Saudi Arabia Instrument Technician
Resume:
JAY-R TORNO CORTES
POSITION APPLIED
Instrument Foreman/Technician
OBJECTIVE
To enhance my professional skills, capabilities and knowledge in an organization which recognizes the value of hard work and trusts me with responsibilities and challenges.
EXPERIENCE
Ambatovy Nickel and Cobalt Mining Plant Madagascar South Africa
10-10-2022 - 10-02-2023
Instrument Technician
•Perform and conduct troubleshooting all instrument like on/off valve and control valve checking the feedback for close and open position include the command solenoid for opening and closing.
•Perform troubleshooting and calibration of process analyzers and detectors like PH, Conductivity,ORP using buffer solutions for detectors like hydrogen,ammonia and H2S using gas span and zero actual perform calibration.
•Perform troubleshooting and site calibration configuration all transmitter like pressure,flow,level and temperature.
•Perform troubleshooting of all switches and proximity.
•Perform modification and replacement of all instrument include cable,and tubing
•Conduct calibration everday of weighting scale
•Continue support to the operation and waiting for the call of DCS operators if something trouble for the instruments.
•Conduct PM or preventive maintenance of all instruments as per daily schedule.
MHPS-Mitsubishi Hitachi Power System Kenya East africa Olkaria V Geothermal Project
10-01-2019 - 12-18-2019
Instrument Supervisor
•Supervise to the H-young Contractor for the Calibration and Installation of all instrument
•Supervise the contractor for cable pulling,termination,and for installation of JB and Marshalling cabinets
•Supervise for the contractor for cable testing,meggering,loop checking,and function testing from field to DCS.
•Perform installation of TSI turbine supervisory instruments and set up Bentley Nevada proximity in turbine like speed, eccentricity,position,temperature and vibration for bearing number 1 or 2 include generator side.
•Perform final configuration of all instruments
•Perform and involved commissioning for instrumentation and support to the operation.
@
O
,
CONTACT
ad5b3b@r.postjobfree.com
Binanlutan Phase 2 Zone 7 Brgy.20
Victorias City Negros Occidental
LANGUAGES
English, Tagalog,Hiligaynon and
IIonggo
REFERENCE
Lenard Rosario - Ambatovy Nickel
and Cobalt Mining Madagascar
South Africa
ATEX Compex Inspector
ad5b3b@r.postjobfree.com
Ryuta Nagata - MHPS-Mitsubishi
Hitachi Power System
E&I Senior Engineer MHPS
Nagasaki Division Japan
ad5b3b@r.postjobfree.com
Hiroaki Araki - MHPS-Mitsubishi
Hitachi Power System
Electrical Erection and Testing SV
MHPS Mitsubishi Hitachi Power
System Nagasaki Japan
ad5b3b@r.postjobfree.com
Richard Forsyth - Goro Nickel Plant
New Caledonia
Lead Commissioning Engineer Acid
Leaching Area
ad5b3b@r.postjobfree.com
+687766892
Agustin Serina - Total Energies
Supervisor QA/QC Electrical &
Instrumentation
ad5b3b@r.postjobfree.com
PERSONAL DETAILS
Date of Birth : 22-10-1982
Marital Status : Married
Nationality : Filipino
Religion : Roman Catholic
Passport : P6397638A
Gender : Male
Driving Licence : F0609001355
Place : Phillippines
Saudi Kayan Petrochemical Plant Jubail Saudi Arabia 10-09-2017 - 07-11-2018
Instrument Technician/Foreman
•Perform shut down works and replacement job instrumentation work period
•Assist to the client for warranty period to the maintenance team.
•Assist to the instrumentation maintenance for final testing
•Perform configurations,loop checking and function testing of all instruments from field to DCS
•Perform bench calibration and field calibration
•Perform cable testing ang meggering or IR test of instrument cables from field to JB up to marshalling cabinet.
•Replacement of my tubing, instruments,cables,conduit,and cable trays.
