James T. Jinright

** ***** ****** ***.

Clearwater, FL. 33755

Cell: 727-***-****

ad3qsx@r.postjobfree.com

Dear Sir or Madam,

I am seeking a 1

st

shift position in the Tampa Bay Area that will provide me with the opportunity to utilize and expand on my proven talents and abilities, in the field of electronics. I have 43 years soldering experience including surface mount and 33 years job experience. I also have an IPC’s J-STD-001 certification.

Out of necessity, I have become very efficient at re-working electronic components for use in varying selections of equipment when the need arose in order to complete a job. I pride myself on my organizational skills, and believe I posses the necessary drive required in today’s work force to get the job done, as well as an excellent work and attendance record. I respectfully request an interview at your earliest convenience, and will be looking forward to hearing from you in the near future.

Sincerely,

James T. Jinright

JAMES JINRIGHT

20 South Duncan Ave.

Clearwater, FL. 33755

Cell 727-***-****

ad3qsx@r.postjobfree.com

EXPERIENCE

ASSEMBLER CUSTOM MANUFACTURING & ENGINEERING (CME) Pinellas Park Florida. February 21

st

2022

nd

to April 8

2023.

Responsible for assembling wire harnesses and circuit boards. Worked under the microscope. ASSEMBLER AEROTEK/CONMED

Largo Florida. June 21

st

-October 8

th

2021

Responsible for building “Grabbers” (mechanical device), soldering cables onto remote controls, winding motor coils and soldering/installing cables in the “shavers”. ASSEMBLER LIGHT SOURCE & VIDEO REPAIR, INC.

Tarpon Springs, Florida. March 2

nd

-September 23

rd

2020.

Responsible for striping/skinning, soldering/wiring to circuit boards, crimping, casing and potting of cables for medical cameras.

TECHNICIAN INSIGHT GLOBLE/NIELSEN RATINGS

Oldsmar, Florida. August 23

rd

2018-October 29

th

2019.

Responsible for testing and refurbishing power strips, switch boxes, tuners and code readers. ASSEMBLER/TECHNICIAN ANTIQUE AUTOMOBILE RADIO, INC. Palm Harbor, FL. October 10

th

2016-June 13

th

2017.

Responsible for soldering of sub-assembly of car stereos such as wiring of stereo boards, blackboards (front panel board), volume controls, and balance controls. Also soldered and tested and rework surface mount/through-hole boards for “vibrators” (corrects voltage and ground polarity for stereo) and cased. Also soldered and tested and rework surface mount/through-hole boards of PGPI's (positive ground power inverters) and NGPB's (negative ground power boosters), potted and cased. Additionally performed janitor duties. ASSEMBLER/TECHNICIAN AXEO MEDICAL TECHNOLOGIES, LLC Holiday, Florida. June 13

th

2016 to October 10

th

2016.

Responsible for assembly of medical monitor Axeo 3100. Assembled chassis, built and install P.C. boards, wire harnesses, rework boards and wire harnesses, final assembly and test and calibration. Also did repairs, incoming inspection, helping with shipping & receiving and did stock and cleaning/maintenance.

ASSEMBLER/TECHNICIAN PACE TECH

Clearwater, Florida. July 7

th

2011-June 10

th

2016.

Responsible for assembly of the Vital Max 4000 and other medical monitors. Assembled chassis, built and install P.C. boards, wire harnesses, rework boards and wire harnesses, final assembly and test and calibration. Also did repairs, incoming inspection, helping with shipping & receiving and did stock and cleaning/maintenance.

BOAT BOTTOM CLEANER SELF EMPLOYED

Clearwater, Florida. August 2010 to present.

Trying to build business removing barnacles and other growth from boat’s haul using Scuba gear. Also replace zincs.

ASSEMBLER ALC TECHNICAL/GOOD RICH (Temp. position). Oldsmar, Florida. May 26

th

2010-July 21

st

2010.

Responsible for assembly of airplane lights. Lots of mechanical assembly and labeling, priming, cementing, moisture barrier sealant. Use of measuring device to insure level instillation of light lenses. Soldering of ground leads.

