James McCool

**** * **** *****

Tulsa, OK *****

ad2cs1@r.postjobfree.com

918-***-****

**/****-**/**** ******** 6-12 months duration

Toledo Tool and Die Fayetteville, TN

Job Description: Maintenance Technician / Multi Craft - 3rdShift

Overview

Perform the preventative and predictive maintenance on all production and auxiliary

Plant equipment as assigned by the Maintenance Manager according to the

Equipment Maintenance Schedule, with the purpose of minimizing equipment

Break downs and production interruptions.

Responsibilities

The Preventative and Predictive Maintenance includes the following equipment:

Blow molding Presses (Cincinnati Milacron)

Injection molding Presses (ENGL and Cincinnati Milacron)

Machine and production Conveyors

Grinders

Vacuum Pumps

Material Granulators

Hydraulic Trim Press

Production jigs, fixtures, finishing and testing equipment and its mechanical and electrical components

Maintenance and welding room equipment used for maintenance needs

Repairs and troubleshooting are to be performed on the following equipment systems:

Hydraulic system

Pneumatic system

Mechanical components

Plumbing components

Minor and Major electrical

Allen Bradley, Siemens and Eaton PLC’s

Control and safety components

React to production needs by performing necessary repairs, adjustments

Calibrations on the equipment to ensure that quality parts are produced

Equipment down time due to breakdowns is minimized.

Perform major equipment repairs, overhauls and rebuilding as required to

Ensure bringing it back to operation and ensure that the equipment is fully functional and safe.

Fabricate jigs, fixtures and other production tools.

Record daily in department logbooks all repairs and preventative maintenance performed.

Perform new equipment installations as requested by the Maintenance Manager.

Other: Tow Motor, Scissor Lift, Boom, Mule and Lull.

04/2021-06/2022 Full time position

ABC Technologies Gallatin, TN

Job Description: Maintenance Technician / Multi Craft - 3rdShift

Overview

Perform the preventative and predictive maintenance on all production and auxiliary

Plant equipment as assigned by the Maintenance Manager according to the

Equipment Maintenance Schedule of ABC, with the purpose of minimizing equipment

Break downs and production interruptions.

Responsibilities

The Preventative and Predictive Maintenance includes the following equipment:

Blow molding Presses (Cincinnati Milacron and Supreme Tooling)

Injection molding Presses (ENGL and Cincinnati Milacron)

Machine and production Conveyors

Grinders

Vacuum Pumps

Material Granulators

Hydraulic Trim Press

Production jigs, fixtures, finishing and testing equipment and its mechanical and electrical components

Maintenance and welding room equipment used for maintenance needs

Repairs and troubleshooting are to be performed on the following equipment systems:

Hydraulic system

Pneumatic system

Mechanical components

Plumbing components

Minor and Major electrical

Allen Bradley, Siemens and Eaton PLC’s

Control and safety components

React to production needs by performing necessary repairs, adjustments

Calibrations on the equipment to ensure that quality parts are produced

Equipment down time due to breakdowns is minimized.

Perform major equipment repairs, overhauls and rebuilding as required to

Ensure bringing it back to operation and ensure that the equipment is fully functional and safe.

Fabricate jigs, fixtures and other production tools.

Record daily in department logbooks all repairs and preventative maintenance performed.

Perform new equipment installations as requested by the Maintenance Manager.

Other: Tow Motor, Scissor Lift, Boom, Mule and Lull.

08/2017-04/2021 Full time position

Tyson Foods Goodlettsville, TN

Job Description: Maintenance Engineer Level 8 / Multi Craft - 3rdShift

This position is responsible for troubleshooting, maintaining, and repairing all equipment and company

Assets while maintaining a safe work environment and adhering to Tyson policies and procedures.

Tasks

General Maintenance positions are responsible for keeping machinery running to maintain continuous production.

You must be able to set up adjust and break down production line machinery.

Responsible for performing repairs and preventative maintenance of all plant equipment, such as engines, Motors, pneumatic tools, conveyor systems and production machines.

SAP-Software for work orders and daily documentation that is required in the system.

Allen Bradley, Siemens and Eaton PLC’s

May be required to become HAZ-MAT member and pass the required level for HAZ-MAT.

Standing, walking, bending, stretching, climbing, pushing, pulling, and reaching are required to include work on ladders.

Must be willing to lift 70lbs and must be willing to work on your feet for a period of 12 hours +.

