Manager Engineer

Detailed Resume

Md. Gausul Azam Kadri

COUNTRY ADDERESS

S.K.MD. ALI SIDDIQUE

AT&PO: RATAN PARAULI

DISTT: SIWAN, BIHAR

INDIA

PIN:841242

Skype ID: mdgausul281

ada5fx@r.postjobfree.com

Mob. 009**-*********

0091-900-***-****, 887-***-****

Subject: Application for the post of…….QA/QC Engineer Electrical & Instrument

Respected Sir,

I Md. Gausul Azam Kadri am working with Team Time Company-Nasser’s. Al-Hajri Corporation Company as a QA / QC Supervisor - Instrumentation Since 11 September, 2018 to Till date in Jazan SAUDI ARAMCO JIGCC Package # 01, in JIZAN, SAUDI ARABIA. During my Educational & Professional life I have acquired the knowledge of Planning, scheduling, inspection and monitoring, Project Management and Safety & Quality Management etc by using computer tools like, MS Office, C, C++, etc.

I would like the opportunity to put my energy and enthusiasm as an exertion to prove myself as an asset for your esteemed organization.

Looking forward to hear from you.

Yours Sincerely,

Md. Gausul Azam Kadri

Encl:

Curriculum Vita

Resume

MD.GAUSUL AZAM KADRI

QA/QC Supervisor (Electrical & Instrumentation)

Personal Information

Name : Md. Gausul Azam Kadri

Nationality : Indian

Age : 38

Date of Birth : 20 July 1979

Educational & Technical Qualifications:

(1) Three year’s DIPLOMA in Electronics & Communication Engineering.

(2) Bachelor of Technology in Electronics &Tele Communication.

QA/QC Approval:

1.Saudi Aramco Total Refining Project (SATROP) Saudi Arabia.

2.Saudi Aramco Dow Chemical Project (SADARA) Saudi Arabia

3.AIRPRODUCTS, JIGCC Project. (Air Separation Unit) Saudi Arabia.

4.SAUDI ARAMCO, JIGGC Project Package #01,SAP NO# 80005505

INSTRUMENTS HANDLED

Smart series I/A series transmitter for pressure, flow, level and temperature of Rosemount, Honeywell, FOXBORO, and ABB make, level transmitter of MASONEILAN, FISHER FOXBORO make.

Magnetic flow meter, mass flow meter, venture, vortex meter, turbine meter, Ultrasonic Annubar etc.

Control valves of Masoneilan, Fisher, Kent-Introl, Guide, IL Valvetek etc.

Motor operated valves and its monitoring system.

Handled H2S, LEL, FIRE,heat, and Manual Call Points etc STC. of Sieges General monitors and gas Detectors.

SYSTEM HANDLED

Rotork, Biffi MOV’s and their DCS interface.

Bentley Nevada for Axial, Thrust, Speed, Fin Fan Vibration and Rotations.

FOXBORO DCS.

HONEYWELL TDC 3000 System.

ABB DCS.

EMERSON Delta V System..

Allen Bradley PLC & STEP # 7

ICS Triplex Redundant ESD System.

Contact No. : 0091-900-***-****.

00966- 570440107

Email Id : ada5fx@r.postjobfree.com

Present Address : M.M. Conley, Siwan, Bihar, 841226 INDIA.

.

Job profile

Total Year of experience : 17 years and 10 months (13 year’s gulf, 5 year’s India)

YEAR

COMPANY

COUNTRY

DESIGNATION

FROM

TO

10,Sept,2018

Till date

TTC - NSH

KSA

QA/QC Supervisor (Instrumentation)

15,April,2017

10,Sept,2018

NSH- Air Products

KSA

QA/QC Supervisor (Elect. & Inst.)

26,Sept.,2013

06, Sept,2016

Daelim Saudi Arabia ltd

(DOW-SADARA)

K.S.A

QA/QC Supervisor (Elect. & Inst.)

20,April,2011

25,August,2013

Daelim Saudi Arabia ltd

(Jubail Export Refinery)

K.S.A

QA/QC Supervisor (Elect. & Inst.)

5,June,2009

31,March,2011

Daelim Saudi Arabia ltd

(Saudi Polymer)

K.S.A

QA/QC Inspector (Elect. & Inst.)

