Resume

Electrical Engineer Safety Training

Location:

Coimbatore, Tamil Nadu, India

Posted:

March 28, 2024

Contact this candidate

Resume:

RESUME OF ELECTRICAL ENGINEER-PARUL Pict.old (June,2023)

FILE NAME engineer,electrical,parul.doc

CONTACT DETAILS.

oTel.: Mobile(whatsapp) 91-98-425*-****

oE-mail ad4mys@r.postjobfree.com, ad4mys@r.postjobfree.com

o‘skype’ ID parulnaircbe1

o‘Linkedin’ ‘URL’ public profile http://linkedin.com/pub/gopalakrishnan-parul-nair/15/137/413

owww.facebook.com gopalakrishnan parul nair

PERSONAL DETAILS.

oNAME (As in passport) Parul Gopalakrishnan Nair.

oNATIONALITY Indian

oDATE OF BIRTH/ AGE 01st April, 1951./ 69 years

oMARITAL STATUS Unmarried.

oQUALIFICATION (EDUCATIONAL) --:B.Sc.Engineering (Electrical)(on 1972, from Regional Engg. College India).

oELECTRICAL LICENSE ‘C’ license (Electrical Supervisor’s license) Issued by Electrical Licensing Board, Govt. of India).

oPASSPORT DETAILS No.U5983887, valid up to 21/04/2030, issued at Coimbatore in India.

INTERNATIONAL CERTIFICATE OF VACCINATION:

o2nd dose of ‘covid-19’ vaccinated (covishield) on 01/12/2021,Precaution dose(Booster dose) on 17th July,2022, ’ Yellow Fever’ on 29/07/2005, ‘Hep B II’ on 26/02/2006, ‘Typhim I’ on 25/02/2006, ‘Influenza’ on 15/02/2006, ‘TWINRIX II’ on 19/07/2006.

MEDICAL FITNESS Examined by ‘AMAS Medical Services ‘Mumbai, India, Authorized International ‘SOS’ Doctor..

oDRIVING LICENSE Light vehicle driving License issued in India.

SAFETY TRAINING COURSES:

o‘HUET’ (approved by ‘OSPA’) certificate #1315 on 06/01/2013 by ‘SETRAC’college of offshore training, Mumbai, India.

oBasic Safety Training-Res.IMOA.891 (21)-Normam 24: On 03/02/2009, Cert.no.2110786 by “Falck Nutec”, Macae, Brazil.

oEnergy Isolation Awareness Training By Transocean: On 2/3/2009at Rig “Deepwater Discovery”.

oSafety Orientation Training by ‘OGRE’ (Oil Gas Resources Engineers)10/09/2013 at Dubai Dry Dock.

CAREER OBJECTIVE

oTo find a challenging in offshore/onshore oil/gas sector to meet my competencies, capabilities, skills, education and experience in the activities of construction, maintenance, testing, commissioning and startup the plant.

STRENGTH

oExcellent supervisory skills, including the ability to maximize performance by strategic assignment of tasks and assessment of available strengths among staff.

oHighly developed analytical, planning and implementing skills.

oPositively communicate and relate to people of all levels.

oHaving an insatiable appetite to spot, pursue and close project.

oKnowledge of safety legislation and regulations.

oHighly creative and innovative thinker, with great tenacity in problem solving and patience in training others.

oProblem solving skills.

oStrong time management skills - able to work under pressure to deadlines.

oHazardous Area installation and inspection experience is an advantage.

oThe ability to identify and focus on key issues and figures and to operate cross functionally.

oEffective time management skills with ability to prioritize workload.

oWell rounded interpersonal skills, experience and understanding of how to deal courteously and effectively with senior officials in a variety of environments.

CAPABILITIES AND EXPERIENCE:

oSupervision and implementation in the activities of reactivation / refurbishment (shut-down work-100% or partially running process), installations, operations, inspection, monitoring the fabrications, all types of maintenance, testing, pre-commissioning, commissioning, start-up and performance test of all electrical, instrumentation and communication system of offshore/onshore oil & gas installations in planned, safe and logical manner as per contractual standard, specification and clients requirements that meet work requirement on priorities and deadlines .

oIN OIL & GAS RIG REACTIVATION /REFURBISHMENT/ SHUT-DOWN MAINTENANCE PROJECT,, responsible for all ‘E&I’system of their assigned projects. Plan, schedule, predict, and manage all the electrical tasks of assigned project to assure accuracy, proper resources, and quality from start to finish.