Other: Tow Motor, Scissor Lift, Boom, Mule and Lull

02/2016-02/2017 Part time Advance Auto Parts Charlotte NC Job Description: Commercial Delivery Driver Capable of supporting delivery of parts to commercial customers. The role has the responsibility to deliver parts to our commercial customers and assist with task and inventory processes in the store. Primary Responsibilities: Safely deliver parts to customers as needed. Pick and stage parts for customer orders. Pick up returns and cores. Secondary Responsibilities: Store Cleanliness including floors, bathrooms, facing, dusting, parking lot, trash bins. General stocking including truck stocking and back stock rooms.

06/2015-01/2016 Part time

Ashford Green Charlotte, NC

Job description: Maintenance / Grounds

Summary and Responsibilities:

The Maintenance Technician II is responsible for maintaining the physical integrity of the property

and assisting the Maintenance Supervisor with their responsibilities.

This includes maintaining a safe and sanitary living environment for residents, guests, visitors and staff.

The Maintenance Technician assists with all aspects of the property's maintenance including the physical grounds, custodial, Preventive, corrective, deferred and emergency.

Complete make-ready process of vacant apartments as directed by the Property Manager.

Assist grounds work when directed by Property Manager which may include picking up trash, sweeping curb and dumpster areas.

Snow removal (if applicable)

Stair treads and cove basing

Removing bulk trash (including appliances)

10/2014- 06/2015 Part time

The Retreat Charlotte, NC

Job description: Maintenance / Grounds

Summary and Responsibilities:

The Maintenance Technician II is responsible for maintaining the physical integrity of the property

and assisting the Maintenance Supervisor with their responsibilities.

This includes maintaining a safe and sanitary living environment for residents, guests, visitors and staff.

The Maintenance Technician assists with all aspects of the property's maintenance including the physical grounds, custodial, Preventive, corrective, deferred and emergency.

Complete make-ready process of vacant apartments as directed by the Property Manager.

Assist grounds work when directed by Property Manager which may include picking up trash, sweeping Curbs and dumpster areas

Snow removal (if applicable)

Stair treads and cove basing

Removing bulk trash (including appliances)

09/2013 –09/2014 Part time

North Woods Apts. Columbus, OH

Job description: Maintenance / Grounds

Summary and Responsibilities:

The Maintenance Technician II is responsible for maintaining the physical integrity of the property

and assisting the Maintenance Supervisor with their responsibilities.

This includes maintaining a safe and sanitary living environment for residents, guests, visitors and staff.

The Maintenance Technician assists with all aspects of the property's maintenance including the physical grounds, custodial, Preventive, corrective, deferred and emergency.

Complete make-ready process of vacant apartments as directed by the Property Manager.

Assist grounds work when directed by Property Manager which may include picking up trash, sweeping Curbs and dumpster areas

Snow removal (if applicable)

Stair treads and cove basing

Removing bulk trash (including appliances)

12/2012-07/2013 Contract 3-6 months duration

HONDA North America Marysville OH

Job description: “Temp Backfill position” Onsite NOC Network Engineer III

Summary and Responsibilities:

Performs Network problem detection, analysis and resolution.

Site production and office environments (routed/switched networks, wireless network infrastructure.

Physical wiring, installation and troubleshooting. Coordinates with cabling contractors to install and or

demo out fiber and copper wiring for miscellaneous requests and plant projects.

Analyzes and enhances network monitoring tools to provide timely and appropriate alerts based on accurate thresholds.

Plans, designs and implements network architecture additions and modifications within the plant.

Daily Tasks: Proactively monitors wired and wireless infrastructure using monitoring tools (Cisco Works, Fluke).

Allen Bradley, Siemens and Eaton PLC’s

HONDA North America (Cont’d)

Identifies, troubleshoots and resolves Network connectivity issues.

Supports hardware adds/moves/changes, cabling changes/repairs, replacing network equipment,

Network infrastructure changes, etc.

Advanced knowledge and / or experience with PLC Programming.

Familiarity with programming / troubleshooting robotic welders.

Ability to interface with, update, and troubleshoot PLC machine programs

Administration and Configuration: Cisco Routers, Switches and Access Points

10/2011-09/2012 Contract 6-12 months duration

Wells Fargo Winston Salem NC

Job description: Remote NOC Network Analyst III

Summary and Responsibilities:

Responsible for installation of: Cisco Routers, Switches at Branch and ATM Machine locations.

Plans and schedules work with Field Engineers to minimize disruption to customer productivity.

Oversees implementation(s) to ensure all design objectives are met and in line with the approved specifications.

Assist Field Engineers with Installation, configuration and troubleshooting of each Cisco devices where necessary.

Suppress each device in Tools prior to test and turn up.

Test of Perl scripts on each device prior to test and turn up within NPE Tools.

