Curriculum Vitae

Ken Ivan T. Dalida

Mobile: +639*********

Email: acvepu@r.postjobfree.com

Career Objective

I am looking for a good position in the field of offshore survey, instruments and automation in a prestigious company where previous skills and capabilities can be put to efficient use. I possess effective communication and organizational skills to bring out the best for the company. Personal Details

Profile: Male, 25, Single, Filipino

Current Position: ROV Pilot/Technician Instructor

Current Location: Manila, Philippines

Summary of Skills:

About 1 years of experience as an ROV Pilot/ Technician Instructor at Subnet Services Ltd. teaching underwater ROV piloting and maintenance to multi-cultural people entering the ROV industry. Conduct mobilization, preventive maintenance and pre-/ post-dive checks on the system, as well as, maintenance, repair and component-level troubleshooting of the 3 ROV systems: Seabotix LBV150, Sub-Atlantic Navajo, and Seaeye Tiger.

Conducts Seabed Surveys using ROV’s equipped with CCD and SIT camera, Tritech Sonar, 3 and 4 function manipulator, depth sensors and gyro compass.

ROV Instructror for Work-class ROV Simulator using SEAEYE PANTHER.

Conducts Root-Cause Analysis on equipment failures and JSA on every work operation.

About half a year of experience as an electrical and instrumentation Junior Supervisor in detailed maintenance, commissioning and development co-ordination of instruments and control systems in Coal Power Plant, H2S Gas Generator Plant, High-Pressure Acid Leaching Plant, Desalination Plant and Mixing Plant projects.

Configuring and faults diagnosis of DCS, PLC, RTU, Profibus Communication, Analyzers and Control Loops.

o DCS : Centum CS3000 Yokogawa

o PLC : Siemens simatic S7 200,300,400, RSlogix 5000 and Rslogix 500 (Allen-Bradley), GXdeveloper (Mitsubishi) PLC Software

Installation, calibration and loop checking of the field instruments (Emerson Rosemount, ABB, Endress & Hauser, Honeywell, Yokogawa, Wika, Outotec

Maintenance and calibration of the control valves ( Pneumatic, Part turn, MOV, NRV ) of Weir Blackborough, Flowserv, Bray, Airtorque, Copes-Vulcan, Valtek, Masoneilan, Auma matic

Experienced in flowmeters configuring (electromagnetic, orifice plate, ultrasonic, turbine, variable area) of ABB, Rosemount, Krohne,+GF

Review of control philosophy, P&I diagrams, cause & effect diagrams, instruments list, flow chart

Familiar with engineering standards ISA, IEEE, ASTM, NAMUR, ASMI, ANSI, NEMA, IEC

Preparing Point of Maintenance documents for PM; ensuring safe and efficient performing of CM

Technical Support for the instrumentation team.

Experienced in the field instruments and control systems procurement activities

Spares balance investigation and inventory control for all instruments’ spare parts

Excellent communication interpersonal skills.

About 1 years of experience as College Instructor at Palawan State University and Palawan Polytechnic College Institute teaching Major subjects in Electrical engineering (Power Systems, Control and Instrumentation,…) as well as basic subjects (AC/DC Circuits, Statistics, Physics, Calculus, Advance Math,…) to electrical,maritime and petroleum engineering students. Educational Qualifications:

2007……. Bachelor of Science in Electrical Engineering, Palawan State University Philippines 2014……. Masters of Engineering in Electrical Engineering (incomplete), MAPUA Philippines Organizational Experience

Organization: Subnet Services Ltd. (ISO 9001) – Subic, Philippines Duration: Jan 2015 to present

Designation: ROV Pilot/ Technician Instructor

Project Description: Seabed Survey and Underwater Intervention using Seabotix LBV150, Sub- Atlantic Navajo, and Seaeye Tiger 853 ROV systems, as well as, Launch and Recovery System Operations on deck.

Responsibilities:

Working with a team of four ROV Pilot/ Technicians on survey operations and maintenance.

Reporting periodically to Technical Training Manager; preparing Troubleshooting, CPAR, Inventory, Incident Reports and Preventive Maintenance Reports for ISO 9001 Audits.

Troubleshooting of communication loss on system Telemetry boards on Surface Control Unit.

Troubleshooting of RS232/ RS485 communication loss on Tritech Sonar software and hardware through media converters inside ROV.

Troubleshooting of 8 Switched-mode Power Supplies (MVP, Astec) of different cases for no output voltage by component-level repair.

Planning required for each dive preparation on seabed survey operations.

Maintenance and calibration of vacuum sensors, gyro compass, video camera tilt, 3-function manipulator (electrical) and 4-function manipulator (hydraulics).