-Preparing, scheduling, coordinating and monitoring the assigned engineering projects

-Monitoring compliance to applicable codes, practices, QA/QC policies, performance standards and specifications

-Interacting daily with the clients to interpret their needs and requirements and representing them in the field.

-Advanced MS Office skills

-Familiarity with rules, regulations, best practices and performance standards

-Ability to work with multiple discipline projects

-Project management and supervision skills

-Decision making ability and leadership skills

-Time management and organization skills.

oPRE-COMMISSIONING: Supervise all the pre-commissioning activities of electrical and instrumentation system of oil & gas installations and associated works to enable the facilities to be made ready for commissioning of all checking, verification of testing of construction work (Both static and functional).

oCOMMISSIONING: After pre-commissioning supervise all the operational testing under real or simulated conditions of systems and equipment in preparation for start-up.

oSTART-UP: Carrying out start-up checks, energizing and running of equipment in normal operation made and carrying out post start-up checks and monitoring.

oPERFORMANCE TEST: after start-up and with stabilized condition, continuously running the equipment and process for a period of 72 hours without shut down. Monitoring the equipment and process and reading taken to evaluate the performance up on the specifications for the system, part system or equipment until the specification requirement is achieved.

oEnsure that all construction checks are witnessed and complete.

oCoordinate with the (sub) contractors and facilitate vendors on commissioning activities.

oFormulate, implement and monitor ‘QA’ standard and procedure to achieve project quality excellence in work.

oPerforming design calculations, preparing specifications and conducting technical bid analysis for electrical equipment.

oTroubleshooting and failure analysis coupled with a diversity of background as electrical engineer.

ACHIEVEMENTS.

oMaximized production by minimized cost, time, materials and manpower for shutdown maintenance of refinery by implementation of simple logic by using of few changeover switches for many DG sets.

oReduced plant downtime and spare parts consumption by revising E & I maintenance procedure.

oCompleted on schedule the on-site testing and construction of Off-Shore Oil production platforms.

oCompleted on time and within budget numerous engineering design and construction package.

oObtained unified and advantageous pricing throughout Europe and Asia for E & I equipment for oil/gas companies.

EXPERIENCE IN SPECIFIC OFFSHORE/ON-SHORE OIL & GAS PROJECTS:

Presently serving as an ‘Inspection Engineer’ (Electrical equipment) for ‘3rd Party Inspection Company ‘SGS’ India Pvt. Ltd., & ‘ERAM INTERNATIONAL’ (Client: Backer Hughes Middle East) Coimbatore in India) where witnessing, ‘FAT’ & ‘SAT’ on Transformers, ‘PCC’, MCC’,’motor starter panels, various types of cables and many more electrical equipment and control valves…on daily rate basis.

EMPLOYER GTC Oil Field Services Limited, Gujarat, India.

NAME AND TYPE OF RIG TG500E, Land Rig

PERIOD Mar.2022 to Dec. 2022

POSITION HELD Chief Rig Electrician

INDUSTRY SECTOR Oil & Gas Drilling – Onshore.

NATURE OF DUTY Supervise Rig Electricians and carry out periodic maintenance according to the PMS guidelines and coordinate same with maintenance supervisor and other section heads.

oEnsure daily, monthly & yearly inspections and maintenance on electrical equipment (temperature, loose connections, protection type, area classification, and etc..) are carried out. Check and record ‘IR’ value, winding resistance, earth resistance value, continuity tests on cables, generators, motors and transformers on the rigs.

1.EMPLOYER ARABIAN DRILLING COMPANY, Dhahran, Saudi Arabia.

