JOHNDE EITO CALIBA
Purok *, Masville brgy BF Homes
Parañaque City 1700, Philippines
Mobile No.: +639*********
Email Add: acuz6v@r.postjobfree.com
OBJECTIVES:
To accept any challenging position, that would fully develop and enhance my ability, knowledge and requirements to meet quality service for the company and to improve my interpersonal communication skills.
CORE OF QUALIFICATION
Experience working in the Electrical Building Industrial Installation.
Experience in Cable layout and Cable pulling.
Knowledge in Electrical Troubleshooting and Programmable Logic Circuit
Knowledge how to read and interpret the Electrical Plan and Schematic Diagram
Knowledge motor rewinding and basic electronic Troubleshooting.
Knowledge to design of step down Transformer for High and Low voltage
Experience working in different plant (Cement Plant, Power Plant, Mining and Sugar Plant) regarding electrical installation and Conveyor Belt Maintenance.
Knowledge in installation of Air Cannon and Pneumatic Solenoid Valve
Knowledge to operate different Conveyor Belt Vulcanizing equipment (Almex, BeltWin)
Sound ability to work on multiple projects independently
Fast learner and highly motivated in learning new skills.
Safety Oriented regarding Mechanical and Electrical Works.
WORK EXPERIENCE:
Position: Conveyor Belt Specialist
Safety Officer
Duration: September 03, 2015 to Present
Company: NTPI International, Inc.
Company Industries: Supplier of bulk handling materials, Power transmission product and telecommunication hardware
Location: Mandaluyong City / Trece Martirez Cavite
Job Description:
Leads personnel as needed for the Conveyor Belt Maintenance ( Splicing and vulcanizing )
Trains / demonstrate to personnel how to operate vulcanizing equipment.
Operate Conveyor Belt vulcanizer, Super Spotter and Pro series Equipment
Assists the Foreman and/or the Splicer in the preparation and hauling of equipment, tools and materials to the job site
Performs stringing and layout of ropes for conveyor belt stringing/installation
Performs preparation and installation of working table and vulcanizing equipment and accessories
Performs layout and cutting/splicing of conveyor belts
Performs cleaning and application of cement and rubber on the conveyor belt for joint/vulcanizing
Removes existing worn-out rubber/ceramic lagging or rubber/ceramic lining
Applies necessary chemicals and materials when necessary
Performs electrical works such as tapping and installation of wire for vulcanizing and its supply
Performs proper housekeeping or cleaning at work areas after splicing/vulcanizing activity
Repairs minor troubleshooting for Belt vulcanizer heating plate and control box
Performs other related tasks as assigned
Coordinate / turnover when the splicing vulcanizing is done
Attend special task needed by Belt installation
Secure all the accessories removes on conveyor are back in a good position to help the proper rotation of the belt
Install Conveying system parts as needed by the customer ( Belt Cleaner, Impact Bar, Air Cannon, Etc. ) needed by the system
Available to work shift or weekends as part of normal rotation.
Follow SOP of conveyor belt vulcanizing
Perform preventive maintenance and repairs to the coal handling and conveying equipment
Starts and operates belt conveyors, elevator conveyors, magnetic separator and pan feeder conveyor in sequence of local controls on each individual piece of equipment and/or panel board controls
Continuously monitor and inspect conveyor belt before and during operations to assure that the belt has no damage or for repair and prevent spill over of coal inside plant.
Act as Safety Officer if needed in the project
Maintain accurate daily records for inspection
Coordinate work activities with other trades and subcontractors
Safety Oriented regarding Electrical Works.
Enforces safety regulations, rules, and working conditions.
Direct reporting to Plant Manager / Project Manager
Prepare daily project progress report and Man-hour for Safety.
Position: Electrical Team Leader
Safety Officer
Technical Staff
Belt Splicer / Rubber Technician
Driver
Duration: January 27, 2015 – July 21, 2015
Company: F17 Construction Corporation
Company Industries: Civil, Mechanical and Rubber Works Contractor
Location: Makati City / Antipolo
Job Description:
Leads and controls Electricians engaged in all activities concerned with the civil building works.
Ability to optimize resources (manpower, equipment and materials) to ensure efficient and timely completion of the works. Able to demonstrate good organizational skills, following policies, procedures and work practices.
Ability to read, interpret and follow method statements and procedures, specifications, drawings, and all other discipline related project and engineering documentation.
Conduct Daily monitoring / inventory of Materials for project.
Plan and schedule work for Lead Hands and crew ensuring proper distribution and tasks and all tools and material required to carry out the tasks assigned.
Commands respect of workforce, and develop excellent working relationships with all other department personnel.
Give instructions in an efficient and effective way to the workforce.
Liaises with other discipline foremen to ensure the optimum utilization of available work, with the overall objective of successful completion of the project.
Assists the civil supervisor in the coordination and performance or related activities such as setting out, preparation of lines, cabling works, fixing electrical equipments and fittings, testing etc.
Ensures that work crews are properly supplied with tools, equipment and materials. Prevents wastage and misuse of equipment, materials and tools.