Oil change on Launch and Recovery System, hydraulic valve pack, and DC brushless motors.

Conduct Orientation on Basic Offshore Safety, IMCA Guidelines, ROV Work-Class Simulator, and ROV system operations, controls, dives and navigation.

Ensure Spares balance and inventory control for all instruments’ spare parts

* * * * * * * * * * * * * * * * * * *

Organization: Palawan State University – Palawan, Philippines Duration: June 2014 – November 2014

Designation: College Instructor

Responsibilities:

Instructor teaching minor and major subjects to Electrical and Petroleum Engineering students from Advance Power System, Control and Instrumentation, Fluid Mechanics, Probability and Statistics, and Integral Calculus based from Theory and Intermediate applications.

* * * * * * * * * * * * * * * * * * *

Organization: Coral Bay Nickel Corporation (ISO 9001/ 14001) – Palawan, Philippines Duration: November 2013 to April 2014

Designation: Electrical and Instrumentation Junior Supervisor Project Description: Nickel Hydro-metallurgical Processing Plant including Coal Power Plant, H2S Gas Generators, High Pressure Acid Leaching Plant; automated by PLC- SCADA system. Management Responsibilities and Leadership Skills: a.) Creates Job Orders through Production Department notifications, preparing and scheduling JGC Maintenance crew manpower during scheduled and unscheduled works.

b.) Coordinate with DCS during inspection, calibration, and troubleshooting activities. c.) Conducts presentations, revise SOP’s, create point of maintenance manuals, technical reports, and documentation of each projects daily activities through filling of necessary forms for ISO documentation audits.

d.) Reports to Japanese Heads and Filipino Immediate Supervisor every end of the day. e.) Implements safety precautions and inspections during supervisory and hands-on fieldwork.

f.) Reads and interprets PFD’s and PNID’s during planning. Technical Responsibilities and Work Summary:

Have acquired background intermediate troubleshooting and calibration on the following instruments:

Pressure: Differential Pressure Transmitter (Yokogawa), Pressure Gauges (Wika). Level: Ultrasonic-type and Microwave-type Level Transmitters, Glass Level Gauges. Flow: Electromagnetic-type, Ultrasonic-type, Coriolis-type, and Orifice-type Flow Transmitters, Flow meters, Flow Indicators.

Temperature: Temperature-element Gauges, RTD, Thermocouple, Temperature Transmitters (Rosemount).

Analyzers: H2S Gas Analyzer (Galvanic Applied Science 902 and 903 model), CO and CO2 Gas detectors (Honeywell, toxic sensor), O2 Analyzer(ABB), H2S detectors(Honeywell), Stack Gas Analyzer (ABB AO2000), pH probe sensors (TOA DKK, Rosemount, Yokogawa), Conductivity, Opacity, Density(Ohmart), Chlorine(Rosemount) Analyzers and Sampling Handling Systems. Utilizes HART 375 Field Communicator, Fluke Multimeters 179, 789 Process Meter series, Druck DPI 610/615 (portable pressure calibrator). Monthly inspection of electric motors using vibration meter, thermometer gun, sound scope, as well as, function testing of cranes (DeMag) and CCTV’s. Weekly monitoring of power consumption at MCC’s and VSD Fan Condition. Daily calibration of ORP & pH sensors, H2S gas detectors, and Stack Gas analyzer, as well as, flowmeter calibrations through HART and masking of echo curves in ultrasonic level meters.

Daily monitoring of Stack Gas analyzers, H2S Gas analyzers, and Critical valves. Conducts valve stroking, re-tubing, Megger (IR) test and winding resistance test, solo run test of motor, clean up and function testing of vibration-type fork level switches in polishing filters (Larox).

Troubleshooting of Fieldbus System like Bus extensions, DI/DO, and AI/AO Modules in Pressure Filter (Larox) Control panel.

Calibrated belt conveyor system and weighing scale for final MS Products of CBNC using test weights and load sensor inspection.

Inspection of critical pneumatic and hydraulic valves by checking pressure readings, limit switches orientation, stem leaks and gaps of actuator assembly parts. Replacement of belt sway switch, zero speed switch, key guard switch, pull cord switch, as well as, configuration of Torque Displays in Thickener Field Control Panels. Background in motor defects, soft-starters, drives, star/delta starters, VFD, MCC. Troubleshooting of PLC system (Siemens simatic S7 300 ) and faults diagnosis Calibration of Radioactive-type Density meters and Level switches using Geiger counters and HART Protocol.

Installation of new models of instrument sensors and transmitters for Plant improvement and commissioning.