NAME & TYPE OF RIG ADC 32 & ADC 36 – Land Rig

oPERIOD Feb.2014 to Dec.2014

oPOSITION HELD Chief Rig Electrician.

oINDUSTRY SECTOR Oil & Gas Drilling-Onshore.

oNATURE OF DUTY Supervise & train Rig Electricians / Assistants and carry out periodic maintenance according to the PMS guidelines and coordinate same with maintenance supervisor and other section heads.

oEnsure that the permit to work system is in place and followed.

oMaintain an adequate supply of spares in order to fulfill maintained requirements and facilitate a safe and efficient operation – generate requisitions as required.

oInform Supervisor and other department heads of any technical problems or limitations that may affect the safe operation of the rig.

oMaintenance and repair general rig equipment such as HVAC system, refrigeration plants, power and communication systems, lighting, etc…

oCarry out maintenance and repair on electrical components of drilling equipment, ie.Driller’s console, drilling motors and auxiliaries, Top drive system, draw works, mud pumps, etc…

2.EMPLOYER SHELF DRILLING Inc.,Dubai Dry dock, Dubai, UAE. Secondment from ‘OGRE’ (Oil & Gas Resources Engineers) Singapore.

oNAME & TYPE OF RIG Jack-Up Rig ‘HIGH ISLAND V’

oPERIOD Sept.2013 – Oct.2013

oPOSITION HELD Chief Rig Electrician.

oINDUSTRY SECTOR Oil Gas drilling-Offshore

oNATURE OF DUTY

oSupervise & train Rig Electricians / Assistants and carry out periodic maintenance according to the PMS guidelines and coordinate same with maintenance supervisor and other section heads.

oPrepare punch list for replacing faulty cables, electrical fittings, cable trays, cabin to cabin cable entries fill with fire rated compounds, light fittings of the rig, faulty items in the electric room, DG sets and more….

oRecord the ‘IR’ value, winding resistance, continuity test and etc…of the motors & transformers.

oEnsure the electrical and instrumentation system of the rig functioning healthy condition.

oCarried out periodic maintenance according to the PMS guidelines and coordinate same with maintenance supervisor and other section heads.

3.EMPLOYER SHIV-VANI OIL AND GAS EXPLORATION SERVICES LTD., Gulf of Suez, Egypt-Offshore

NAME & TYPE OF RIG OCEAN HERITAGE’ Jack-Up rig

oPERIOD Jan.2013 to June 2013.

oPOSITION HELD Chief Rig Electrician.

oINDUSTRY SECTOR Oil & Gas drilling-Offshore.

oNATURE OF DUTY Carried out minor refurbishment and commissioning work then operation repair and maintenance jobs of all electrical and instrumentation system of the rig.

oSupervise & train Rig Electricians / Assistants and carry out periodic maintenance according to the PMS guidelines and coordinate same with maintenance supervisor and other section heads.

4.EMPLOYER TRANSOCEAN OFFSHORE DRILLING INC., BRAZIL (Transocean and ‘Global Santa Fe’ merge to become the world’s largest offshore driller).

oNAME & TYPE OF RIG Drillship ‘DEEPWATER DISCOVERY’,Type:DPS 3.

oPERIOD Feb.2009 to Dec.2011.

oPOSITION HELD Electro Technical Officer.

oINDUSTRY SECTOR Oil & Gas drilling-Offshore.

oNATURE OF DUTY Served in The vessel name ‘DEEPWATER DISCOVERY’ (5th Generation Drillship) is a Samsung / Reading and Bates designed ‘DYNAMICALLY POSITIONED-3’ (DPS3) 5th Generation drillship capable of drilling in water depths up to 10,000 ft. (Max Drill Depth: 30,000 ft) using 18 ” 15,000 psi BOP and 21” OD marine drilling riser. Operator: Divon Energy, Station Keeping: Nautronix DP 5003series DP system, Rig Type:5th generation Deepwater, Classification: ABS,

