SCOTT PETERSON

Coating / Welding / General Inspector

** ********* *******

Leduc AB T9E0K9

780-***-****

ad408l@r.postjobfree.com

Career Profile

Seasoned Inspections Management Professional, extending 20+ years of experience in leading the QA/QC management, non-destructive testing, and documentation of welding and inspection services in construction, fabrication, and maintenance within the oil and natural gas facility, mainline, and pipeline integrity projects. Deliver proficiency welding and metal fabrication, welding methodologies, processes, and codes. Effective in developing relationships and communicating on all levels from management, trades, and third-party contractors. Dedicated to the development and implementation of quality improvement processes and maintaining a safe working environment.

- Inspections (Welding, NDE, etc.) - Project Planning & Management - Pipeline & Facility Construction

- Plant Inspection Programs - Failure Investigation - Risk Management

- Pipeline Integrity - Codes, Standards, & Interpretation - Quality Control & Quality Assurance

- Project Cost Tracking - Team Leadership - Coaching and Mentoring

Professional Experience

SENIOR COATING INSPECTOR 2020 to 2023

Trans Mountain Expansion Project, Spread 2

- Oversaw the daily coating inspection services across Spread 2 as well as the safety inspection of the crews.

- Reviewed the coating inspectors’ and contractors’ daily reports.

- Held responsible for equipment verification, coating, and holiday testing.

COATING/GENERAL INSPECTOR 2017 to 2019

TC Energy, Alberta/Saskatchewan/Ontario

- Projects:

- Tweedie / Hylo Lateral Reconnects (2019) - Albersun Lateral Check Valve Replacement (2019)

- Jumping Pond Lateral Tie-in Side Valve (2019) - Summer ML Cap Dig Program SK (2019)

- Summer ML Exp Dig Program SK (2019) - Central ML Dig Program MLV 15-41 (2019)

- MLV 41-14-2 EMAT ILI Immediate Dig (2019) - Station 17-4 Launcher Install (2018)

- MLV 17-4 Suction Valve Replacement (2018) - Station 25 Power Gas Rebuild (2018)

- Station 17 Receiver Assembly Re-Installation (2018) - Central ML Dig Program (2018)

- Bundle 6 Winter Dig Program (2018) - Crocodile Creek Line Lowering/Replacement (2017)

- ML NONT Summer Dig Program (2017)

QA/QC COATING AND WELDING INSPECTOR 2011 to 2017

Worley Parsons Cord, Edmonton, Alberta

- Projects:

o Coating Inspector on multiple projects including TC Energy, Husky, MEG Energy, and Enbridge.

o Structural Inspector at the module yards as well as various shops around Edmonton.

o Pipe Inspector at the module yards.

- Ensured document control, quality assurance / quality control on all projects.

- Performed audits on sub-contractor turnovers and work procedures for various projects.

- Performed coating inspections at various shops around Edmonton and Nisku.

JOURNEYMAN WELDER/QUALITY CONTROL 2000 to 2011

Various Contracts, Throughout Alberta

- Clients: Aspen Custom Trailers, Makloc Buildings, Whitemud Ironworks, and Micoda Processing Systems.

Education

RED SEAL JOURNEYMAN WELDER CERTIFICATION

Holland College Institute of Technology, PEI

HIGH SCHOOL DIPLOMA

Chalottetown Rural High School, Charlottetown, PEI

Professional Development

Drone Pilot Licence Ongoing

Project Management Ongoing

API 1169 Pipeline Construction Inspector 2018

Armor Plate Pipe Wrap Installation Certification 2018

Visual Weld Inspection Course TransCanada Field Applications 2017

Non-Destructive Examination Inspection Requirements 2017

NACE Coating Inspector, Level 2 2015

NACE Coating Inspector, Level 1 2012

CWB Welding Inspection, Level 2 with W 47.1 and W59, and B31.3 2012

Training and Certification

- Emergency Management Program Overview Level 1 - Ground Disturbance Level 1

- Responding to Conflict Complaints of Harassment & Violence - Trench Box Safety Training

- Transportation of Dangerous Goods Certificate - Drug and Alcohol Awareness

- Ground Disturbance Awareness Level 2 - Confined Space

- Code of Business Conduct and Ethics - First Aid / CPR

- Harassment and Violence Prevention - H2S Alive

- Cyber Security Fundamentals - WHMIS

- TMEP Project Management Team Health and Safety Orientation - TMEP Construction Safety Orientation

- TMEP Quality Assurance Program (QAP) Training - TMEP Level 2 Environmental Education

- TMEP Workplace Violence Prevention Program - TMEP Life Saving Rules Program

- TMEP Green Defensive Driving Certification - TMEP Office Safety

- TMEP Material Handling and Safe Lifting - TMEP Safe Driving

Codes and Specifications

- Pipeline Environmental Protection Plan NEB Condition 72 (TMEP) - ASTM D7393 Indicating Oil in Abrasives

- SSPC-PA2: Paint Application Standard No. 2 Procedure for - CWB W59 Welded Steel Construction

Conformance to Dry Coating Thickness Requirements - ISO 218**-***** Field joint Coatings

- CSA W47.1 Fusion Welding of Steel Company Certification - ASTM D2240 Durometer Hardness

- ASTM D4285 Indicating Oil or Water in Compressed Air - ASTM-D4417-14 Surface Profile of Blast Cleaned

- CSA Z245.30-18 Field applied external coatings for Steel

Key Areas of Expertise

QA/QC MANAGEMENT

- Lead quality control and assurance activities in accordance with standards and regulations.

- Perform internal and external audits on behalf of the companies’ operational management team.

- Manage any deviation from customer specifications or drawings and RFI process is followed and documented.