•Termination of instrument cables from field instruments to JB up to SIH satellite instrument house.
•Disconnection and reconnection of instrument cables from field to JB up to Marshalling cabinet
•Removal of all instruments involved in shut down works need to be replaced as per client advise.
YANPET Yanbu Petrochemical Plant Yanbu Saudi Arabia 10-12-2015 - 31-12-2016
Instrument Technician/Foreman
•Perform shut down works and replacement job instrumentation work period
•Assist to the client for warranty period to the maintenance team.
•Assist to the instrumentation maintenance for final testing
•Perform configurations,loop checking and function testing of all instruments from field to DCS
•Perform bench calibration and field calibration
•Perform cable testing ang meggering or IR test of instrument cables from field to JB up to marshalling cabinet.
•Replacement of my tubing, instruments,cables,conduit,and cable trays.
•Termination of instrument cables from field instruments to JB up to SIH satellite instrument house.
•Disconnection and reconnection of instrument cables from field to JB up to Marshalling cabinet
•Removal of all instruments involved in shut down works need to be replaced as per client advise.
MHI Mitsubishi Heavy Industries Independent Water Steam Power Plant Project Rabigh Saudi Arabia
16-08-2014 - 27-08-2016
Instrument Technician
•Perform Bench calibration and field calibration of all instruments include stroking of all valves and dampers in the boilers.
•Perform loop checking and function testing of all instruments from field to DCS
•Assist to the client for commissioning stage up to start up and warranty period
•Perform calibration of analyzers like PH,ORP, Conductivity, in desalination area, water treatment,demineralized up to boiler water treatment area.
SAMREF Saudi Aramco ExxonMobil Refinery Clean fuel project Yanbu Saudi Arabia
01-01-2013 - 30-06-14
Instrument Technician
•Perform Bench calibration and field calibration of all instruments include stroking of all valves and dampers in the boilers.
•Perform loop checking and function testing of all instruments from field to DCS
•Assist to the client for commissioning stage up to start up and warranty period
•Perform calibration of analyzers like PH,ORP, Conductivity, in desalination area, water treatment,demineralized up to boiler water treatment area.
•Installation of instrument,stunchon, termination of instrument cable from field to JB and up to Marshalling cabinet OGC Obeikan Glass Company Yanbu Saudi Arabia
13-17-2010 - 17-07-2012
Instrument Technician/Team Lead
•Perform and conduct troubleshooting all instrument like on/off valve and control valve checking the feedback for close and open position include the command solenoid for opening and closing.
•Perform troubleshooting and calibration of process analyzers and detectors like PH, Conductivity,ORP using buffer solutions for detectors like hydrogen,ammonia and H2S using gas span and zero actual perform calibration.
•Perform troubleshooting and sitecalibration configuration all transmitter like pressure,flow,level and temperature.
•Perform troubleshooting of all switches and proximity.
•Perform modification and replacement of all instrument include cable,and tubing
•Conduct calibration everday of weighting scale
•Continue support to the operation and waiting for the call of DCS operators if something trouble for the instruments.
•Conduct PM or preventive maintenance of all instruments as per daily schedule.
EEI CORP VALE INCO Australia Goro Nickel Plant New Caledonia 23-11-2007 - 21-05-2009
Instrument Technician
•Perform Bench calibration and field calibration of all instruments include stroking of all valves and dampers in the boilers.
•Perform loop checking and function testing of all instruments from field to DCS
•Assist to the client for commissioning stage up to start up and warranty period
•Perform calibration of analyzers like PH,ORP, Conductivity, in desalination area, water treatment,demineralized up to boiler water treatment area.
•Installation of instrument,stunchon, termination of instrument cable from field to JB and up to Marshalling cabinet
EDUCATION
DBTI- Don Bosco Technical Institute
2006
Industrial Technology
TRAININGS
1.Instrumentation
2.ATEX-Atmoshere Explosive
•Level 0
•Level 1
3. Yokogawa Zirconia Oxygen Analyzers
Contact this candidate