in installation of duct banks and direct buried pipes as per the project requirement and standards.

Hands on experience in repair of underwater Pipelines by the usage of Composite Repair Material(Special Procedure).

Able to design the piping and equipment layout for in an optimized manner to accommodate the requirements from all disciplines and Client. Able to generate and verify independently the various outputs from piping department like Piping Isometrics, Piping General Arrangement drawing, Material list, Piping Support Layout etc.

Able to formulate the piping stress specifications, Critical pipe line list. Hands on experience on stress analysis of piping system including piping connected to nozzles, Pumps etc.

Highly capable to work in tight deadlines and manage multiple concurrent project tasks and demonstrate an ability to work under pressure and have a flexible disposition.

Able to demonstrate/ develop inter – personal and organization skills for project planning, management of team of engineers and draftsmen. Priorities demanding workloads as an enthusiastic team leader.

Able to supervise site Labour and Sub Contractors and ensure that the required productivity and quality for the work are met as per the project drawings, specifications and standards.

Ability to work in confined spaces or extreme environments.

Well aware about the construction safety requirements at site for ensuring safe work to protect the lives of fellow colleagues and to maintain the name of the organization.

Demonstrated efficiency through speed and flexibility with constant improvement, in global and multi culture environment.

Competent multitasking [with minimal supervision] professional in a fast-paced, collaborative environment

Noted for leadership, efficiency, accuracy, and cost reduction

Accomplished communicator with an ability to cultivate and preserve sound working relationships

Committed to performing professionally.

WORK EXPERIENCE

Rawabi Specialized Contracting Co.-Rawabi Holding, Saudi Arabia December 2016 – Jan 2020

RSC is a member of Rawabi Holding Group of Companies, one of the leading industrial players in the region with headquarters in Al- Khobar in the Eastern Province of Saudi Arabia. Although it's independent, RSC benefits from the support of its sister companies in Rawabi Holding as well as its affiliation with international companies that provide additional strength and flexibility to meet any requirements

2

RSC list of clients includes Saudi Aramco, SABIC Group of Companies, Saudi Electricity Company (SEC), Marafiq, Ports Authority, Ministry of Defense and Aviation (MODA), Royal Commission for Jubail and Yanbu, Saudi Aramco Mobile Refinery (SAMREF), Saudi Aramco Shell Refinery Company (SASREF), Saline Water Conversion Corporation (SWCC), Ministry of Water (CWCC), Saudi Binladin Group, Cement Factories, UHDE Arabia Ltd., Nesma & Partners, Bechtel, Saudi Oger, Sadaf, Petrokemya, Hadeed and many more. Mechanical Superintendent – Upgrade of Fire Protection and Industrial Drainage System at Turaif Bulk Plant (Saudi Aramco) April 2019 – January 2020

Preparation of MTO for the materials to be used at site as per Saudi Aramco Standards and specifications.

Assisting in preparation of shop Drawings for submission and approval to Saudi Aramco.

Raise Technical queries (TQ), to ensure the design requirements are met with the project standards and specifications and as per the existing site condition.

Coordinate with the Engineering and Client for solving the raised TQ’s.

Preparation of method statement for the work to be done at site as per the required standards and specifications.

Review of Materials for technical acceptance prior to procurement as per the project requirement and Aramco Standards and Specifications.

Ensuring the work is completed as per the approved Baseline Schedule and given Budget.

Ensuring the work is done as per approved IFC drawings, shop drawings Standards and Specifications of the project.

Coordinate with the material receiving inspector to ensure that the materials are delivered at site are as per the Project requirement.

Preparation of Welding map for the fabrication of the Pipe spools.

Preparation of Quantity and Man-hours for Change Orders and negotiating/Discussion of the same with Project Management team.

Mechanical QA/QC Engineer–SAMREF Housing

Infrastructure Project (SAMREF/Royal Commission- Yanbu) May 2018 – March 2019

Prequalification and Submission for Materials to be used.

Ensure the delivered materials is as per the relevant Project Specifications and approved submittal

Raise the Request for Inspection and ensure the works are conducted as per the relevant project drawings and project Specifications

Consult with the Client regarding Engineering Problems.