22,Nov,2008

30,May,2009

Larsen &Toubro Ltd.

INDIA

QA/QC Engineer (Elect. & Inst.)

24,June,2007

20,Nov,2008

Dodsal Engineering & Construction Pte. Ltd.

QATAR

QA/QC Inspector (Instrumentation )

3,June,2006

5,June,2007

Petron India Pvt.Ltd.

INDIA

QA/QC Inspector (Elect. & Inst.)

11,March,2003

25,March,2006

Mohammad AL Mojil Group (TSD)

K.S.A

Instrument Supervisor

12,Feb,2002

31,Jan,2003

Blue Star Ltd.

INDIA

Instrumentation Engineer

5,July,1999

30,Sept.2001

Supertech. Instrument services (I) Pvt. Ltd.

INDIA

Instrumentation Trainee Engineer

Work Experience

Company : DAELIM SAUDI ARABIA LTD.

Position : QA/QC Supervisor (Electrical & Instrumentation)

Duration : 20, April, 2011 to 30 October 2013

Project : SATROP (Saudi Aramco Total Refining and Petrochemicals)

SAUDI ARABIA

Responsibilities include:

Responsible for all quality inspection examination test problem which is heaving a serious or significant impact to the project cost & schedule should be referred to and consulted with senior engineer or co-ordinate each discipline supervisor construction, superintendent and all counter-part of function at site. Safety, Security section at site, Client quality control section, Local inspection agents, Vendor and subcontractor implementation of quality control.

Leading the team of QA/QC Inspectors for monitoring the on-going daily Construction activity.

Reviewing the construction method statements and making Comment as per project specification.

Close supervision to E and I Inspector’s with regards to installation, testing Pre-Commissioning of Electrical and instrumentation scope of work.

Imitating internal/External Log Book Entries/NCR to construction crew for effective implementation of project quality plan.

Coordination with client inspector’s for getting the feedback for open Log Book Entries/NCR

and preparation of Root cause analysis, Preventive actions and Corrective actions to close the violations. Maintaining Summery reports.

Familiar with Inspection standard procedure and applicable code. Preparation of corrective recommended action for NCR, Preparation of inspection check list quality plans, method statement for instrumentation calibration, Field calibration and others construction activities. Familiar with international standard UL, ISA, NEC, NEMA, NFPA, IEC & IEEE, in order to follow the quality Work. Also aware of HSC safety rule and regulation strictly obediently adopted.

Detail construction drawing review, Follow up Quality Control Manuals, QA/QC procedures and Inspection and Test Plan for main and subcontractor during construction & maintenance.

Review and approval for the remedial measure for quality related problems.

Familiar with SAUDI ARAMCO ENGINEERING STANDARD and SABIC ENGINEERING STANDARD.

Material Inspection, Traceability and reviewing Test certificate for delivered Material from vendor/Supplier.

Materials receiving inspection of vendor packages or bulk items with complete certificates/ documents (P.O., packing list, Test certificate, compliance certificates etc).

Inspection of cable drums for their physical appearance, meggering and continuity testing, cable laying, glanding & termination, loop checking etc.

Installation inspection of marshaling cabinets, DCS/ ESD/ F&G/ VFD/FF/SIS/Bulk power Cabinet/Network Cabinet and their internal wiring details and inspection of all interfaces System with field instruments.

Installation Inspection of Impulse tubes, airline, pneumatic air header as per hook-up and AFC drawing. Inspection of pressure testing/ leak test of all pneumatic lines, Impulse line as per project recommended.

Inspection of calibration shop prior to start calibration and Inspection of all kinds of Instrument according to ITP/ Method of statement/ QCP/ Project specification.

Perform inspection and witness of Loop test, Function test, OTP (Operation test procedure) activities during commissioning with proper documents.

Confirm periodical calibration of testing for field equipment and test equipment.

Knowledge of Basic Process Control Systems (BPCS), Integrated Process Control Systems (IPCS), Machinery Protection Systems (MPS), and Safety Instrument Systems (SIS).

Participating in Internal/External quality audits.

Company : DAELIM SAUDI ARABIA LTD.

