Shawn Brown

Roanoke,VA

Call and Text 503-***-****

Work Experience

Travel Welder

Welder/Fitter/Fabricator

Johnson Controls Federal Navy Systems

York, PA

October 2020 to Present

Qualified in Flux core in the 2g 3g 4g on Carbon plate and Horizontal 6" carbon pipe.

Qualified in Tig -Carbon 2"pipe in a 6g restricted enclosure.

Qualified in SMAW-on carbon plate in the 2g,3g and 4g. Also held 6g unlimited on carbon pipe. Dailey work consisted of fit up of pressure vessels in line with STD 248 put in place by DOD. I specifically worked on 520 ton industrial chiller, that when finished would find itself in the front and rear of A Columbia class submarine

Welder/Fabricator

Aerotek Contractor - Portland, OR

July 2018 to July 2020

Welder fabricator for Major Barge and Railcar producer. Duties were Jig and custom fabrication of sub weldments.

Structural Fitter/Combination Welder

Canatal Structural Steel - Cloverdale, VA January 2016 to May 2018

Job included, but not limited to, welding simple to complex structural steel components. These components consisted of carbon plate, I-beams, channel and carbon pipe.

Welding processes that I held certifications in were

SMAW- 6G position, M. carbon pipe, E 6010-E 7018

Flux core -2G, 3G, 4G positions M .carbon plate

MIG-Spray Transfer 1G, 2G positions. M. carbon plate.

Welding Tech

USA Elmira Heights - Elmira, NY

January 2011 to December 2015

Job duties included welding and fitting stainless steel sub assemblies within the parameters of blueprint specifications.

My area's speciality was doing full assembly of AMTRAK passenger railcars. We performed final stage welding, company measurement standards, and final inspections by AMTRAK engineers and outside inspection firm. Conducted end stage repairs.

As a welder I held multiple certifications under AWS.

PESCO BEAM Fitter/Welder Roanoke,VA

January 2007 to January 2011

Structural and Pipe welder of skid mounted.Ethanol.refining.stations.Anti- freeze and oil recovery exchangers. Held certifications Dual shield Fluxcore 2g thru 4g for Structural Dept 6010 and 7018 6g and Tig carbon and stainless 6g.Piping dept.

Education

High school diploma

Skills

Mig-hard wire.short circuit, pulse spray,spray transfer.Fluxcore-dual shield,SMAW 601*-****-****. 308 309L (10+ years)

Forklift (10+ years)

Crane (10+ years)

Welding (10+ years)

Assembly (10+ years)

Blueprint Reading (5 years)

3G (10+ years)

Fabrication (10+ years)

Mechanical Knowledge (10+ years)

Millwright

Conveyor Installation

Warehouse Experience

Basic Math (10+ years)

Heavy Equipment Operation (2 years)

Plasma cutting (10+ years)

English (10+ years)

MIG welding (10+ years)

ASME codes & standards (10+ years)

Hydraulics

Equipment Repair (7 years)

Manufacturing (7 years)

Quality Assurance (10+ years)

Mechanic Experience

Certifications and Licenses

Welding Certification.fluxcore 2g 3g 4g carbon plate and carbon pipe sch 40 with a chill ring-welded in the horizontal position Tig - sch 80 carbon pipe Open root in the 6g-R SMAW 2g 3g 4g carbon plates and Carbon pipe sch 80 monster coupon. All of these certifications were held to NAVSEA/ MIL-STD 248. For use of building 520T industrial chiller/pressure vessel for comfort and weapon systems cooling unit for Columbia Class Submarine

Work Experience

Welder/Fitter

Canatal Steel USA - Hollins, VA February 2016 to March 2018

Structural steel fitter/and fully certified MIG/SMAW welder

Welder/Combination

Welder/ Car Shell CAF, USA

●Weld tech duties include building passenger railcars to specific design from AMTRAK prints

●Placement of parts in jigs and fixtures to blueprint specs to build sub weldments

