Quality Assurance Technician with over 16+ years experience
Resume:
MANGAT RAI
***** ******** ***** ********** ***. OH 44130
Mobile :440-***-**** E-mail: acvwin@r.postjobfree.com
Objective: To acquire a challenging Quality Assurance Technician position
Continuing Education:
AIAG - FMEA (Failure Mode and Effects Analysis) – Oct. 2013 – at Polaris
ISO 13485 and IQ/OQ/PQ Installation Protocols Apr-Sep’ 2013 at Criterion.
ASQ- Certified Mechanical Inspector since October 2001.
Geometric Dimensioning & Tolerance by ASQ/TRI-C 2001.
ISO9000 30 Hours CD ROM course at CVCC- Brecksville- 2001
Technical Mathematics-I Course # 1160 at TRI-C 2001
Highest Education:
Bachelor’s Degree in Mechanical Engineering - I.I.T. Delhi, India
Computer Literacy:
Microsoft Excel, Word, Power Point, Internet including Outlook and E-2 & E-9 ERP
Router Software/s. I-Logic IMS Fonts for G.D. & T, Managing GAGEtrak/GagePAK
System for Gage Entries/Calibrations. Flow Charts using “Smart Draw”
Experience:
Almost sixteen years’ combined inspection experience in CNC Turning/Milling, Injection molded plastics, Automotive, Turbine Engine and Medical Devices parts requiring close tolerances. My experience includes Micrometers, Calipers, Pi-Tapes, Height Gages, Bore Gages, Test and Dial Indicators, Thread Gages, Optical Comparators, Hardness and Surface Testing equipment, Sine Bars and Gage Blocks, Roundness Testing, pre-programmed CMMs (Zeis-Calypso; Brown & Sharpe-PC-DMIS; Mitutoyo-Geomeasure) and OASIS- Vision System.
Proficient in Blueprint reading and Math skills essential for inspecting complex parts relative to G.D. & T. callouts and experienced in Calibrating Gages.
First Article/In-Process/Final Inspection of close tolerance parts.
Maintain and analyze SPC data using customized software.
Resolution of Non-Conforming products and communications within operating departments/Customers/Suppliers.
Value added improvements in existing Inspection procedures achieving higher accuracy
and reduced scrap/Rework.
Observe ISO 9001-2008 / TS 16949 requirements and perform other duties as directed by Q.A. Manager. Worked on ISO 13485 Quality Manual, Procedures, Work Instructions and Flow Charts at Criterion Tool & Die as lead TEAM member.
Work History:
FCI Inc. Mar’11-15- present Cleveland Fabsulation Products
Global Technical Recruiter Jan’03-14-Jan’22-15 Middleburg Hts. Aerosapce Parts
(Working at HyComp INC)
Criterion Tool & Die Co. May’10- Oct 7’13 Brook Park-OH Medical Devices Parts
Ferrotherm Corporation Apr’09-Sep’09 Garfield Hts.-OH Turbine Engine Parts
A.J. Rose Manufacturing Co. Aug’08-Nov’08 Avon-OH Automotive Parts
JACO Manufacturing Co. Sep’04-Jul’08 Berea-OH Injection Molded Parts
Royalton Manufacturing Jan’00-Jul’04 North Royalton-OH CNC (Turn/Mill) Parts
Work History –Details:
Employer Employed End Reason for leaving
J.J. Delong Recruiters 03/11/2015 thru JJ Delong 08/30/2015 Hired by FCI
(Working at FCI Inc.) 08/31/2015 Hired by FCI Still Working
My job at FCI involves approving First Piece and Final Inspection of Industrial, after market Bottling and Packaging parts from metals, plastics and other non ferrous materials for electronics industries using CNC Turning, Milling, silk screening and other processes.
During the short period of my employment I created an In Process inspection procedure with Flow Chart and assisted my supervisor in improving their current Inspection Form and provided many suggestions to improve the Job Traveler.
FCI was recently acquired by Bevcorp LLC of Willoughby- Ohio, a subsidiary of Emprotech Corporation and is in the process of implementing their management philosophy and systems and I was hired to assist in their efforts in improving their quality control functions.
Global Technical Recruiters 1/03/2014 1/22/2015 Laid off
(Worked at HyComp INC.)
My job at HyComp involved calibrations of over 1600 employee and Company tools and gages using GagePack software, Parts inspection and Gage R&R studies and conducting special studies for Quality Manager. I also introduced new Mueller gages to facilitate more accurate hole measurements with tolerances of +/- .0005”. All thread gages were put in HyComp AutoCrib so each employee will issue and return against his name instead of no formal system of issue and return. Duplicate critical and often used gages were ordered to ensure one gage was always in house when other was sent for outside Calibration.