oMain Power: 4 nos. of Wartsila 8L46B diesel electric engine rated at 7.8Mw (10,460 hp ea.); 2 nos. of Wartsila 6L46B (7,845 hp ea.) diesel gensets, Emergency Power: New age International HC-M534-02, Power Distribution: 6 nos. of 11KV Generators feeding 3 nos. of 11KV switchboard, Thrusters: 6 nos. of Aqua master Azimuth type thrusters, 5500KW, Deck Cranes: 3 x 80 Ton Amclyne model 35000 crane & 2 x 44.5 Ton Amclyne model 20000, Draw works: Continental Emsco Electro hoist V5000HP,Derrick:Dreco 210’x95’x75’ capacity2,000,000 lbs; 48-in x 133-in drum with grooving for 2-in wire line, Top Drive: Varco TDS-4S DC, 750 T capacity, with PH-8ipe handler, 50,900 ft-lns max torque,Rotary Table: Continental Emsco 60.5 in diameter modelT-6050Rated for 1000 tons, Mud Pumps: 4 x Continental Emsco FC, 2200,2200HP, hp, 7500psi max, BOP: Cameron type 18 in., 15,000 psi .Crew Facilities: 140Berths

oSupervise: Supervises the Electricians.

oBasic Function: Responsible for the installation, maintenance and repair of all electrical equipment onboard the rig.

oDuties and responsibilities:

Operations/Maintenance:

oEnsure daily inspections and maintenance on electrical equipment is carried out.

oEnsure that the permit to work system is in place and followed.

oCarry out periodic maintenance according to the PMS guidelines and coordinate same with supervisor and other department heads.

oOperate, maintain and repair power generation and distribution equipment, i.e. generators and engine controls, SCRs, switchgears, transformers, etc...

oMaintenance and repair general rig equipment such as HVAC system, refrigeration plants, power and communication systems, lighting, etc…

oCarry out maintenance and repair on electrical components of drilling equipment, ie.Driller’s console, DC drilling motors and auxiliaries, Top drive system, draw works, mud pumps, etc…

oCarry out maintenance and repair on electrical components of marine equipment, i.e. thruster motors and auxiliaries, ballast pumps, control panels, cranes, etc…

oMaintain an adequate supply of spares in order to fulfill maintained requirements and facilitate a safe and efficient operation – generate requisitions as required.

oInform Supervisor and other department heads of any technical problems or limitations that may affect the safe operation of the rig.

oImplement the outstanding recommendations from audits, as issued by Clients, Regulatory Authorities or rig management.

oCommunicate equipment problems or breakdown information via direct supervisor to Field Support Group.

QHSE:

oDemonstrate commitment to company safety policies through leadership and guidance.

oActively participate in weekly safety meetings pre job meetings as required.

oReport any incidents, potential hazards or abnormal situations to the Electrical Supervisor or Maintenance Supervisor/Chief Engineer and other department heads.

oPrepare Job Safety Analysis for hazardous situations.

Personnel:

oMentor, develop and train crew members to ensure they are competent to work at their next job level.

oEnsure that all subordinates have the necessary skills and experience to fulfill their assigned tasks in a safe and efficient manner..

oSupervise and guide crew members in their On the Job Training program.

5.EMPLOYER STATOIL E & P NORWAY (SOUTH PARS GAS PROJECT-IRAN), (Owner: Persian Oil & Gas Company, Company: Statoil, Petro pars Ltd., Contractor: SADRA). (The objective of the project is to develop the offshore and onshore facilities for phases 6, 7 & 8 of south pars gas field located approximately 100 km offshore in Persian gulf) Phases 6, 7 & 8 embrace about 650 billion cubic meters of gas (four billion barrels of oil equivalent) and some 700 million barrels of condensate (light oil). The facilities are designed to produce, treat and transport the reservoir fluids from three development phases of 1000 MMscfd equivalent wellhead fluid each. These three phases consists of three identical wellhead platforms with the distance of 10 km each which will be used to separate associated water from the gas and the wet gas will be transported to shore via three subsea pipe lines (32”Dia.) one dedicated to each platform. The gas is then treated onshore at Assahuyeh refinery.

oNAME & TYPE OF OFFSHORE PLATFORM.: Wellhead Platform Module # 6, 7 & 8.

oPERIOD Feb.2007 to Sept.2007.

oPOSITION HELD E&I Engineer.

oINDUSTRY SECTOR Oil & Gas-Well Head Platform-Offshore.

oNATURE OF DUTY Supervising, monitoring / inspection and witnessing of all E&I activities of pre-commissioning, commissioning, start-up, performance test and departments & involved parties (Commissioning dept., QC/QA dept, Construction disciplines, vendor representative and third party).

oInspect materials and equipment as installed for compliance with contract plans and specifications.