Builds and runs Perl scripts pre and post to each device to check for errors in NPE Tools.

Run pre- and post-scripts within HPNA.

Check all scripts and zip them up to be uploaded to a central repository for review in share point.

Administration and Configuration: Cisco Routers and Switches

06/2009-08/2011 Full time position (Mass Lay off)

CompuCom Blue Ash Ohio

Job description: Remote NOC Network Analyst III

Summary and Responsibilities:

Responsible for: the installations and maintenance of Cisco devices.

Plan, analyze, and provides scope of work to the Field Engineers.

Handles and responds appropriately to client escalations.

Ensures all SLAs are met on open cases submitted from BT / P&G, following the ITIL process.

Act as Level 3 support for LAN / WAN trouble tickets submitted from BT / P&G.

Analyze and resolve technical problems of established Networks.

Works with the Telco’s to resolve complex network problems.

High-level and detailed use cases (Requirements gathering).

Plans and schedules work for each Field Engineer to minimize disruption to customer productivity.

Schedules and works with field Engineers for test and turn up at each site.

Oversees implementation(s) to ensure all design objectives are met and in line with the approved specifications.

Assist Field Engineers with Installation, configuration and troubleshooting of Cisco devices.

Assist the field Engineers with Wireless Site Surveys for Voice and Data.

Assist the field Engineers with the final PDF documents of each Wireless Site Survey.

Administration and Configuration: Cisco Routers, Switches and Access Points, PLC Programming.

01/2007-05/2009 Full time position (Mass Lay off)

Siemens / SEA US OFFICE Mason Ohio

Job description: Onsite NOC Network Engineer III 3rd shift

Summary and Responsibilities:

Performs LAN/WAN remote troubleshooting to isolate and diagnose Network issues (23 accounts).

Upgrade Network hardware and software components as required using the appropriate hardware and software tools.

Respond in accordance to SLA for generated client trouble tickets following the ITIL Process.

Advanced packet analysis for problem determination and troubleshooting.

Coordinate system changes with appropriate partners, clients, and internal staff to minimize disruption.

Aide and assist Network Engineers with Client projects and completing client site surveys.

Networking tools: Solar winds, H P Open View, Tivoli, Orion and Alter point.

Experience with: Network performance alerting, event correlation, and reporting.

Experience with: Network device discovery and topology mapping.

Administration and Configuration: Cisco Routers, Nexus and Catalyst Switches, Access Points, VPN Concentrators, PIX / ASA Firewalls, Nokia IPSO Check Point VPN-1 FireWall-1, Nortel Switches, Juniper Routers and F5 devices.

01/2004-01/2007 Full time position (Down sized)

Sterile Recoveries Mason Ohio

Job description: QA Technician 2nd shift

Summary and Responsibilities:

Assist Quality Supervisor in quality instruction and control of sterile products.

Ensure quality control functions are preformed according to written Standard Operating Procedures.

Assist with facility training of new employees, annual updates and other required instruction as needed.

Responsible for maintenance of training logs, documents in coordination with human resource records department.

Maintain sterility release records and coordinate daily releases of individual lots.

Responsible for the collection and analysis of all documents of product complaint programs as directed by Management.

Responsible for analyzing statistical data gathered by process and audit making appropriate recommendations based on

Administration: Analysis and reporting of data on AS400 / RPG

05/2003-12/2003 Contract 3-6 months duration

Cincinnati Public Schools Cincinnati Ohio

Job description: Consultant Onsite Lead Network Engineer III

Summary and Responsibilities:

Mapped and traced out network drops at each school.

Documented each school and updated the database.

Designed working Topologies and updated each school using Visio.

Upgrade of each School with Cisco devices to build a scalable Cisco Network.

Administration and Configuration: Cisco Routers, Switches, Access Points and ASA/PIX Firewalls

Relocated back to America

01/2002-04/2003 Contract 3-months

Sun Microsystems Sydney AU

Job description: Consultant to Sun Microsystems

Summary and Responsibilities:

Planned and procured information systems components and provided technical advice.

Managed and maintained installation and configuration of Servers and Network devices.

Technologies: Sun Server Architecture Java, J2EE, Struts, and ECO structure.

Web Technologies: XML, HTML, Java, C/C++, Perl Web

Application Server: I Planet, ATG Dynamo, MTS, Site Minder. Databases: Oracle 7

01/2001-01/2002 Contract 12-months

Com Tech / Dimension Data Sydney AU Cape Town Africa

Job description: Onsite NOC Senior Network Engineer III

Summary and Responsibilities:

Ability to Resolve and manage to resolution, LAN / WAN issues escalated by Level 2 Engineers.

