Glenn Gattis

Fast learner

Virginia Beach, VA ***64

ad4syu@r.postjobfree.com

+1-214-***-****

A highly motivated professional minded person with analysis and technical skills in maintenance aviation. Strong ability to connect with my upper management and colleagues while utilizing hands- on experience that require self-confidence, understanding and the ability to communicate and provide excellent customer service to get the job done.

Willing to relocate: Anywhere

Work Experience

A&P Mechanic

Amentum

March 2020 to Present

Contact. Terry. Hatchet 757-***-****

C-130 J,H. Model. Depot maintenance. Install remove. Inspection sheet metal. Wing removal. And install. Rudder install and removal flap removal and install bladder removal and install install and remove dump pumps inspect. Write up defects. Install after repairs are made. Remove all fuel line for bladder and wings. Remove and inspect and repair and install boost pumps. Aileron removal inspect and repair, reinstall flap control Sys remove inspect and repair,reinstall. Etc A&P Aircraft Mechanic

DRS Technologies/ US Coast Guard - Elizabeth City, NC July 2017 to Present

Contact. Mark deSocio 757-***-****

• C130 Maintenance. Tanks. Wing removal and install, bladders. Testing. Fuel. Checks. Flags removal and install cargo door removal and install leak checks. Corrosion prevention elevator removal and install ramp door and cargo door r/install. Floors flap drive systems. Etc corrosion prevention sheet metal. Fabrication brackets. Braces. Removal off out board wings. A&P Aircraft Mechanic

DynCorp International / coast guard - Elizabeth City, NC March 2019 to March 2020

Hi Contact. Mark deSocio 757-***-****. Project management depot maintenance on c130 J,H models. For the coast guard. Remove and replace components corrosion prevention. Wing removal and install bladders removal and install flaps elevators removal and install rudder removal and install. Fuel line vent line hydraulic lines. O rings gaskets. Floors pals ramp doors sheet metal repairs QA inspections on parts and aircraft write ups

Janine Gonzalez 626-***-**** - Josh supervisor

Boeing - Covina, CA

January 2017 to June 2017

760-***-****

• 145 repair station / Disassembly, removal of airplane parts Boeing 737, 747, 757, 767, 777, ch-47, uh60

• Heavy maintenance a b c d checks interior/exterior maintenance AOG. For delta removal of parts for inventory

Supervisor Mr. Bruno

ST Aerospace - San Antonio, TX

March 2016 to November 2016

240-***-**** Worked as an A&P Mechanic with St Aerospace, using my mechanical experience/skills to manage, perform,C-130 J,H model inspections write up discrepancies md 11 airbus 300 600 dc10 737-***-***-*** overseas planes 777 flight controls landing gears removal and install engine removal and install interior work floors sidewall loading systems filters gaskets etc

• and accomplish all work in accordance with established standards and safety procedures. Line Maintenance Mechanic/ Delta

Atlantic GA

July 2015 to February 2016

30354

Contact: John Easley 501-276- 9175

• Short term assignment performed preventive maintenance to include installing, assembling, repairing Delta

• Aircraft components, etc. interior maintenance light mode wifi lighting, coin mats A & P Mechanic

ST Aerospace - San Antonio, TX

February 2013 to June 2015

78217

Contact: Ms. Kelly 210- 336-2205 Supervisor Mr. Bruno 240-***-****

• A highly talented Aircraft Mechanic with hands on experience in inspecting, testing, repairing, interior/ exterior

• Hands-on experience includes aircraft mechanical component, repair procedures and replacement of parts.

• Towing aircraft such as the 747 767 777 Delta planes and DC10 replacing or repairing worn or damaged components.

• Involved in the operation and maintenance of airbus planes required by FAA regulations. That includes repairing, and maintaining, disassemble, repair, and reassemble aircraft engines 737 & 747 Delta planes, Airbus 300 & 600, and MD11, C-130 J,H models forrest planes fires and other airlines such MB80 Boeing Allegiant Airline planes, Republic Air Argentina planes, Air Mexico planes, Southern Air, and Viva Airbus planes.

• Assemble and install electrical, plumbing, mechanical, hydraulic, and structural components and accessories, using hand tools and power tools.

• Work on CRJ 200 700 900 airplanes avionics to maintain, test, repair, and replace electronic systems

& subsystems on an aircraft to ensure all work meets quality standards and specifications.

• Performs assembly, repair, rigging and inspections on a variety of control systems.

• Utilizes precision instrument and equipment to inspect the airplane components like turbine blades for corrosions, cracks, and other problems.

• Inspect the various equipment and devices on aircrafts, including engines, landing gear, flight instruments, pressurized components, brakes, valves, pumps, and any other part of the plane that requires regular maintenance; read & comprehend written instructions and/or directions.