6.EMPLOYER SAIPEM E&P ANGOLA, (TOTAL PROJECT BLK.17) Drillship (Saipem-10000) operating at deep-sea Angola offshore.

oNAME & TYPE OF RIG Drillship ‘SAIPEM 10000’ –Type: ‘DPS 3’.

oPERIOD Feb.2006 to Feb.2007.

oPOSITION HELD Electro Technical Officer.

oINDUSTRY SECTOR Oil & Gas drilling-Offshore

oNATURE OF DUTY……:Managing the maintenance activities in all E&I system on following equipment:“S-10000” is an Ultra deep water drill ship, equipped with Extended Well Testing and made world record of deepest offshore drilling at “Gabon Field” of Congo in the year of 2002. CLASSIFICATION: ABS+A1 (E), “Drilling Unit”, +FPSO, +ACCU, +DPS-3, OMBO, DLA, +CDS. Positioning system: Simrad SDP-32, DP class 3. Dimensions:Length overall:228m, Breadth, moulded : 42m,Depth, moulded: 19m, Operating draft: 12m, Displacement: 96,455t, Variable deck load: 20,000t, Oil storage capacity:140,000 bbl.ICAMS (Integrated, Automated control and monitoring system): The drill ship is designed to function as an integrated unit allowing all systems including propulsion, power management, power generation, fluid flow systems, fluid storage systems and drilling systems to be monitored and controlled via a single integrated monitoring and control network. Operational capabilities: Water depth capability: in excess of 10,000 ft.Drilling depth: 30,000 ft. RKB.Cranes: 4 Hydra lift knuckle boom cranes. Rated capacity 85t at 18.4 m. Power plant & Marine facilities: 6Nos.of 7Mw.Wartsila Nsd Co.18V32LNE. Coupled with ABB HSG900XU10, 8750 Kva, and 11Kv.For a total power generation of 42Mw. 6 Thrusters, each driven by one 4Mw. 3.3Kv, ABB Sami Megastar 5000-D3300pwm.”VFD” Electric motor. Derrick: Bailly Dynamic base 80x60 ft., top 60x20 ft., height 200 ft. Static hook load 2,000,000 lbs. Automatic drill pipe racking system: Hydra lift Vertical column Type capable to handle from 3 ” D.P. to 13 3/8” casing. Draw works: Wirth GH 4500 EG 4,200 HP. Re-generative braking + Baylor 7838 + single disc brake, Powered by 3 General electric GEB 22A1, 1,420 HP. Each. Rotary table: Wirth RTSS 60 ” hydraulic, maximum opening 601 U2”. Rated capacity 907 t., driven by hydraulic motor. Top Drive: Driven by 2 units of 2x850kw. 660volts Motors, Hydra lifts HPS 750 2E, rated Capacity 680 t.BOP stacks: Shaffer 18 ” - 15,000 guideline less with Vetco HD-H4BOP connector. Riser: ABB Vetco Gray 3,000 m w.d. Type HMF 21” o.d.x 90 ft. long. Crew facilities: 160 people.

7.EMPLOYER GULF DRILLING INTL., U.A.E. (PROJECT GULF-3 J RIG 350’) is an offshore drilling Co.; joint venture of Qatar Petroleum and 40% by Japan Drilling Co. operating in Arabian Gulf water.

oNAME & TYPE OF RIG Jack-Up rig ‘GULF-3’

oPERIOD Oct.2005 to Jan.2006.

oPOSITION HELD Chief Electrician.

oINDUSTRY SECTOR Oil & Gas Drilling-Offshore.

oRecord the ‘IR’ valure,winding resistance, continuity test and etc…of the motors & transformers.

oEnsure the electrical and instrumentation system of the rig functioning healthy condition.

oAssisting to Chief Engineer on modification of (‘GULF-3’ jack-up rig,350’) cantilever, living quarters, increasing the capacities of legs and some related modifications in the machinery deck.

oPre-commissioning activities on Electrical Distribution Systems including 480V MCC, Lighting Systems and Distribution Panels DC and UPS Power Systems, Wiring and Troubleshooting abilities, Diesel Generator Start up, Emergency D.G.sets, 480vac and medium voltage 4160vac and above switchgear controls.