●Certified to D 1.1 and D 1.6 in position 2G thru 4 G using MIG welding techniques .Certified TIG welder. qualified Stainless to Stainless, Stainless to Carbon and Carbon plate.. Rangin

●Head of safety for my department .Certified first aid, AED, CPR thru National Safety Council

Welder/ General Certified Welder General Electric Rail

●Duties included freight car repair as a general welder

●Certified welder held special certifications in MIG and SMAW to do repairs on wrecked tanker cars

●Welds had to meet crucial criteria

●Thru testing i proved that i had the ability to pass all radiograph and ultrasound testing

●qualified on carbon to carbon plate. stainless to carbon plate 2g-2f thru 4f-4g.Held special qualification to weld pipe schedule 40 2.50" unlimited in the 6G position

Welder/Mechanical/Operator, Dalrymple and Chemung Contracting

Structural and Pipe welds made in industrial setting and pre-fab in shop setting

●Utilize all equipment from bandsaws, ironworker, oxy-acety torches, plasma cutter

●Overhead cranes and jib cranes

●Welding methods used: MIG - short circuit and flux core. SMAW 6010 and 7018

●Operator duties included running heavy machinery from Articulating heavy haulers, off road heavy haulers, multiple kinds of skid steers, heavy lifting lulls and variety of forklifts

●Crane signal and rigging certified. Current forklift license holder

●American Red Cross. First aid, AED, CPR certified

●M, S.H.A Mining Papers are current

Welder/Certified Pipe Welder/Mechanical Worker, Industrial Downtime Solutions

●Performed all phases of industrial maintenance

●Weld carbon pipe ranging from 2"-24"

●Structural field welds performed in the flat, horizontal, vertical and overhead positions utilizing

My skill as a certified SMAW-I was qualified and used the following electrodes, 5P+, 6010, 7018, 8018, 7024

●The use of skylifts, manlifts, and heavy lifting forklifts was part of a daily operation to get the job done

Welder/Pipe and Structural Gillmann Services

●Weld in the production of ethanol, biodiesel refining platforms, waste oil and antifreeze recovery systems

●Welded pipe ranging from 2" to 12" using SMAW 6010 and 7018 and MIG Hard wire and flux core

●Performed multiple phases of construction as a mechanical worker, primary duties were pipe welder/ fitter, structural welder/iron worker.

●Rigging, flagging and setting steel were also part of my daily job description.

Tunnel Miner Johnson Western Gunite

●Foreman of rock bolting and grouting operations

●Duties included scaling loose rock from open drill sites overhead. Insure proper placement and torquing of rock bolts in series to prevent collapse of tunnel, specific grouting techniques used to secure bolts as gunite operations took place to replace the liner of tunnel.

●Working as a team to ensure top notch work habits and following safety guidelines, Was the most important aspect of this job to insure everyone remained safe and returned home to their families.

●As A operator responsibilities included the operation of of Heavy Lifting Lulls, skid steers and backhoes.railroad track mobiles.railcars, IR and Tamrock orbital rock drills.

Irrigation Foreman M&M Grounds & Irrigation

●Maintain inventory list, log work hours

●Ensure residential and commercial projects are finished in a professional and timely fashion

●Shop welder. Maintain all excavation equipment.

●Operation of trenchers, vibrator plows and skid steers on daily basis as part of job description

Welder O'Neal Steel Weldment Division

●Production welder for crane, coal mining and rock drilling manufacturer.

●Methods of welding applied: MIG short circuit 75/25. Spray transfer 92/8

●Fluxcore ranging from 0.45 to 1/16 with a variety of gases. SMAW 7018 repair

●Pre employment weld testing placed me as a Class A welder with the abilities to effectively and proficiently weld all products up to AWS and company standards

Education

Diploma in Botetourt County

James River High School 1996

Skills

Fabrication, Welder Fabricator, Welding, MIG

Contact this candidate