Preparation of Inspection and Test Plan for all mechanical related works as per the Project specifications.

Preparation of Initial acceptance of project related to all mechanical scopes.

Consult with the Material Supplier to maintain Quality Products as per the Project Specifications and requirements.

Mechanical Site Engineer–Construction of 230/69KV

BIS Substation (National Contracting Co. /SCECO)

December 2016 – April 2018

Site Supervision with respect to all Plumbing and Electrical Piping works.

Ensure work Permits (Confined Space, Hot Work, Lifting etc.)-Permit Receiver

Execute works as per Drawings and Project Specifications.

Consult engineering problems.

Ensuring material issue and shifting to site.

Supervision of Site Labor and Sub Contractors.

Preparing Daily and Weekly reports.

Coordination with Project Manager, Consultant and client regarding works and Inspection.

Act and follow the instruction of Project Manager, Consultant and Client. 3

Ensure works are completed in scheduled time.

Ensure materials assigned to project are utilized according to allocated budget and completed as per design.

Inspection of Plumbing and Electrical Piping Works with the Client and Consultant. Energy Middle East Oil & Gas Services LLC-Belbadi Group, UAE February 2014 – January 2016

Energy Middle East Oil & Gas Services LLC is the Extension of BELBADI Group into the Oil & Gas Sector. ME is the brainchild of professionals with vast experience in the oil & Gas Sector having executed major projects across the Middle East. Client requirements are met by Divisions specializing in Machine Shop, Agency, Projects, Manpower Secondment. We have acquired and continuously improving on the above capabilities. EME has tied up with major manufactures of Oilfield equipment and also major service providers in the Oilfield, to market their products and services in different markets to major oil companies.

Mechanical Site Engineer –Strategic Tunnel

Enhancement Program (Drake and Scull/ADSCC )

February 2014 – January 2016

Overall supervision of works at site including HSE.

Ensure work Permits (Confined Space, Hot Work, Lifting etc.)

Execute works as per Drawings and Standards.

Consult engineering problems.

Supervision of Fabrication and Erection of Structural and Piping Works.

Ensuring material issue and shifting to site.

Supervision of Site Labor and Sub Contractors.

Preparing Daily and Weekly reports.

Coordination with Project Manager, Consultant and client regarding works and Inspection.

Take action and follow the instruction of Project Manager, Consultant and Client.

Ensure works are completed in scheduled time.

Ensure materials assigned to project are utilized according to allocated budget and completed as per design.

Chenkuttavan Engineering & Consultancy Services, Thrissur, India December 2012 – January 2014

The Chenkuttavan Engineering and Consultancy Services do FEED for well reputed companies like GALFAR, Perfect International who are working with world renown OPCO’s like PDO,Qatar Petroleum etc. Chenkuttavan Engineering and Consultancy Services are well reputed with Oil & Gas Companies for Piping and Pressure Vessel Design.

.

Piping Design Engineer- FAHUD Oil Field

Surface Expansion Project. (GALFAR/PDO)

December 2012- June 2013

Checking ISO metric and GAD drawings.

Preparation of wall thickness and Material Take-Off.

Stress Analysis of Piping.

4

Piping Design Engineer- Saih Rawl Gas Lift/Export

Compressor FED & DD (Perfect International Sharjah) June 2013- January 2014

Checking ISO metric and GAD drawings.

Preparation of wall thickness and Material Take-Off.

Stress Analysis of Piping.

EDUCATION

SCMS School of Engineering and Technology, Ernakulum, Kerala B. Tech., Mechanical Engineering, 2008-2012

Grade : First Class

EXTRA CREDENTIALS

Post Graduate Diploma in Piping and Pressure Vessel Design

Short Course in Design of HVAC and Fire Fighting System

AutoCAD

Solid Works

MS Office [Word, Excel, Power Point]

BYTES

English, Hindi, Malayalam, and Tamil are my languages of taste. Have a very basic knowledge in Arabic.

My passions include Talking, Organizing, Travelling, Sports, Tackling near-impossible situations.

Contact this candidate