8.EMPLOYER GREATER NILE PETROLEUM OPERATING COMPANY-SUDAN an on- shore oil/gas E&P Company with the crude production of 300000BPD.

oNAME & TYPE OF PROJECT Central & Field Production Facilities(CPF&FPF) Maintenance project.

o PERIOD Aug.2004 to Sept.2005.

oPOSITION HELD Sr.E&I Engineer.

oINDUSTRY SECTOR Oil & Gas operating company-Onshore.

oNATURE OF DUTY Assisting to Engineering Supt. and responsible for maintenance of all E&I system in Central & Field Processing Facilities.

oManaging the E&I section, planning, implementation, approval and control of schedule of preventive, shutdown & emergency maintenance and modification work.

oTroubleshoot plant problems, recommend engineering solutions. Provide technical reports to Managements.

oPrepare Operating/Capital budgets and exercise control within close limits.

oPlanned and executed various tie in activities at site in limited plant annual shutdown time.

oComply with company quality, health, safety, security and environmental polices procedures and reporting requirements.

9.EMPLOYER RELIANCE PETROLEUM LTD., INDIA (SULPHER UNIT #4 EXP.PROJECT).India’s largest private sector and world’s largest refinery with the production of 1.24 Million BPD (Source Oil and Gas journal 1/1/ 2006).

oNAME & PROJECT Sulpher Unit #4 shut-down project.

oPERIOD Sept.2003 to Aug.2004.

oPOSITION HELD Sr. Electrical Engineer.

oINDUSTRY SECTOR Oil & Gas Refinery-Onshore.

oNATURE OF DUTY Managing a group of Engineers to carry out all the engineering activities related to electrical construction of new Sulphur Unit # 4 and shut-down maintenance as per schedule when a part of the process in operation.

oAssist the Constr. Manager Elect. on the supervision of installation, inspection/monitoring, testing, commissioning and start-up of both HV & LV electrical system of refinery.

oProvide technical support to construction and commissioning.

oUnderstand the contractual scope of work and raise variation requests for any work not covered as part of the work scope but is required to be undertaken for job completion.

oBe aware of the health, safety and environment (HSE) aspects of work.

oInstruct personnel in good housekeeping and safety practices.

10.EMPLOYER HIGHLAND GROUP OF COs., UAE.(OFFSHORE OILFIELD SERVICES WITHIN ABUDHABI, UAE).

oNAME & PROJECT Maintenance project for ‘ADNOC’ Group of Companies.

oPERIOD Jan.1999 to July 2003)

oPOSITION HELD Proj. Engineer E&I.

oINDUSTRY SECTOR Oil & Gas maintenance for offshore & onshore installations.

oNATURE OF DUTIES Manage the ‘E&I’ Section of some Off-Shore Oil/Gas companies and successfully served to reduce downtime, reduce spare parts consumption and improve plant availabilities by revision of the E&I installation and maintenance procedures, improve training and implementation of a number of effective plant modifications.

oPrincipally to assist the Assistant Project Manager with the following

oSafe and efficient delivery of Projects to both Client and Company satisfaction

oInput to both technical and commercial aspects of the tendering process.

oAssist in technical and operational aspects of the project

oComply with company Quality, Health, Safety, Security and Environmental policies, procedures and reporting requirements.

oAssist with project delivery by ensuring project schedules are updated

oEnsure compliance with project procedures and help prepare work and mobilization plans

oAssist with the management of internal and external third party interfaces

oComply with all business system procedures to ensure accurate and timely reporting of company assets

oAny other project or related activities as delegated by the Project Manager.