Ability to audit and review Client Firewall logs for potential security leaks.

Ability to redesign complex legacy Networks to a Scalable Cisco Network.

Provided project plans, Visio documents, build of materials (BOM), and costs of billable hours.

Ability to test each Network before the deployment of each roll out to the data centers.

Administration and Configuration: Cisco Routers, Switches and ASA/PIX Firewalls

10/2000-01/2001 Contract 3-months

Peak hour Sydney AU

Job description: Consultant Onsite NOC Network Engineer III

Summary and Responsibilities:

To implement Voice and Data infrastructure for Melbourne and Sydney sites.

Administration and Configuration: Microsoft Windows 2000 Microsoft SQL 2000 Microsoft Exchange 2000

Backup Exe - v. 8.5 Cisco Routers, Switches and ASA/PIX Firewalls Nokia IPSO Check Point VPN-1 FireWall-1

10/1999-10/2000 Contract 12-months

IBM Olympic Project Sydney AU

Job description: Network Supervisor International Broadcasting Center

Data Center A and Data Center B

Summary and Responsibilities:

I was part of the Core Team that planned and deployed the Sydney 2000 Games Network.

We managed the installation of LAN WAN equipment, and end to end connectivity testing with the Telco’s.

We managed all LAN WAN device installations for each Computer Equipment Room (CER).

We managed and tested end to end connectivity between terminal devices on the LAN and WAN Networks.

We managed fault diagnosis, problem tracking, escalation and service restoration of each Network.

Configuration: IBM 8260 and 8265 Utilized Tivoli for monitoring of all Network Devices.

04/1999-10/1999 Contract 3-6 months duration

NCR Sydney AU

Job description: Consultant for: Allen, Allen & Helmsley Law Firm Project Team Lead Engineer

Summary and Responsibilities:

Deployment project in support of SQL and Doc's Open.

Microsoft Windows NT 4 Microsoft SQL 7 Microsoft Exchange 5 Doc's Open

10/1998-04/1999 Contract 3-6 months duration

Siemens / Fujitsu Sydney AU

Job description: Consultant Onsite Network Engineer for the ANZ Bank

Summary and Responsibilities:

Reduced cost of deploying and supporting enterprise applications and enabled a remote thin client solution.

Administration and Configuration: Microsoft Windows NT 4 Server and Workstation

Relocated to Australia

01/1996-08/1998 Contract open end with no duration

Toyota North America Georgetown KY and Erlanger KY

Job description: Consultant Onsite NOC Network Engineer

Summary and Responsibilities:

Ensure delivery of services through managing relationships with outsourced service providers.

Ensured corporate policies and procedures are being complied with across the corporate platforms.

Allen Bradley, Siemens and Eaton PLC’s

Robotics, Electrical, Mechanical, Hydraulic and Pneumatic systems.

Administration and Configuration: Microsoft Windows NT 4 Server and Workstation

07/1995-12/1995 Contract 3-6 months

Provident Bank Cincinnati Ohio

Job description: Consultant Onsite NOC Network Engineer

Summary and Responsibilities:

Document the physical networks.

Identified faulty devices effecting network performance, using NET cat 800 LAN Analyzer.

Provide technical support to staff for computers and printers.

Upgrade of existing computers for access across multiple domains.

Management of: Avaya Telephone systems.

Administration and Configuration: Microsoft Windows NT 351 and NT4Novell 4Backup Exe

04/1995-07/1995 Contract 3-6 months

UPS Cincinnati Ohio

Job description: Consultant Onsite NOC Network Engineer

Summary and Responsibilities:

Administration and Configuration of: Microsoft NT 4 Server and Workstation for external clients.

09/1990-12/1994 Full time position

East Carolina School of Medicine Greenville, NC.

Job description: Analysis IV

Summary and Responsibilities:

Report coding and distribution of medical reports.

Administration: AS 400 (RPG) Sun Quest System (UNIX based)

04/1981-08/1990 Full time position

Smith Kline Beecham Nashville, Tn.

Job description: Supervisor

Summary and Responsibilities:

Administration: TANDEM Non-Stop, Mod comp, IBM 36

Operating Systems: Mumps, COBOL, FORTRAN

08/1985-08/1990 Co Op-2 nights per week

Castner Knott & Company Nashville, Tn.

Job description: Support Services Analyst

Summary and Responsibilities:

OS2 Server and Workstation administration and configuration.

Education:

Davidson Business College Nashville, Tn.

Computer Science / Business Law

Dalton College Dalton, Ga.

Computer Science / Engineering

References supplied upon request

Contact this candidate