Name: KyuIn Shin E-mail: aczx30@r.postjobfree.com

Mobile: 703-***-****

CV (Curriculum Vitae)

Personal Information

Name: KyuIn Shin

Date of Birth: Sep. 20, 1968

Language: English, and Korean (mother tongue)

Martial Status: Single

E-mail: aczx30@r.postjobfree.com / aczx30@r.postjobfree.com H.P) 703-***-****

Present Address: : 8385 Westwater Park, Centraville, VA 20121, USA Education

- B.S. in Dept. of Industrial Safety Engineering, Chungbuk National University, Korea

(Mar. 1987 – Aug. 1994)

- M.S. in Dept. of Safety Engineering, Chungbuk National University, Korea (Mar.1995 – Feb. 1997)

*M.S. Thesis: “Comparison of Elevated Temperature Fracture Toughness Behavior between New and Aged 1Cr-0.5Mo Steel Weldments”

- Ph.D. in Dept. of Safety Engineering, Chungbuk National University, Korea

(Mar. 1997 – Feb. 2003)

*Ph.D. Thesis: “Fracture Mechanics Analysis of Tubes Damaged by Corrosion and Wear” Summary of Experience

Safety Investigation to identify and eliminate Incidents/ Hazards in Laboratory/Industry

RISK Assessment such as PSM, FFS, RBI, FMEA, FTA, CA, etc.

2/3D FEM Analysis using ANSYS, ABAQUS, and PATRAN:

Linear & Nonlinear Statics (Elastic, Elastic Plastic, Plastic Instability, Contact etc.)

Fracture Mechanics (Fracture Toughness (K, J), Fatigue, etc.)

Structure and Component Design Modeling:

PATRAN, CATIA and Solid Works (beginner and intermediate level)

Test/Experiment at room & high (550oC) temp. including the Weld (especially HAZ) by ASTM:

Mechanical Properties, Charpy Impact test, Creep rupture test

Fracture Toughness (K & J) test, SP (small punch) test

Code & Standards:

Structure Design, Structure Integrity Assessment, and Safety Investigation according to ASME Sec. III, RCC-MR(x), R6, API579-1, ANSI B31, etc.

Evaluation Pressure Vessel and Pipe System according to ASME Sec. VIII/ XI, ASME B31.

Resolve Technical Problems for Long Serviced Facilities:

Material Degradation Assessment using Replica Method

Fracture Morphology Observation using SEM to evaluate Fracture Behavior based on ASM Handbook Vol. 12 Fractograph.

Name: KyuIn Shin E-mail: aczx30@r.postjobfree.com

Mobile: 703-***-****

Career Highlights

CHSA (Corea Health & Safety Association), Feb. 2016 ~ Feb. 2017 Location : Seoul, Korea/ Position : Advisory Commissioner

Application of SP (small punch) Test for Material Degradation Evaluation, and the Sampling Equipment for Obtaining the Miniature Specimen, KHNP (Korea hydro & nuclear power), 2016.

Evaluation of wall thinning elbow for Structure Integrity based on Strength Reduction Factor in Plastic Instability Analysis using ABAQUS.

Safety Investigation for Identifies and eliminates hazards in the Laboratories/ Plants

Lecture: “Safety in Gas Facilities” Korea University of Technology and Education, 2016.

Lecture: “Risk Analysis Method and PSM for Construction”, Dongkuk University, 2016 Jentec Technology Co., Aug. 2014 ~Sep. 2015

Location : Dejeon, Korea/ Position : Senior Researcher (Team Manager)

The CDR (concept design report) for ITER project

Structure Intigrity Assessment considering Load Combination for HCCR

The Modal and Spectra Response Analysis of a Korean HCCR TBM for the Seismic Events using ANSYS

Structural Design and Integrity Analysis of Korean HCCR TBM for ITER project using ANSYS

Material Specification of Korean HCCR TBM for ITER project

Electro-magnetic Stress Analysis for HCCR TBM using ANSYS

Fracture toughness (JIC, J-R) analysis, Creep Rupture, and Creep Relaxiration analysis using ABAQUS