ASSEMBLER KELLY SERVICES/LINVATEC (Temp. position.) Largo, Florida. November 11

th

2009-December 2

nd

2009.

Responsible for assembly of “Universal” cables. Solder and crimp wires. ASSEMBLER MANPOWER/HONEYWELL (Temp. position.)

Largo, Florida. May 2009-September 2009.

Responsible for soldering both through-hole and surface mount circuit boards for Navigation unit. Used microscope. Did some potting.

TECHNICIAN AMERICAN COMMUNCATIONS SUPPLY INC. (ACSI) St. Petersburg, Florida. March 2007-July 2008.

Responsible for refurbishing business phones. Test, repair, clean or re-case phones to look like new.

ASSEMBLER/TECHNICIAN PACE TECH

Clearwater, Florida. September 2006-February 2007. Responsible for the assembly, programming of PROMS and flash memory cards, initial calibration and testing of Vital Max 4000 medical monitor which monitors blood pressure, SPO2, ECG, CO2, temperature and pulse. Also test incoming batteries and help with shipping and receiving.

ASSEMBLER/TECHNICIAN SURE FEED ENGINEERING

Pinellas Park, Florida. January 2004-March 2006.

Responsible for the wiring of mailing machines such as the Stand Alone Dryer, Patterning Matcher, Conveyers, Ink Jet, Line Scanner Turn-Overs, Diverts, and Sub-assemblies of TUV Controller Panels, Front Control Panels, Data Cables, Power Cords, Transformers, Power Supplies, Opto boxes and Wire Harness.

Also modified machines at times.

ASSEMBLER/TECHNICIAN PACE TECH

Clearwater, Florida. March. 2003-January 2004.

Responsible for the assembly of the 4000, Minnie Max 4000, and 4100 medical monitors, which monitor blood pressure, SPO2, ECG, CO2, temperature and pulse. Also trained new co-workers and did some stock.

TESTER/TECHNICIAN ROSS ENGINEERING, INC.

Largo, Florida. May 1997-August 2002.

Responsible the calibration, testing and repair of the DSC500 (Digital Select Calling) VHF marine radio, and the repair of Lorans and the Yeoman chart plotter. Worked with fiber optic displays in some radios. All of which used both through-hole and surface mount components. TOOLS AND SKILLS

Solder iron and gun, de-soldering guns, de-soldering suckers, de-soldering blowing bulbs and solder braid. Multi-meters (volt, amp, ohms, capacitance, continuity, transistor gain), logic probes, oscilloscopes, function generators, frequency counters, power supplies, R/C network boxes, EPROM programmers and erasers. Wire cutters, wire wrappers, various strippers, pliers, wrenches, wire crimpers, tuning probes, air guns, microscopes, tweezers, screwdrivers, files, drills, saws, clamps, hammers, cutters, grinders, epoxies, glues, potting, measuring sticks, calipers, and more. I have both thru-hole and surface mount hand soldering and rework/reflow experience. Have repaired P.C. board's traces. Built wire harnesses with both crimped and soldered pins. I have E.S.D. Experience. Worked with pneumatics and fiber optics too. EDUCATION AND TRAINING

October 7

th

2021 IPC J-STD-001 certified.

November 12

th

2009 IPC J-STD-001D certified.

1985-1987 National Education Center/Bauder College Ft. Lauderdale, Florida. Course study entailed AC/DC Electronics, Semiconductor Devices, Microelectronic Devices, Digital Devices, Technical Writing, Microprocessors, Introduction to Computer Electronics and Introduction to TV/VCR Repair.

. Achieved Dean’s List Status four time, three with a G.P.A. of 4.0

. Awarded Perfect Attendance for 1985 through 1987.

. Acquired Associate of Specialized Technology Degree in electronics with a G.P.A. of 3.84. 1984-1985 Sheridan Vocational/Technical Center Hollywood, Florida. Course study entailed AC/DC Electronics, Semiconductor Devices, Electronic Circuits, Digital Techniques, and Introduction to Microprocessors.

1982-1984 B.F. James Adult Center Hallandale, Florida. Study in Electronic Chassis Assembly, G.E.D. and Typing.

Contact this candidate