11.EMPLOYER SEMBCORP, SINGAPORE (2x600MW TUAS POWER PHASE- I PROJECT).

oPERIOD Sept.1997 to June 1998.

oPROJECT 2x600MW TUAS POWER PHASE- I PROJECT)

oPOSITION HELD M&E’ Engineer.

oINDUSTRY SECTOR Construction – Engineering – Onshore.

oNATURE OF DUTIES Assist the Project Manager on the supervision of installation, inspection / monitoring, pre-commissioning, testing, commissioning and start-up with ‘BAS’ system of ‘ACMV’, SMALL POWER & FIRE PROTECTION system of 2x600MW Tuas Power Phase I proj.

oEnsure technical adequacy of engineering and design consistent with economy, good engineering practice, safety in design and specific requirement of the project.

oEnsure compliance with the project specifications, company/clients standards & codes and local regulations.

12.EMPLOYER AL FURAT PETROLEUM CO., SYRIA (CPF&FPF PLANT MAINTENANCE)(Managed by Royal Dutch Shell Petroleum) operates CPF at different locations in Syria with an Oil production of 600,000 b/d.

oPROJECT Maintenance project of CPF & FPF.

oPERIOD March 1996 to June 1997.

oPOSITION HELD Electrical Supervisor.

oINDUSTRY SECTOR Oil & Gas-CPF/FPF- Onshore

oNATURE OF DUTIES Assist the Section Head (Electrical) on the supervision of installation, periodical and emergency maintenance and minor commissioning work of HT and LT electrical system in the plant.

13.EMPLOYER TOTAL E&P THAILAND. The French Offshore Oil/Gas E&P company (joint venture with PTTI of Thailand, British Gas and State Oil operates a number of offshore gas fields in South China Sea with a natural gas production around 42.6 M.cu.Feet/day.

oPROJECT TOTAL BANKOT FIELD OFFSHORE GAS - PRODUCTION RIG

oPERIOD Mar.’92 to Jan.’96.

oPOSITION HELD Asst. Supt.’E&I’ (Comm.).

oINDUSTRY SECTOR Oil & Gas ‘E&P’.

oNATURE OF DUTIES Monitoring the fabrication, construction, testing and pre-commissioning of ‘E&I’ installation for production and quarter platform at Batam Island, Indonesia. Commissioning, start-up and operations at Thailand Off-Shore The construction and testing were completed on schedule with a minimum of change orders.

oFollow -up of all elect. Commissioning preparation and execution activities of the Natural Gas gathering development project and acting as a representative of company, to ensure that the Operators are covered.

oAssist in the preparation of commissioning, operating and maintenance manuals as required by the project.

oThoroughly understand the contractual scope of work and raise variation request for any work not covered as apart of the work scope but is required to be undertaken for job completion.

oMaintain cordial relations with client, certification agencies, Vendors etc..

oProvide motivation and leadership to staff together with full support to Area Manager.

14.EMPLOYER QATAR GENERAL PETROLEUM CORP., Production of gas 1003MMcfd.

oPROJECT ‘LNG’ PLANT MAINTENANCE.

oPERIOD Sept.1988 to Nov. 1991.

oPOSITION HELD Electrical Engineer.

oINDUSTRY SECTOR Oil & Gas – Onshore.

oNATURE OF DUTIES Managing the activities of maintenance including minor commissioning within the schedule and budget.

oMeasures to be taken in the event of break-down in the mains network and mains monitoring.

oEnsure HSE is given the highest priority, and particularly that personnel are adequately trained to execute work assignments.

15.EMPLOYER KUWAIT NATIONAL PETROLEUM CO., Oil prods. of 1.8 M.b/d& Gas prod. 1452 MMcfd.

oPROJECT KNPC-E&I COMISSIONING.

oPERIOD April 1980 to June1988.

oPOSITION HELD Asst.Supt.Elec.Comm.

oINDUSTRY SECTOR Oil & Gas onshore Commissioning.

oNATURE OF DUTIES Follow-up of all Electrical Commissioning preparation and execution activities of the oil gathering development project.

oManaging a team of Engineers for electrical projects and allot the project commissioning activities.

oReview & approve/endorse contractor’s deliverables.

16.EMPLOYER MADRAS REFINIRIES LTD., INDIA.

oPROJECT REFINERY EXP. PROJECT

oPERIOD Aug.1972 to March 1980.

oPOSITION HELD

Contact this candidate