• Assembles precision mechanical and electromechanical components, repairs, modifies and installs various parts.

• Assemble and install aircraft systems including interior, exterior work, mechanical, and hydraulic.

• Provide ABCD checks, repair defective engine parts for reassembling and installing engine in aircraft.

• Use state of the art technology to ensure radar, radios, and navigation instruments function properly.

• Cleans aircraft, including exterior washing, waxing, polishing, and care of interior upholstery, carpet, wood work, leather; able to climb ladders & stairs, work in small spaces & restricted areas & lift up to 40 pounds.

• Interior work, includes co-pit, wardrows, galley, windscreens, passenger seats, floor boards, and overhead bends, lav assembly, tank assembly, forward lay, wall, aft lav, center & left 9-G, &

• cargo panel.

Aviation Maintenance Technician

AAR Aircraft Services - Hot Springs, AR

February 2009 to February 2013

Project Manager Jay Shackles 501-***-****

Aircraft Maintenance from the Aviation Institute of Maintenance 214-***-****

• Test engine and system operations; disassemble and inspect parts for wear, ping, or other defects; service and maintain aircraft systems, etc.

• Ensures radar, radios and navigation instruments function properly,

• Uses electrical test equipment to ensure that no wires are broken or shorted out.

• Follow trouble shoot procedures to determine the source of the problem.

• Replaces any defective electrical or electronic components, and removal of all interior component.

• Record and keep records and write reports on their preventative maintenance work as required.

• Perform & complete complex inspections, perform scheduled maintenance, and make any necessary repairs required by FAA regulations.

• Perform maintenance on jets & other aircraft of various sizes and types for major airlines.

• Do repair work, finding, and fixing problems that pilots describe, such as a faulty fuel gauge.

• Able to read gauges, understand instrumentation and diagnostic tools when assessing and repairing aircraft.

• Able to understand the root causes of aircraft problems and how to correct those problems.

• Use state of the art technology to ensure radar, radios, and navigation instruments function properly.

• Cleans aircraft, including exterior washing, waxing, polishing, and care of interior upholstery, carpet, wood work, leather; able to climb ladders & stairs, work in small spaces & restricted areas & lift up to 40 pounds.

• Interior work, includes co-pit, wardrows, galley, windscreens, passenger seats, floor boards, and overhead bends, lav assembly, tank assembly, forward lay, wall, aft lav, center & left 9-G, & cargo panel.

• Uses a wide variety of diagnostic devices and computers to assess and fix aircraft, and maintain aircraft standards as required by the Federal Aviation Administration (FAA).

• Remove & install landing gear flats, elevators, & rudders on airplanes in all types of weather and at high noise levels.

• Inspect the various equipment and devices on aircrafts, including engines, landing gear.

• Works on engines, service APU, remove and install parts of the APU.

• Apply hands-on experience approach that allows me to complete exciting projects dealing with aircrafts.

• Prioritize and manage multiple tasks efficiently for completion under time constraints.

• Performs other duties as assigned.

Available immediately Willing to relocate References on request. Education

Certificate in Airframe powerplant certification

Aviation Institute of Maintenance AIM - Dallas, TX June 2007 to February 2009

Diploma

Carver Vocational Tech High School - Baltimore, MD May 1981

Skills

• MAINTENANCE (10+ years)

• QUALITY CONTROL (10+ years)

• ENGINE MAINTENANCE

• TEAM PLAYER (10+ years)

• Airframe (10+ years)

• Apache (10+ years)

• Aviation (10+ years)

• Sheet Metal (7 years)

• Ordnance (10+ years)

• Troubleshooting (10+ years)

• Active Directory (10+ years)

• Plumbing (10+ years)

• Forklift (8 years)

• Networking (8 years)

• MS Office (8 years)

• Electrical (8 years)

• Security (8 years)

• Microsoft Word (8 years)

• Mechanic Experience (10+ years)

• Aircraft Maintenance (10+ years)

• Door Hanging (7 years)

• Woodworking (9 years)

• Quality Assurance (10+ years)

• Mechanical Knowledge (10+ years)

• Brake Repair (10+ years)

• Avionics (7 years)

• Assembly (10+ years)

• Equipment Repair

• Automotive Repair

• Assembly

• Quality control

• Root cause analysis

• Quality assurance

Military Service

Branch: United States Coast Guard

Service Country: United States

Rank: G12

Certifications and Licenses

Airframe & Powerplant License

Airframe & Powerplant Certification

January 2009 to Present

Airframe powerplant certification

TS/SCI

Secret Clearance

Additional Information

Summary of Skills:

• Attention to detail for completeness and accuracy, quality control.

• Good attendance, highly dependable, quick learner and team player.

• Customer oriented individual management with minimal supervision.

• Engine maintenance

Contact this candidate