Position : QA/QC Inspector (Electrical & Instrumentation)

Duration : 05, JUNE, 2009 to 31, March, 2011

Project : SAUDI POLYMER’S (National Chevron Philips Project’s) KSA

Responsibilities include:

Regular surveillance/Inspection of construction activities as per project inspection and test plans.

Developing & Preparing ( ITP ) Inspection and Test Plan, ( QCP ) Quality Control Procedure and ( SAT ) Site Acceptance Test documents and records.

Store and maintain all quality records.

Co-ordinate with construction personnel about ongoing inspection issues.

Regular reporting to QA/QC Manager and discussion with Construction Manager and Project Manager on any major issues which require immediate action.

QC inspection for instrument/ system as per inspection and test plan, project specification and Client code.

Ensure all instruments were installed and tested as per project quality procedures and project specifications .

Inspection of cable trays, conduit, instrument installation, stanchion installation, marshalling cabinet and vendor skids and Instruments.

Pre – loop inspection and grounding system inspection.

Ensuring all instruments were installed and tested as per project quality procedures and project specification and preparation of quality forms for instrument installation inspection and all quality activity.

Witness and verify Continuity, Insulation and resistance test, HI-POT and Component testing for Medium Voltage & Low Voltage Cable and equipments.

Review Tested documentation, witness and accept all required Testing for Client.

Inspection of Bus Bar Installation, Circuit Breaker, Transformer, Bus duct, Isolator, Control and Relay Panel, Protective relaying, and DC Power supply systems.

Company : LARSEN AND TOUBRO LTD. INDIA.

Position : QA/ QC Engineer (Electrical & Instrumentation)

Duration : 22 NOV 2008 TO 30 MAY 2009.

Project : METHANOL REFORMER (Rastrya chemical & fertilizer’s)

INDIA

Company Profile:

Larsen and Toubro Ltd is a trusted EPC contractor in Electrical, Instrumentation & Control systems for a wide variety of industries such as Power Plant, Water Supply & Treatment, Chemical & Fertilizers, Oil & Gas fields, Cement industries.

Responsibilities includes

Inspection of field & control room instruments.

Inspection of Control Room Equipment Layout including cable routing, Control room & Plant Instrument grounding and panel base frame, MCT Layout.

Inspection of Process Hook up instruments, Analyzer hook up & Instrument’s air etc.

Conversant with Hazardous Area Classification

Hands on experience on monitoring and inspection of Erection & Commissioning of all types of Instruments like Temperature, Pressure, Level, Flow instruments & Analyzers.

Issued standard punch listing for outstanding works.

Review Test documentation and witness of all kind of acceptable test for Client.

Witness of Pre commissioning and commissioning testing.

Review Electrical and Instrument test packages; prepare QA/QC documentation for Turn over to client.

Performed MV/LV motor test, Solo run test, Lighting illumination test, Transformer oil filtration process with equipment vendor.

Familiar with the international industry codes and standards related to intrinsically safe systems and electrical systems for instrumentation.

Company : Dodsal engineering & construction pvt Ltd.

Position : QA/QC Inspector (Instrumentation)

Duration : 24th June 2007 to 20th Nov. 2008

Project : RAS GAS (Raslaffan LNG) QATAR.

Responsibilities include:

Regular surveillance/Inspection of construction activities as per project specification.

Store and maintain all quality records.

Co-ordinate with construction personnel about ongoing inspection issues.

Regular reporting to QA/QC Manager and discussion with Construction Manager and Project Manager on any major issues which require immediate action.

QC inspection for instrument/ system as per inspection and test plan project specification and client code.

Ensure all instruments were installed and tested as per project quality procedures and project specifications and preparation of QR forms (instrument installation inspection).

Inspection of cable trays, conduit, instrument installation, stanchion installation, marshalling cabinet, control cabinet, junction box installation, main and secondary cable installation.

Inspection of air and impulse tubing/piping installation.

Performed leak testing of air and impulse tubing/piping.

Inspection of line mounted and skid mounted instruments.

Performed material receiving inspection at lay down/warehouse

Inspection of system grounding.

Ensuring all instruments were installed and tested as per project quality procedures and project specification and preparation of quality forms for instrument installation inspection.

