Walid Elmogassbi

Carolina Shores, NC *****

ad3m7n@r.postjobfree.com

+1-814-***-****

* ***** ** **********, *********:

* Tools: MATLAB, TEMS, Agilent JDSU, PCTEL.

Work Experience

RF Engineer

Netscout Systems - Berkeley, CA

January 2017 to Present

* Good understanding of LTE architecture and signal theory.

* General understanding of Atoll, carrier add, run prediction, power distribution and antenna selection.

* Performed Drive Testing for different carriers like Verizon, T mobile, AT&T 5G, 4G, LTE, 1C/2C sites including shakedowns (SSD), Single Site Verification (SSV) and Cluster Drive

* Collect propagation and signal measurement data for the analysis of RF performance.

* Supervised morphology relevant CW path loss data collection for macro, micro, small cell, in-building/ DAS including frequency clearance verification in accordance with FCC regulations.

* Work independently to gather relevant RF data, as required by the project manager

* Independently plan routes and manage time required to execute the amount of work.

* Identifying location specific needs for new cells taking morphology, performance and population into consideration.

* Studied TX antenna radiation parameters and their impact on data quality alongside RX offsets calculation.

* Perform drive test to evaluate coverage problems and analysis the data.

* Managed the team logistics cost effectively.

* Submitted timely financial activity reports and daily reports.

* Using TruePath to perform data post processing and create measurement and statics reports to help calibration engineers better understanding the way the signal travels.

* Secure access permission from property owner and site technician to perform temporal test site setup including antenna, transmitter, wattmeter, etc. on different buildings and then perform RF data collection for the same site, process the RF data to check the measurements report.

* Worked on 5 G project for Verizon across the country in which I build module for them to help them understand how the signal will travel in specific morphologies.

* Worked on 4 G project for Verizon using there 700, 850, 1900, Aws to build models and predict propagation in dense urban, urban, suburban and rural areas.

* Worked on LAA and CBRS projects for Verizon and Sprint.

* Troubleshoot Laptop. UE and drive test kit like, connectivity, port issues, scanners problems, Appendix gps system and other issues that might come while performing the work.

* Use of RF test equipment such as Network Analyzer, Spectrum Analyzer, Noise Figure Analyzer, Signal Generator, Power Meter to perform tests such as s-parameters and output power.

* Used test assisting tools like Delorme, Trimble, FTP applications for client-server data transfer

* Efficient in on-site troubleshooting, debugging and drafting practical solutions for various issues. Manage ATP, Cluster KPI, FOA test case, software XCAL.

* Proficient in testing and debugging network based GSM, CDMA, UMTS, WiMAX & LTE scanner data collection and data analysis.

* Carried out Lab testing equipment using signal generator, power monitors, network and spectrum analyzer etc.

* Working independently without direct supervision, responsible for arranging logistics for all the team.

* Familiar with FCC and OSHA rules & regulations.

Surveys & Analysis Inc Shrewsbury, MA

Test Engineer

Ericsson

January 2015 to December 2016

* Collect propagation and signal measurement data for the analysis of RF performance.

* Measure field data for the base station to identify RF signals frequencies and respective power levels Follow test plans, follow test site scheduling, understand equipment calibration and setup, RF signal measurement and basic data analysis.

* Work independently days or nights to gather relevant RF data, as required by the project.

* Independently plan routes and manage time required to execute the amount of work that is planned for the project timeline.

* Testing of Mobile device for 2G, 3G, LTE technologies and Wi-Fi for Ericsson, ATT UE's.

* Participated with a team of field engineers in responsibility for checking the validity of E911 functionality, sector verification, and correct call routes. RF Engineer

Sublime Wireless - White Plains, NY

August 2014 to December 2014

contract)

* Performed drive testing for WCDMA, UMTS, 3G, 4G, LTE, VOLTE technologies for AT&

* Collect propagation and signal measurement data for the analysis of RF performance.

* Measure field data for the base station to identify RF signals frequencies and respective power levels Follow test plans, follow test site scheduling, understand equipment calibration and setup, RF signal measurement and basic data analysis.

* Independently plan routes and manage time required to execute the amount of work that is planned for the project timeline.

* Perform site scouting including antenna status, safety, power and equipment check.

* Performed Drive Testing for Sprint and AT&T on 4G LTE Single and Multi-carrier sites using TEMS and JDSU.

* Managed team logistics cost effectively and submitted timely financial activity reports.

* Proficient in testing and debugging network based GSM, CDMA, UMTS, WiMAX & LTE scanner data collection and data analysis.

* Maintain test strategy that includes equipment selection and maintenance of automated test equipment

* Used TEMS tool for drive test log recording, street atlas and street & trips for navigation. RF Drive Test Engineer

Telecom Technology Services Inc - Dallas, TX

April 2014 to August 2014

Internship)

* Performing Drive Testing for AT&T 4G LTE 1C/2C sites including shakedowns (SSDs) and Single Site Verification (SSVs) using JDSU and TEMS.

* Responsible for conducting test drives in different locations, analysis the log files and uploads all data directly to the client.

* Performed drive testing for different carriers like Verizon, T mobile, AT&T 4G LTE 1C/2C sites on single Site Verification (SSV), multi carrier and Cluster Drive.

* Performing WCS testing for Band 30 using PCTEL scanners or HTC phone applications.

* Performing Iperf, stationary, mobility and exit route drive testing.

* Finding good RF conditions where it is good for conducting shakedown test (downlink, uplink, ping, CSFB, Hand over) for 3 cascades tower

* Checked RSRP, RSRQ, CINR, and RSSI in the areas where the sites were present.

* Used TEMS tool for drive test log recording, street ATLAS for navigation.

* Testing done in different morphologies like urban, suburban and dense populations and downtowns.

* Good understanding of signal propagation, RF principles, LTE architecture, LTE call flow, HO failures, connection failures, and call drops causes etc.

* Helping the team lead taking care of logistics for all team member including hotel booking, rental cars and sites access, etc.

* Uploading collected data on the FTP servers using FileZilla and submitting daily reports on time

* Familiar with FCC and OSHA rules & regulations.

Lab Assistant

Gannon University

January 2012 to January 2013

* Responsible for lab equipment.

* Responsible for helping undergrad students understanding spectrum analyzer and other testing equipment.

* Participated in grading and reviewing students assignments. Education

Master of Science in Electrical Engineering in Electrical Engineering Gannon University - Erie, PA

December 2014

Bachelors of Science in Electrical Engineering in Electrical Engineering Bright Star University

Skills

• Operating systems: DOS, Windows and Linux.

• Software: MS Office, AutoCAD

• Equipment: Antennas, Signal generators, Transmitters, TX-receivers, Scanners, amplifiers, Spectrum analyzer, etc.

Contact this candidate