Albert Ybanez

**** ****** **. **** *** Humble, Tx 77396

ad4ftd@r.postjobfree.com 832-***-****& 713-***-****

CERTIFIED WELDING INSPECTOR 21097021 EXP. 09/24

To give an overview of my skills and experience in the areas of welding inspection. To show the company that I can be an asset to any team and the experience to reinforce such; And show the certification I hold in these areas adding to the capabilities I have in fulfilling my job obligations. I’m Familiar with codes ASME IX, B31.1, B31.3, API 1104, and ASME VIII DIV.1&2.

PROJECTS WORKED

Perdido 2 for shell, Stones for shell, Preakness 2 in Orla Tx. TICO Downtown Houston, Dow Chemical Glycol 2 unit turnaround, Phillips 66 Turnaround Borger Tx. Advario outage Texas City, Energy Transfer outage Beaumont Tx. Intel Eagle Project Phoenix AZ

Authorized to work in the US for any employer.

Work Experience

QA/QC COORDINATOR

CROSS CONSULTING SERVICES

Work for Cross Consulting Services for NEHP on the Intel Eagle Project. Walk down High Purity piping modules in the subfab area inspecting POC sets and EOL dimensions also verify Piping labels and ensure that they were correctly applied. Walk down COR list and verify that they were fixed so that they could be cleared from COR list. Verify Elevations of Drains, High Purity piping, PCWR, and PCWS. Check Hangers, pipe clamps and pipe supports and verify that they were properly installed.

QC III

H+M EPC

Work a outage at Advario Tank Farm Texas City. Create hand sketched Isos from field fabrication and give them to field engineer. Visually inspect welds and update weld log and weld maps. Create Flange map and Flange log for torquing. Verify Torques and update flange log and flange maps. Create hydro packet and witness hydro. Signoff on hydro report and coordinate with client Chief inspector for signoff. Create digital databook for final client review and signoff.

Work outage at Energy Transfer in Beaumont Tx. On nightshift. Coordinate with day shift counter part for rollover. Pt root pass at QC hold points Visually inspect final closure welds and update weld log ab d weld maps Coordinate nightshift NDE for PT root and finals. Verify torques and update flange map and flange log.

QA/QC

Sentinel

October 2023 – October 2023

Work a turnaround in Borger Tx. At Phillips 66 plant.

Review job packets and read scope of work. Walk down Different job packets and verify that mechanical work was done to customers specs. Signoff on completed job packets.

QA/QC Coordinator

Koch Plant Specialties

September 2023 – October 2023

Work a Turnaround at Dow Glycol 2 unit in Plaquemine, LA. Review work packets and walk down Jobs for pre turnaround work. Review and verify that work scope was done to Dow specs and code prior to having Dow QA walk down and signoff.

QA/QC

Tellepsen Industrial

September 2023 – September 2023

Visually inspect welds and check dimensional orientation of elbows and fittings. Witness and verify Hydrostatic testing and signoff on test packet and submit for review.

QA/QC COORDINATOR

Jasper Ventures Inc.

March 2023 – September 2023

Over see all QA/QC aspects of Preakness 2 Cryogenic gas plant, in West Texas, job site including Civil & Mechanical. Coordinate with NDE and keep track of weld x-ray log. Update welder continuity log. Test welders per WPS approved for job site. Create weld closure forms and upload them to sharepoint. Create Torque reports for field torquing crews. Randomly monitor torquing and verify correct equipment is being used. Review and sign off on torque reports completed and have them signed off by clients third party inspector then have them uploaded to sharepoint. Attend morning safety meeting and Daily production meeting. Once a week attend weekly supervisor Safety training Per MPLX policy. Handle and upload all documentation related to QA/QC responsibilities. Verify concrete forms and footers and piers are in correct location on prints and core lines. Verify elevations and rebar are correct size and tied correctly according to the prints. Verify Equipment placement Like coolers and vessels and Prefab modules. Walk down modules with P&IDs to verify all piping is in correct place. Review hydro reports for pipe spools received from shop. Verify pre insulation check prior to allowing insulation to commence. Job to be built to ASME IX and B31.3. Verify fitups and monitor welding activities, parameters, and consumables.

Quality Control Inspector

Spitzer Industries HFD

Dec.2022 – Feb.2023

Create weld maps and as-built drawings for traceability for fabrication of subsea manifolds. Coordinate with third party inspectors for fitups and sign off on job travlers. Verify bevels and part numbers and heat numbers are same as the job travlers.

Perform daily weld audits one per job on the floor and upload to job folder.

