Daniel W. Amthor

***** **** ***** **

Athens Al, 35614

Cell Phone 931-***-****

acvrnh@r.postjobfree.com

OBJECTIVE

Seeking an inspector or technician position for Nondestructive Testing and/or Aerospace Quality Assurance/Inspection. Under the right circumstances, would also consider a position as a mechanic or welder.

SUMMARY

Specialization in Nondestructive Inspection (NDI).

ASNT TC-1A Level II Certifications in Ultrasound (UT), Eddy Current (ET), Fluorescent Penetrant (PT), and Magnetic Particle (MT). NAS 410 in Radiography.

A&P License (FAA Airframe and Powerplant License) #2806137.

FAA Repairman’s Certificate for NDT #3464995.

FCC (Federal Communications Commission) GROL Master of Communications Technology

License #PG-GB-055280.

Alabama State Industrial Radiography card #1426.

Supervisory Experience in NDT, aircraft maintenance, and retail.

Is a member ASNT (American Society of Nondestructive Testing.)

Extensive mechanical knowledge; repair, preventive, and scheduled maintenance.

While serving in the Army, deployed in support of Operation Iraqi Freedom and to various training exercises.

Experience in nondestructive inspection and maintenance on every airframe in the Army inventory, many Air Force, and most Boeing and Airbus airframes.

Extensive Quality Assurance and Quality Control expertise.

WORK HISTORY

2011-Present NDT, United Launch Alliance

Level II Certifications IAW QS-601 in Eddy Current, Fluorescent Penetrant, and Radiography.

Also qualified in every way save permission for Ultrasonics, Magnetic Particle and Thermography.

Visual Weld Inspector, Thickness measurement, and IACS conductivity inspection certified.

Familiar and experienced with Delta II, Delta IV, and Atlas V and Centaur.

2007-2011 NDT, Aeroframe Services

Level II Certifications in accordance with ASNT TC-1A in Ultrasound, Eddy Current, Fluorescent Penetrant, and Magnetic Particle.

Also qualified in Infrared Thermography and Resonance Frequency Bond testing.

Thickness measurements and IACS conductivity inspections.

Familiar with most Airbus Airframes as well as FedEx, Omni Air, Virgin Airlines, ADI, Air Comet, US Airways, Air Canada, Frontier, USA3000, and several other carriers.

Cargo, passenger, and military configurations.

Experienced as NDT inspector and mechanic in both heavy “B” checks and “C” checks.

2004-2007 NDI and General Aircraft Mechanic, DynCorp International

Certified as a level II technician to NAS 410 in Eddy Current, Ultrasonic, Fluorescent Penetrant, and Magnetic Particle.

Worked as sole NDI technician for the entire Ft. Campbell UH-60 Reset program, in addition to limited NDI support for non-Reset aircraft.

Also responsible for all boroscope inspections on site.

Performed extensive corrosion control and repair on all systems.

Working knowledge and understanding of all UH-60 airframe, systems, and subsystems.

Have worked as a UH-60 technician as a member of maintenance team.

Requirements: disassembly, inspection, repair, reassembly, troubleshooting, and rigging of Black Hawk helicopters.

Inspection, repair, installation, and modification of sheet metal structures, and advanced composites such as fiberglass, Kevlar, and carbon fiber.

1998-2004 NDI and Helicopter Repairer, U.S. Army and MOANG AVCRAD

Certified Level II Radiography, Ultrasound, Eddy Current, Fluorescent Penetrant, Magnetic Particle, and Bond Testing.

Served in the U.S. Army as 68D20N2 (Aircraft Powertrain Repairer with Nondestructive Inspectors additional rating) and is 67Y10 (AH-1 Cobra helicopter repairer) qualified.

Performed extensive nondestructive inspections, maintenance, and repairs on every airframe in the Army inventory as well as several Air Force aircraft.

For three years, with the assistance of just one other person, personally performed the periodic and special inspections for every aircraft associated with the 101st Airborne Division.

Worked at both the AVIM and Depot level.

EDUCATION

2014-present Enrolled Welding Technology Calhoun Community College, Decatur Al

(Completed welding portion, now working on the degree portion)

2009-2009 Graduated Airbus Elevator and Rudder Familiarization Courses, Miami FL

2008-2008 Graduated ITC (FLIR) Lvl 1 Infrared Thermography Course, Memphis, TN

2003-2007 College course work Professional Aeronautics, North Central Institute, TN

2003-2004 Graduated Part 65 Airframe and Powerplant Course, North Central Institute, TN

2002-2002 Graduated US Army TACOM Radiation Safety Handling Course, Ft. Campbell, KY

2001-2001 Graduated Army/Air Force Non-Destructive Inspection School, Pensacola, FL

2000-2000 Graduated Walton Leadership Foundations Managers School, Bentonville, AR

1999-1999 Graduated FCC Master of Communications Technology Course, Newport News, VA

1999-1999 Graduated 68D10/15D10 Powertrain Repairer Course, U.S. Army Aviation Logistics School, Ft. Eustis, VA

1998-2004Miscellaneous Army schools: Sabalauski Air Assault School, Combat Lifesaver, 40 hr Drivers Training, Avion Static Blade Balancing Course

1998-1999 Graduated BASIC training, United States Army Training Center, Ft. Jackson, SC

1996-1998 High school Diploma, Rogers High

LICENSES & CERTIFICATES

Calhoun Welding Certificates (Advanced and Basic Manufacturing).

Nondestructive Testing Level 2 (SNT-TC-1A, NAS 410, and QS-601); Eddy Current, Ultrasound (not QS-601), Fluorescent Penetrant, Magnetic Particle.

Level 2 Radiography (only NAS 410 and QS-601).

Federal Communications Commission (FCC) Master of Communications Technology # PG-GB-055280.

A&P #2806137; Federal Aviation Administration Airframe and Powerplant license.

Repairman’s Certificate from Federal Aviation Administration #3464995.

Avion Static Blade Balancing Certificate (Main and Tail Rotor).

Alabama State Industrial Radiography card #1426.

Pallet truck, Stand-up Forklift and several other heavy machinery licenses (Wal-Mart).

US Army Vehicle Operator License (more than 20 vehicles to include all forklifts).

LANGUAGES

Speaks and writes fluent English.

Speaks and writes fluent German.

AWARDS RECEIVED

President’s List, Calhoun College.

Graduated High School with High Honors 1 full year early.

Outstanding service as a Squad Leader 1999.

Army awards: Army Commendation Medal, Army Achievement Medal, Global War on Terrorism Expeditionary Medal, GWOT Service Medal, Good Conduct Medal, National Defense Medal, Army Service Ribbon, Master Driver Badge, Air Assault Badge, Aviator Wings.

PROFESSIONAL ORGANIZATIONS

ASNT (American Society of Nondestructive Testing)

Free and Accepted Masons

PQNDT

(References and evidence of all certifications, qualifications, and experience available upon request)

Contact this candidate