Criterion Tool &Die 5/28/2010 10/7/2013 Voluntary Quit
5349 W. 161st Street (Personal Reasons)
Brook Park, OH 44142
My job at Criterion involved, First Article, In-Process and Final Inspections of precision machined parts with tolerances of +/- .0002 with G.D.&T callouts mostly for Medical Devices using Inspection instruments and gages as specified in Inspection Reports. I was also responsible for manual Ballooning of customer prints using I-Logic IMS Fonts software for creating Inspection Reports in Microsoft Excel. I was able to train a new employee in doing Ballooning and was assigned to re-activate GAGEtrak Calibration software for all Inspection Room Gages after a lapse of two years. I also trained the same employee in GAGEtrak while I continued assisting Inspection Department in First Article, In-Process and Final Inspections.
From April 2013, I was assigned as a Team Leader to implement IQ/OQ/PQ Installation Protocols and from July 2013, I was selected to work as lead TEAM member for ISO 13485 Certification Project closely involved with making changes to ISO 9001-2008 Quality Manual, Procedures and Work Instructions including various flow charts using Smart Draw with the involvement of an outside Consultant, Company President and Quality Assurance Manager.
My Above and Beyond contributions at Criterion included Re-activation of Cybermetric’s GAGEtrak software after a lapse of two years. Elimination of Monthly printing of Indirect Job Travelers saving 92% in paper usage annually and Printing of Job Travelers and Inspection Reports on both sides saving about 45-50% in paper usage on an ongoing basis. I also created a “Technical Topics” Folder by researching difficult to understand or new topics from Internet that was recognized as big help to everyone at Criterion.
Ferrotherm Corporation 4/28/2009 9/21/2009 Voluntary Quit
4758 Warner Rd. (Personal reasons)
Garfield Hts. OH-44125
Ferrotherm is a precision CNC turned/milled component supplier to Aerospace Industry and specializes in supplying turbine engine components like Machined Segments (shrouds), Rings and Sheet metal assemblies with honeycomb bonding, a specialized process.
My job at Ferrotherm involved Receiving Inspection, In-Process inspection and Final Inspection using Calipers, Micrometers, Pi-Tapes, Height Gages, Gage Blocks, In-house attribute/measurement fixtures and gages and running Pre-programmed Mitutoyo CMMs.
A.J. Rose Manufacturing 8/18/2008 11/7/2008 Laid off per Union Contract
38000 Chester Rd.
Avon, OH-44011
A.J. Rose is an Automotive parts manufacturer supplying parts such as precision power train and automotive components, A/C Clutch components, Advanced sensor rings, Water pump hubs, Precision Stampings, Air Bag pressure vessel components.
My job at A.J. Rose involved inspection of Incoming materials, Start-ups, In-Process and End-of-Run parts inspection using Micrometers, Calipers, height gages, bore gages, test and dial indicators, optical comparator, hardness tester, surface finish testing equipment, out of round testing machine, Vision System and Zeiss CMMs.
Jaco Manufacturing Co. 9/7/2004 7/7/2008 Laid off –Lack of work
468 Geiger St.
Berea, OH- 44017
Jaco Manufacturing specializes in Custom Molded plastic parts and compression Fittings for various segments of Industries.
My job at JACO involved, Start-ups, SPC, In-Process and End of Runs using calipers, micrometers, height gages, optical comparators, air flow and leak testing vacuum gages and Brown & Sharpe CMM. I was awarded Performance & Quality Recognition as well as Safety Recognition Awards at JACO.
Royalton Manufacturing Co. Jan-2000 July 2004 Laid off – Lack of work
13761 Abbey Rd.
North Royalton OH-44133
Royalton Manufacturing is a small job shop making small batches of precision CNC turned and milled parts.
My job involved inspecting and approving Starts/Restarts, In-process Inspection and Final End of Run Inspection using Calipers, Micrometers, Gage Blocks, Sine Bars, Hardness Tester, Optical Comparator, Surface Tester, Bore Gages including Sunnen and Mueller Gages etc. Was also responsible for First Article and In-house calibration of some tools and gages.
Traits observed by Superiors/Co-workers:
Once I have gone through the basic orientation at a new place of work, I can work independently without much supervision. I have been observed by my superiors and co-workers to be very organized and detail oriented, thorough and accurate in my work and a meticulous record keeper. My reviews mostly were as meeting or exceeding expectations
I can communicate verbally and in writing all across the organization in a persuasive manner using facts both in positive and negative situations.
I have been seen as someone who looks for ways to improve on how we do things for reducing costs by eliminating or reducing scrap/rework at different stages of manufacturing.
I am open to others’ views and welcome feedback and contribute to and support everyone to succeed as a TEAM as I am a firm believer in “Together Everyone Achieves More”.
Contact this candidate