Jaime A. Erazo

Sr. Structural Design Engineer

U.S. Citizen

Cell 520-***-****

Email address acvdgj@r.postjobfree.com

Tucson, AZ

EDUCATION

Bachelor's Degree, Civil Engineering, University of El Salvador, 1980

Summary:

Over thirty years of diversified experience in heavy structural steel and

reinforced concrete for Petrochemical, Oil & Gas refinery, Mining, Cement Plants,

Heavy industrial buildings design, LNG Plants Terminals, Coal plants, well-head

gas facilities, truck loading terminals, Chemical Plants Domestic and international

experience. Proficient with STAAD-Pro, RISA 3D, Enercalc, Smart Plan View Software

and other office software products.

Familiarity

ASCE 7-05 and International Building Code.

Experience:

SAI Engineering - Sr. Structural Design Engineer

Edmond, OK

Design Commercial Buildings Wood and Light gage Structures

IHI E&C International Corp. - Sr. Structural Design Engineer

2014 - 2015

Dominion Cove Point LNG Liquefaction Expansion – Terminal EPC Project, Maryland &

Houston Tx

Design Steel Buildings and Concrete Foundations, Ships Dock, Pipe racks

Check calculations and drawings

Field Work

Technip Houston – Sr. Structural Design Engineer

Nova Chemicals Gas Phase R3 Project – Alberta & Houston

Check Calculations and Design of the Pelletizer Building

Design elevated Concrete deck floors

Equipment foundation design.

2014

Jacobs Minerals Inc – Sr. Structural Design Engineer

2009 - 2013

Magnetation Iron Ore Pelletizing Facilitiy – Reynolds, Indiana

Additive Grinding Building Design - Structural Steel and concrete Foundation

Freeport-MMoRan Copper & Gold-Metcalf Expansion – Morenci, Arizona

Cyclone 713-CYC-3380 Structural Steel and Foundation Design

Cu Regrind Mill No1 713-BGM-3350/ 3360 Foundation Design and Steel Platforms

Cu Columns Scavangers 713-FOC-3451 thru 3455 Steel supports and Foundation Design

Cu Cleaner Flotation Columns 713-FOC-3501 to 3504 Foundation and Platform Design

Rio Tinto Kennecott Utah Copper, Molybdenum Autoclave

Area 3011 Filter Building Design, steel frame and concrete foundation

Main Piperack 2000 ft long x 50 ft high x 15 ft wide Foundation Design

Conveyors Support Design

36” Cooling water pipe Steel support and foundation Design

Pumps Houses Design and Pumps foundation design

Secondary Piperacks over the entire Plant Steel and Concrete Design

Ventilators Roof access Platforms Design

Coordinate work with other disciplines

Mineral Peru Copper Toromocho Project – 1838 t/d copper and 25.7 td molybdenum oxide facility

Structural design of the Filter Building steel and concrete foundation Including the agitated

Filter Feed Tank foundation.

Tailings Thickeners Tanks Foundation Design

Copper Concentrate Thickener Tank Foundation Design

Cleaners Flotation cells

Steel support structure and Foundation design

Steel Mill Balls Receiving Foundation Design

Unloading area Bridge Crane Steel Support and Foundation design

Fluor – Sr. Structural Design Engineer

2008-2009

OAO Tatneft and OJC Taneco - Grassroots Refinery and Petrochemical Complex –

Sugar Land TX

Provide project structural services for a refinery/petrochemical complex as well

as work coordination with soil report investigation, prepare work load for engineers

and designers.

Feed Piperacks Design, Steel and Concrete foundations with precast piles using

RISA 3-D structural software.

Estimate Material Take off Sulphur Block - check Design calculations from ND

Office and coordinate work with them Sulphur Block - check structural drawings - steel

connections and foundations from ND Office

Texas Gasification Project – TX Energy - Beaumont, TX

Front-end engineering and design (FEED) and EPC for a gasification project

Prepare Structural engineering Sketches for estimate Quantities, perform preliminary

Calculations for foundation design, precast piles estimate for pumps, Boiler, Electrical

Buildings,Transformers, Water Sumps, Cable trays supports, Flare stack, Pipe Supports,

Cooling Water, Clarifier Tank, Water tanks, Super-Heater structure.

Aker Kvaerner – Civil/Structural Engineer Houston Texas

2007-2008

Responsible for structural design of piperacks, piles, pile caps foundations,

steel design grade beams using Staad Prosoftware. Also responsible for modeling

and design industrial metal buildings and foundations, coordinate work with other disciplines.