Company : PETRON INDIA LTD.

Position : QA/QC Inspector (Electrical & Instrument)

Duration : 03th June 2006 to 05th Nov. 2007.

Project : Reliance Industries, Jamnagar GUJRAT (INDIA)

Responsibilities include:

Monitoring the project reviewing the deviations reported. If any with the approved Quality plans.

Following a suitable start and approved procedures for the control of deviation from the job specifications.

Review Mandatory of QC Activity Steps for ITP.

Verify the Correct Materials are used for all works.

Issuing NCR for Violation from Specification during Work.

Preparation of Inspection Reports.

Well knowledge in P&ID, Hook Ups, Cable Routing, Cable laying, Wiring Diagram, Dressing, PP, QCO, NCR, RFI, Material check list, Punch list.

Company : Mohammad AL Mojil Group

Position : Instrument supervisor

Duration : 11th Mach 2003 to 25th March 2006.

Project : Yanpet, yanbu Industrial City (K.S.A.)

Responsibilities include:

Carried out construction work as per projects Specifications, Standard and detail Drawings.

Following Construction Method of Statements (CMS), Quality Control procedure

(QCP) and Inspection and Test plan (ITP).

Knowledge of Instrument Index, Instrument Loop Diagrams, P& ID, Hook-up’s, Instrument Typical Drawing’s, Equipment Lay out drawings Including Vendor Package detail drawings.

Supervise activities like Cable Laying, Glandding, Termination and insulation and resistance test.

Monitoring for construction work like Ladder tray’s /Support’s, Junction Box’s, Instrument Installation, and Impulse piping / Tubing Installation and instrument air lines as per hook-ups drawing’s and material data sheet.

Supervising for Installation of Control Room Cable tray’s and Wire way’s and base support’s like DCS, ESD and Fire and Gas system panel’s and also monitoring installation for Consoles and it’s accessories

Leading a group of technician’s for Loop Checking and Functional Test.

Coordinating QA/QC Personal and assigning for Punch List works.

Preparing Daily/Weekly Progress reports and planning for the next activity.

Company : BLUE STAR LTD.

Position : Instrumentation Engineer

Duration : 12th Feb 2002 to 31th Jan 2003

Project : Rajasthan Atomic Power Projects (INDIA)

Responsibilities include:

Monitoring daily Instruments installation and testing activities and verifying that it complies with the project specification.

Preparing daily documentation of the work progress.

Review Project drawings and apply contract codes, standards and specification.

Shall coordinate with other discipline Quality control inspectors for ensuring that all other discipline activities that require inspection within the Instrumentation construction program have been inspected and approved.

Redlining the drawings, termination schedules, Instrument Loop Diagram (ILD), Datasheets etc., as per the modifications made on site.

Prepare new Hook up drawings for any modifications and take the approval from the client.

Responsible for the inspection of installation of Instruments, Conduits and fittings (above and below ground), Cable trays/ladder racks and Cables, Junction Boxes, Control Panels, Consoles, wiring termination, impulse tubing as per the project.

Involved in loop checking and functional test.

Ensure that the loop folder submitted by the contractor contains all the relevant documents needed during the loop check.

Responsible for troubleshooting the problems occurred in the instruments during commissioning.

Coordinating with Vendors/Contractors to resolve quality and construction issues.

Review of Loop diagrams and functional loop and control schematics & Loop testing.

Company : SUPERTECH INSTRUMENTATION (I) PVT.LTD.

Position : Instrumentation Engineer (Trainee)

Duration : 05th July. 1999 to 30th Sept. 2001

Project : Reliance Petrochemical Navi Mumbai (India)

Responsibilities include:

Supervision, co- ordination, Installation and commissioning of various instruments and control systems.

Involved in instrument calibration.

Installation, SAT support, Loop checking and trouble shooting of various loops. Aggressive approach to meet targeted dates

Also involved in the loop testing and functional testing of systems as they were commissioned.

Preparing Daily/Weekly Progress reports and planning for the next activity

Calibration of various types of Instruments.

I hereby certify that the information given above is correct to the best of my knowledge and belief.

PLACE : Saudi Arabia

DATE : 04 Décember 2019 Md. Gausul Azam Kadri

Contact this candidate