- Applied QA knowledge and expertise to assess alternatives and the impact of design and construction decisions.

- Continuous inputs to the development and revision of quality programs as per ISO quality assurance guidelines.

- Identify areas of inadequacy within the quality system and implement processes to eliminate deficiencies.

- Ensure that third-party testing is witnessed and in conformance with specifications as outlined in the ITP.

- Perform failure analyses to determine the root cause of failure and determine the appropriate resolution.

- Develop new processes, statistical analysis, quality concepts, and system standards.

- Attend client quality control meetings, prepare project quality control system documentation, and coordinate all project requirements.

- Review quality inspection qualifications and training requirements.

- Control and coordinate all quality-related queries with operations and stakeholders.

- Identify risks by checking the manufacturer’s guidelines, long term hazards, and tracking rules and regulations.

INSPECTION / REGULATORY / COMPLIANCE

- Demonstrated ability to conduct inspection on structural steel, and pipeline coating processes and outline recommendations for materials and processes to ensure project integrity.

- Complete detailed reports for audits, non-conformance, and construction surveillance reports supporting inspection results identifying any issues on the project.

- Inspect above and below-ground pipe coatings to ensure compliance with NACE specifications.

- Conduct visual inspections & quality control duties related to major projects.

- Observe/report the technical aspects of a coating project and conformance or deviation from project specifications.

- Keep a log of all issues (safety, quality, compliance, etc.) that are submitted on each project through verbal communication, inspection forms, reports, etc.

- Responsible for allocating inspection resources to the daily tasks being performed on the job and notifying the company of any resource deficiencies.

- Responsible for distributing all inspection report changes, company updates, design drawings revisions, and copies of project-related permits for all inspectors.

OILFIELD GENERAL KNOWLEDGEBASE

- In-depth knowledge of construction processes, methodologies, materials, labour integration, and quality control.

- Expertise in various instruction and quality roles from maintenance to commissioning and startup.

- Extensive knowledge of welding codes and processes used in all facets of the industry.

- Coatings application including airless spray, conventional spray, and brush and roll application

- Knowledge and understanding of pipeline tasks such as stringing, bending, front end, prepping, and jeeping.

- Abrasive blasting and coating on all different types of steel and concrete structures including large diameter pipe.

- Skilled in the calibration, operation, and maintenance of a wide variety of inspection equipment.

- Excellent technical and mechanical aptitudes including strong analytical and troubleshooting abilities.

- Interpret and explain policies, procedures, and technical information to inspectors and other trade professionals.

- Provide expertise for the resolution of concerns that may arise during inspections.

SCOPE OF INFLUENCE

- Demonstrated experience in building effective collaborative relationships with internal / external stakeholders.

- Coach inspectors to maintain the highest levels of competency and performance.

- Provide leadership and guidance to inspectors including managing daily meetings.

- Maintain professional business relationships with vendors and partners.

- Develop great rapport with co-workers during and after projects.

PROJECT MANAGEMENT / OPERATIONS MANAGEMENT

- Supervise inspection operations and other related activities, ensuring operations are carried out efficiently and complying with company operating procedures and safety policy.

- Understanding of pipeline operations, maintenance procedures, and emergency response and regulations.

- Track record of leveraging resources to meet the scope of work logistics and achieve company objectives.

- Proven ability to operate both on strategic and tactical levels within an organization.

- Participate in project kick-off meetings with clients and sub-contractors to provide expertise and recommendations for inspection strategies.

- Ensure that supervisors, foremen, and trades are accountable for quality program implementation and compliance.

- Conduct regular site tours and report all integrity concerns to the head office for speedy closeout.

PEOPLE MANAGEMENT / TRAINING / SUPERVISION / MENTORSHIP

- Leadership and supervisory roles and mentoring of junior personnel to promote skill growth and advancement.

- Training new hires on how to coat and general safety on the pipeline and around heavy equipment.

- Validate personnel’s competencies in their particular line of work.

- Coach, mentor, and provide information to people to maintain the highest levels of expertise and performance.

- Ability to motivate personnel and develop rapport with diverse individuals at all levels.

- Define clear roles & responsibilities and deliverable requirements to inspectors in terms of both scope and schedule.

- Supervise and lead by example by setting the standards for safety, quality, and demeanor highlighting the importance of earning the respect of the team.

COST CONTROL / ESTIMATIONS / TRACKING & REPORTING

- Good ability to manage costs associated with inspection budgets and projects.

- Update and maintain cost expenditures to ensure cost-efficient inspections.

- Ensure inspection costs are within budget and services are properly provided.

- Continuously look for ways to reduce costs and improve performance.

ENVIRONMENTAL / SAFETY AND RISK MANAGEMENT (OH&S)

- Good understanding of OH&S regulations pertaining to the oil and gas industry.

- Strong commitment to safe work practices on the job site.

- Promote and maintain a safe environment for all personnel.

- Follow and implement safe operating practices and ensure compliance with environmental, safety, and regulatory requirements.

- Provide leadership of all inspection activities to ensure the safety and quality of all projects.

TECHNOLOGICAL COMPETENCY / PROGRAMS

- Knowledgeable in computer operations, Proficient in MS Word and MS Excel, Internet research, and communication.

- Prepare and maintain accurate documentation such as meeting reports, incident reports, as well as any other items as required by the company.

- Willingness to continue training to expand technical knowledge and experience in the industry.

EQUIPMENT OPERATIONS / MANAGEMENT

- Proven record of successfully managing inspection crews and equipment at the same time.

- Inspect and confirm that the job site is equipped with all necessary tools, equipment, and supplies.

- Understand the importance of maintaining and managing equipment.

Contact this candidate