Perform wind load analysis on piping and structures, LNG concrete Piperacks Design.

Responsible for checking steel fabrication drawings for buildings, platforms

Service & Technology Corp. - Senior Civil/Structural Design Engineer Bartlesville,

Oklahoma

2001-2007

Responsible for preparing engineering man-hours estimates for new proposals, this

includes field work, design, cad drafting, the number drawings, coordination with soil engineer and

all disciplines.

Prepare field engineering structural sketches, taking measurements and shot

elevations, Use STAAD Pro structural computer software for 3D design analysis and

ENERCALC structural computer software for windows.

Performed wind and seismic analysis on structures, coordinate CAD drafting with the designers,

Squad checks coordinate work with piping, mechanical, electrical, soil engineer and project engineers.

Design reinforced concrete and heavy or light structural steel structures, prepare own structural design

sketches before going to Cad and coordinate work with the steel fabricator. Participate in

meetings with clients and coordinate work with clients.

Partial Project List: The following is a selection of some the work undertaken.

Valero energy, Ardmore, OK

Seifer Building Foundation Design. SBS Storage Building Foundation design. Power

Distribution Building Design

PDB-1. (Foundation Design, Wind and Seismic load analysis, coordinate with soil

engineer the work). V-8803

Horizontal Vessel Foundation design (operating weight 109,211 lbs). Structural

Analysis and Inspection of the existing Concrete reactor Table top for the NHT Unit.

Scrubber Skid Steel Frame Design and foundation.

New WWTP Metering House Structural Design. New Alky Change Room Building Structural

Design. Unit 500-520

Existing Piperack 800-A Structural Analysis and Evaluation. Unit 800 Control

Building - Existing retaining Wall

Structural Analysis. Crude Unit 100 - Existing Piperack Structural Analysis and

evaluation. 150 Tons of structural

Steel addition for cable tray support.

Coffeyville Resources Refinery and Marketing, Coffeyville, KS

New sub-Station #2 Building, including Transformer and firewall Foundation design.

Three Walk-Steel Bridges

Design (46 ft. long each). New FCC Blower Installation - Steel Frame Structure

Modelina and Analysis. Existing

Coker Bridge Crane Structure - 3D model - Analysis and Evaluation.

Koch Nitrogen, Beatrice, NB

New 108-D Zinc Oxide Vertical vessel – Steel Frame Support and Foundation Design.

(Dry weight 52,000 lbs

operating weight 140,000 lbs). (Dry weight 123,000 lbs operating weight 526,092

lbs). 123-C Exchanger

Replacement – Foundation Design. (Dry weight 105,000 lbs operating weight

147,000lbs).

ConocoPhillips, Borger, TX

Column 43 Overhead Accumulator – Structural Analysis – Design Steel-Concrete

Support. (Empty weight 84,000lbs operating weight 239,000lbs). Existing Gold Lines

New pipe Supports including drainage Junction Boxes, grading, and steel Pipe supports design.

Existing piperacks – Steel Modifications. LaFarge Cement Plant, Tulsa, OK

Limestone Addition to Kilns – New Steel silo Steel Frame Support Analysis – Design.

(Modeling 3D of the steel frame the weight of the silo + product = one million lbs).

New Dust Collector Support – Steel Frame and foundation design. Cut openings in existing

wall silos – Structural Design.

Syntroleum-New Slurry Pilot Plant, Tulsa, OK

Steel and Concrete Design for Air-Coolers-skid compressors, Cooling Tower skid,

Boiler Building, Steam drumskid, New Piperacks design, New reactor Tower.

Coordinate the work with the all disciplines, soil engineer, and survey.

Bravo Energy, California

Oil Dewatering Equipment Project for Argentina in South American – Steel frames

modules design. Oil Dewatering Equipment Project for Chile in South America

Steel frames modules design.

Benham Companies - Civil/Structural Design Engineer - Tulsa, OK

1996 - 2000

Riceland Foods, Inc. - Jonesboro, Stuttgart, Arkansas

Boiler foundation and Steel Platform Design. New Reactor Foundation Design.

New Cooling Tower foundation Design. New combustion tube foundation design.

New piperacks-steel and concrete design. Steel support design for heavy-duty ducts.

Allco Chemicals - Pittsburg, Kansas

New process building, 3D modeling of the steel frame that support two reactors and several

exchangers, including the foundation design, coordinate work with all disciplines and field work.