Quality Control Technician

Titan Production Equipment

Oct.2022 – Dec.2022

Inspect pipe fit ups and welds and assure they were within tolerances. Inspect long seam welds and pt beveled ends to assure no indications were left. Check dimensions on rolled plate to make sure out of roundness was within tolerances of ASME section XIII for pressure vessels. Check layouts on pipe profiler when new program was implemented and sign off on it. Inspect shell to shell fitups and make sure orientation of long seams and nozzels and manways were correct prior to signing off. Visually inspect internal fitups and welds and make sure it was built to specification and prints. Perform weld audits to assure correct procedures were implemented. Inspect head to shell fitups and sign off. Prior to saddle fitups perform prefinal inspection by checking all 2-hole orientations on nozzles and manways. Verify recorded heat numbers for shells, heads, nozzels, and olets are correct with Mtrs in data book. Assign National Board number and make pressure vessels name plates. Review data books for pressure vessels and verify all NDE has been completed prior to releasing to hydro testing. Witness hydro testing and signoff when done.

Quality control inspector leadman

Universal steel America

Aug.2022 – Sept.2022

Inspect long Seam welds and girth seam welds. Review MTRs and job packets for release to production. Verify fit up of long seams orientation and sign-off on fitups. Input data into computer systems so AI could Review job packets before shipping. Coordinate with nde to make sure all files and films are with the correct job packets.

Combo Welder

Mrc Global – Laporte, Tx

Oct. 2019 – Aug. 2022

Cut pipe pups to length using a plasma cutter or acetylene torch. Prep grove valves or perar Valves for fit up. Fit pipe pups to valve. Weld pipe pups to valve using GMAW and SAW welding process. All welds are made 100% xray quality welds.

Outsource – Houston, Tx Welder

April 2019 to October 2019

Fit and weld pipe for a refrigeration system at Bimbo bakery. All welds were welded using SMAW process.

Welder

Pipeline Technique – Houston, Tx

October 2018 to April 2019

Fit and weld sand seperators. Pre heat material to 400 degrees before welding with tig and subarc.

Combo Welder

Proserv Operations, Inc - Houston, TX

March 2018 to October 2018

Weld pipes for compressors with GTAW process 100% xray quality welds. Also assist fitters by tacking pipes together.

Welder

Pipeline Technique - Houston, TX

August 2017 to March 2018

Weld 100% Ut quality welds on AR Subsea Pullheads for Appomattox project. Using FCAW process. Welded choke and kill lines with gtaw and Smaw

Combo Welder

S&B Modular Operations - Houston, TX

March 2017 to December 2017

Weld pipe 100% xray quality welds with tig mig fluxcore and subarc. Welded alot of olets socketlet and theadedlets with tig.

Combo Welder

Turner Industries - Pasadena, TX

March 2017 to July 2017

Weld pipe 100% xray quality welds with tig mig fluxcore and subarc. Weld out olets socketlet threadedlets with tig.

Combo Pipe Welder

Chicago Bridge & Iron Company - Beaumont, TX

February 2016 to March 2016

Weld tig and flux core on high pressure pipe all 100% X-ray quality welds. Also weld stainless steel pressure vessels with gtaw process.

Welder/Fitter

Piping Technology & Products - Houston, TX

December 2015 to January 2016

Fit and weld pipe expansion joints using various welding processes.

Combo Pipe Welder Pipe Welder

Proserv - Houston, TX

September 2015 to October 2015

Responsibilities

Weld pipe support's for compression skids and. stainless steel pipe on compression skids.

PIPE WELDER

ACUTE TECHNOGICAL SERVICES

May 2014 to July 2015

Weld PQR's for Shell Perdido 2 drilling risers using AMI robotic welder using GTAW process and fill and cap with SAW process. Use weld data logger to data log welds during production as well as during PQR process. Move drilling risers with overhead crane from one end of the shop to the other end of shop. Assist in other miscellaneous shop functions.

PIPE WELDER

AF GLOBAL

July 2011 to April 2014

Weld choke and kill lines with GMAW and SAW. Weld on drilling risers. Assist in the installation of buoyance devices. Assist in other miscellaneous job functions.

WELDER

NATIONAL OILWELL VARCO PCG

February 2010 to May 2011

Fitted up and welded SAW on tension rings and lift flanges. Welded pistons, single housings and double housing Blow out preventers. Welded down tension rings to positioner with SMAW 10018 D2 and lift flanges. Also welded diverter housings.

CERTIFIED WELDING INSPECTOR

21097021EXP. 09/24

SAN JACINTO COMMUNITY COLLEGE - Pasadena, TX

August 2015

General Education Diploma

NORTH HARRIS COMMUNITY COLLEGE - Houston, TX 2001

SKILLS & ABILITIES

I can weld GTAW, SAW, SMAW, GMAW, and FCAW. I can weld in 1G, 2G, 3G, 4G, and 6G positions. I also have experience fitting pipe and structural parts. I have experience in overhead crane operations and forklift operations. I have experience in all facets of shop operations. I am proficient in blue print reading and doing layouts.

Contact this candidate