The residual stress analysis in the weld region using ANSYS KAERI (Korea Atomic Energy Research Institute), Apr. 2012 ~ Apr. 2014 Location : Dejeon, Korea/ Position : High-grade trainee Researcher

The structure design of TBM (test blanket module) based on ASME Sec. III and RCC-MR(x) codes using ANSYS

Fatigue Life assessment for ITER Blanket First Wall for ITER

Quality Assurance from Standard Weld Test Procedure, and Establishment of PWHT (post weld heat treatment) condition for TBM weld fabrication based on ASME Sec. III and RCC-MR(x)

Strength Evaluation of HAZ in TIG (tungsten inlet arc) and EB (electron beam) welded material at room and high (550 oC) temperatures from the SP (small punch) test Korea University, Oct. 2008 ~ Mar. 2011

Location : Seoul, Korea/ Position : Research Professor

Evaluation of the allowable local thickness in pipe based on ASME Code Case-N597 using ANSYS

FE analysis for Safety Assessment of Type III pressure vessel using ABAQUS.

Structural integrity analysis of a SG (steam generator) tube with the combination through-wall crack using ABAQUS

Structural integrity analysis for a decision of the operating temperature change in Hyper & Reactor section pipe based on ASME Sec. VIII, and Hitachi using ABAQUS Name: KyuIn Shin E-mail: aczx30@r.postjobfree.com

Mobile: 703-***-****

Thermal stress and Elastic-Creep analysis considered a start-up operation history (time vs. pressure and time vs. temperature) in boiler header using ABAQUS

Fire accident investigation in Pressure Vessel and Pipe in Plants

Lecture: “Materials Science and Engineering,” Dept. of Machinery System Engineering, HanSung University (Mar. 2009 ~ Aug. 2009).

Tohoku University, Mar. 2007 ~ Feb. 2008

Location : Sendai, Japan/ Position : Researcher Fellow and Education Research Supporter

Development and Evaluation of DCPD (direct current potential drop) method with adjustable four-point probes in NDE

Chung-Ang University, Nov. 2004 ~ Mar. 2007

Location : Seoul, Korea/ Position : Full-Time Researcher

Safety Management; PSM (process safety management) activity according to API 581 with KOSAH (Korea Occupational Safety Health Agency)

Limit load, and Creep analysis for the remaining life assessment of a weld region in T-, and Y-pipe using ABAQUS

Plastic Collapse analysis in elbows with the various shapes of wall thinning area based on ASME XI, ASME Code Case N-597, and ANSI/ASME B31.1 codes using ABQUS

FFS Evaluation for Pressure Vessel and Pipe System with KGS (Korea Gas Safety Corporation) according to API 579-1

Accident Investigation for Pressure Vessel and Pipe System

Lecture; “Fundamentals in Modern Science and Technology” in College of Engineering, Chung- Ang University as a part-time lecturer (Mar. 2006 - Aug. 2006). KINS (Korea Institute of Nuclear Safety), Mar. 2003 ~ Oct. 2004 Location : Daejeon, Korea/ Position : High-grade trainee

Elastic-plastic analysis of the inclined defected SG tube for the structural integrity assessment in Plant using ABAQUS

Burst pressure analysis for Structural Integrity of a SG tube with T-type combination crack considered tubesheet effect in Plant using ABAQUS

Accident Investigation from SGTR (steam generator tube rupture) accident in Korea Nuclear Power Plant.

Unified terminology of SGTR based on NUREG guide, the viewpoints of leakage, defect, and operator.

KRISS (Korea Research Institute of Standard and Science), Sep. 1994. ~ Dec. 1996 Location : Daejeon, Korea/ Position : Research student

Mechanical properties, Charpy impact, Creep-fatigue, Fatigue crack growth and Creep rupture test and experiments

Fracture toughness behavior (J-R curve, and JIC) experiment in new and long serviced (30 years) welded materials (1.25Cr-0.5Mo steel), especially HAZ (Heat Affective Zone), at room and elevated (538oC) temperature.

Evaluation of the material degradation by using Replica method

Contact this candidate