North Americas, Inc., Pryor, OK

Dryer Replacement, includes new dryer Foundation design, Steel frame support

modeling analysis, new pipe bridge steel design including foundations, coordinate work with

all disciplines and field work. SAC (Storage Building, responsible for the foundation design of the new metal frame building (170 ft long X 60 ft wide) coordinate work with soil engineer and the client.

Dyneon-3M, Decatur, AL

New building 061 part of the engineering team to perform the structural design

including steel frames and

foundations for this new industrial building which the dimension are 200 ft X 300

ft X 40 ft high.

Vulcan Chemicals, Wichita, KA

900 Tons Condenser Replacement Project. Performed the structural design to install

a new condenser inside the existing refrigerant building, mist eliminator tank. Performed the

structural analysis to determine if the existing steel structure will support the new eliminator tank

with a specific gravity liquid of 1, 3. Lifting devices rating. Performed the structural analysis.

Farmland Industries, Coffeyville, KA

Amine Unit #2 Relocation. Performed the civil-structural design for the following:

VO-430 horizontal vessel foundation, amine stripper tower TO-122 foundation design,

Amine contactor tower TO-121 foundation design, several exchangers foundation,

new piperack steel design and foundations, create a 3D model of the existing Amine

#2 unit steel frame.

Alky Feed Treated Project, responsible for the following: VO-463 Horizontal easel

Foundation Design (220,000 lbs weight), several Heater-Exchangers Foundation design,

5 new process Skids Steel Frame design and foundations.

AGC Technical Services, Inc. - Civil/Structural Engineer - Broken Arrow, OK

1995 - 1996

Responsible for civil-structural installation of the MCU unites (Mobil Cogeneration

Unit 200,000 labs. Weight) on several locations in the USA and also in Mexico, Colombia,

and Dominican Republic.

EDECO Engineers - Civil/Structural Engineer - Tulsa, OK

1990 - 1994

Responsible for Conoco Refinery. Flare line replacement. Foundation design for the

new 225 ft tall flare and steel pipe supports. Fuel Gas Mine treatment system, performed

the structural design for several heater-exchangers and pump foundations.

Chevron, Hilo, HA. Truck Loading Terminal – Responsible for the new metal building

foundation design and specifications. New concrete paving, new piperack steel and

foundation design.

Arco Pipeline, Houston, TX. Houston Galena Park Station. Performed the structural design

for 300,000bbl tank (210ft dia. X 51 ft high). Ring wall foundation and for an 80,000bbl tank.

Clients:

Phillips petroleum, Augusta, NC, and Selma, NC.

Truck Loading Terminal. Responsible for the structural design of the new Metal Canopy Building

Foundation.

Fluor - Structural Design Engineer

1988 - 1989

Amoco Oil Company Revamp of Ultraformer Unit #2 Texas City, Texas, United States

Conversion of an idle ultraformer unit to a 15,000-BPD aromatics unit

Dock lines pipe supports replacement. Assisted in the structural design of 450

large pipe supports, including pipebridges, steel and foundations design. Coordinate work with soil engineer and the survey company.

Georgia A. Wilson & Associates - Civil/Structural Engineer - Houston, TX

1984 - 1987

Assisted in the inspection of 300 bridges for BRINSAP program on Texas Highway.

Houston TX Public Work Department Storm Sewer Design for Subdivisions, perform

Hydraulic analysis for culverts under freeways. Sometimes ink drafting plan and profiles, Coordinates work with survey.

Palomar Engineering - Civil/Structural Engineer - Houston, TX

1981 - 1984

Design concrete and steel structures for the well-head gas industry, projects site

was in Louisiana

Including piperacks, heat exchangers, stacks, pumps, skids, vertical vessels .

Perform engineering design and drafting

LANGUAGES; Fluent in speaking, reading and writing both English and Spanish

ORGANIZATIONS; American Concrete Institute ACI

American Institute of Steel Construction AISC

Seminars;

Soil Mechanics, Hilti Bolts, Pile Foundation - Edeco Engineers - Tulsa Oklahoma

Design of Storm Sewer Systems - Georgia Wilson - Houston, Texas

Steel Shop Fabrication – STC - Bartlesville, Oklahoma

Staad Pro – Risa 3D - Benham Group - Oklahoma City, Oklahoma

Safety Training

Oil & Gas Refinery * Chemical Plants * Cement Plants * 3M Plants * Food Processing

Contact this candidate