* * * * * * * * * * * * * * * * * * * * * *

Organization: Softlink Technical Services – Palawan, Philippines Duration: April 2013 – September 2013

Designation: Reviewer Class Instructor

Responsibilities:

Instructor for Review Class offered, teaching major and minor subjects in Electrical, ESAS, and Math subjects to B.S. Electrical Engineering graduate students preparing for the Board Examination. Handled Board Exam Topics namely: College Algebra, Trigonometry, Analytic Geometry, Differential Calculus, Integral Calculus, Differential Equation and Advance Math in Math Subject. Chemistry, Physics, Engineering Mechanics, Fluid Mechanics, Engineering Management. AC and DC Circuits, AC and DC Machinery, Machine Foundation, PEC, EE Laws.

* * * * * * * * * * * * * * * * * * * * * *

Organization: Palawan Polytechnic College Institute – Palawan, Philippines Duration: October 2012 – October 2013

Designation: College Instructor

Responsibilities:

Instructor teaching minor subjects to Marine Engineering Students from College Algebra, AC & DC Machinery, Electronics 1 and Electronics 2.

* * * * * * * * * * * * * * * * * * * * * *

Organization: Palawan State University – Palawan, Philippines Duration: October 2012 – April 2013

Designation: College Instructor

Responsibilities:

Instructor teaching minor and major subjects to Electrical and Petroleum Engineering students from Advance Power System, Control and Instrumentation, Fluid Mechanics, Probability and Statistics, and Integral Calculus based from Theory and Intermediate applications.

* * * * * * * * * * * * * * * * * * * * * *

Training

Certified Fiber Optic Technician training at MFI by Subnet Services Ltd January 2015

Hydraulics and High Voltage course at MFI by Subnet Services Ltd January 2015

ROV Pilot/ Technician Grade 2 at IDESS Maritime by Subnet Services Ltd May 2015

On-the-Job Training at NAPOCOR Palawan (200Hrs) as Team Leader of co-OJT trainees for Substation, Workshop, Office and Transmission Line Field Assignment April 2011

TESDA 2D Animation NC2 Program (840hrs) at STI, PPC, Palawan June 2010

TESDA Electrical Installation and Maintenance (EIM) - Building Wiring and Installation NC2 Program November 2012

TESDA Computer-Based English Proficiency (Call Center Training) NC2 (100hrs)…March 2013 IT Skills

Operating systems : Windows XP, 7,Basic, Ultimate

Programs : Office Tools, AutoCAD 2010, Google Sketch Up, Adobe Framemaker 9, Adobe Flash CS3 Professional, Adobe Photoshop CS3 Professional, Windows Live Movie Maker, Debut Video Capture Software, Maple Version 18 Simulation Software, EKTS, FESTO.

Internet : Very good

Programming languages : C++

PLC Programming : Ladder Diagram

Control Programs : PCS7 v6.0 Siemens

PC Networking : Very good

OEM Softwares used : RSlogix 5000 and Rslogix 500 (Allen-Bradley) PLC Software GXdeveloper (Mitsubishi) PLC Software, InTouch Wonderware and RTC Editor (DCS Software), PACTWARE Software (microwave- type level transmitter software program), OHMVIEW Software

(Radioactive-type level switch and density meter software), Pro III

(PROFACE Touch panel software program), 903m (Galvanic Applied science H2S Gas Analyzer software program), SOPAS (Opacity software program), Tritech Micron Sonar.

Languages

English: Fluent; read, write and speak

Filipino: Mother tongue

Availability

Earliest start date: Given 3 weeks notice

References

Engr.Emmanuel Mendez, Pre-commissioning Engineer (Singapore, Oil and Gas) Baker Hughes Process and Pipeline (BHPPS), Phone: +639********* Engr. Romil S. Buyco, Electrical and Instrumentation Senior Supervisor/ E&I Maintenance Department Head (Coral Bay Nickel Corporation, Hydrometallurgical Processing Plant using HPAL Technology), Phone: +639*********

Engr. Alex M. Pedrosa, Palawan Electric Cooperative, Inc. (PALECO) REE/M.S./MSH Division Chief, Phone: +639*********/ +639********* Mrs. Prescilla Acero, Fiber Optics Instructor (Subnet services Ltd.) FOA Certified, FTTH and CFOT.

Phone: +639*********

Mr. Dinesh Thangaraj, Superintendent, Keppel FELS Ltd. ROV Pilot, Subnet Services Ltd.

Phone: +659*******

Declaration

I hereby declare that all information stated above are true to the best of my knowledge.

(Last Updated on May 2016)

Contact this candidate