Supervises work crews to best utilize manpower and materials, exercises discipline at the work site to prevent absenteeism, unsafe work practices and idleness.
Safety Oriented regarding Electrical Works.
Enforces safety regulations, rules, and working conditions.
Direct reporting to Electrical Engineer and General Manager
Prepare daily project progress report and Man-hour for Safety.
Act as Driver if needed in the project
Attend special task when needed in the project for rubber works
Position: Safety Officer 2
Admin Assistant
Duration: June 01, 2014 – January 15, 2015
Company: Beta Equipment Sales Corporation
Company Industries: Supplier of Bulk Handling Materials
Location: Norzagaray Bulacan
Job Description:
Ensures that all satellite employees abide by the rules and disciplines based on the Company’s Code of Conduct
Update all satellite employees on new information and policies
Assist field foreman /Safety Inspector in conducting Job hazard analysis or risk assessment of the job/task
Ensures cleanliness of satellite office and maintenance of all office equipment
Ensures that funds for mobilization and the revolving funds are readily available
Prepare DTR report for submission to the HO for payroll processing
Coordinates with the HO finance and admin regarding new policies and announcement and cascades it below
Ensures that all standard operating procedures of company are being followed
Assure that all activities within the branch are captured with the use of JR and JO
Also assure that all activities outside are properly monitored with the evidence of WR, SR coming from HO
Perform other related task as assigned
Conducts accident/incident investigation and reporting
Monitor PPE’s service life and consumption
Conduct fire extinguisher and first-aid kit Monthly inspection
Prepare Safety and Health topic for Monthly Toolbox meeting
Monitor / Inspection of Tools and Equipment for Preventive Maintenance Every quarter
Secure the availability of Manpower for proper mobilization
Assist Area Sales Representative to prepare product presentation for the client
Secure the availability of the stock item for delivery Trade and Materials for clients.
Responsible in reporting system on what happen in the Site every week.
Monitor / prepare Sales Summary and Sales invoice for billing
Secure Splicer / Welder foreman for proper installation of Martin Product and Splicing Vulcanizing ensure that they follow SOP
Position: Field Supervisor
Admin Officer
Safety Officer 2
Electrical Technician
Duration: April 12, 2012 – May 30, 2014
Company: Beta Equipment Sales Corporation
Company Industries: Supplier of Bulk Handling Materials
Location: Naga City, Cebu
Job Description:
Ensures that all satellite employees abide by the rules and disciplines based on the Company’s Code of Conduct
Update all satellite employees on new information and policies
Assist field foreman /Safety Inspector in conducting Job hazard analysis or risk assessment of the job/task
Coordinate with Electrical Engineer or Direct Supervisor to determine manpower requirements.
Create, maintain and execute the project plan and schedule and ensures compliance with budget.
Create site specific plans and procedures; ensures the implementation of Safety Program to create a safe work environment throughout the jobsite.
Interpret and work from electrical drawings, schematics and wiring diagrams.
Prepare planning and sequencing of installation schedules and provides input for quantity tracking.
Ensure project materials and workmanship meets the project Quality Standards and Design requirements.
Advises senior management of potential problems, work interferences or schedule difficulties while assisting in circumventing/resolving such conflicts; anticipate and resolve project issues and schedule difficulties.
Repairs minor troubleshooting for Shaw Almex Vulcanizer heating plate and control box
Performs other related tasks as assigned
Performs electrical works such as tapping and installation of wire for vulcanizing and its supply
Coordinate work activities with other trades and subcontractors
Safety Oriented regarding Electrical Works.
Enforces safety regulations, rules, and working conditions.
Direct reporting to Electrical Engineer
Prepare daily project progress report and Man-hour for Safety.
Position: Safety Officer 1
Conveyor Belt Splicer
Duration: September 01, 2009 to April 11, 2012
Company: Beta Equipment Sales Corporation
Company Industries: Supplier of Bulk Handling Materials
Location: Norzagaray Bulacan
Job Description:
Prepares / Institute annual safety and health program for the company in accordance with the guidelines prescribed for this purposes
Prepares Safety and Health Requirement of client/customer (process and seek approval of safety and health documents and work permit
Assist field foreman /Project in-charge in conducting Job hazard analysis or risk assessment of the job/task
Prepares and process approval for the completed WR for the required attachment for billing (WO, COC, MO, etc.)
Conduct safety orientation to new employee/s
Conducts safety and health training to personnel
Monitor man hours and prepares report for MGAR (monthly general accident report) submitted MGB/DENR/clients
Enforces safety and health policies of the company/clients
Attend to the Safety and Health orientation of the customer (Client) and strict compliance to their safety and health standard, rules and regulations
Prepares accident/incident prevention program
Conducts accident/incident investigation and reporting
Monitor PPE’s service life and consumption
Conduct fire extinguisher and first-aid kit Monthly inspection and Power tools and equipment quarterly inspection
Prepare Safety and Health topic for Toolbox meeting
Assists the Foreman and/or the Splicer II in the preparation and hauling of equipment, tools and materials to the job site
Performs stringing and layout of ropes for conveyor belt stringing/installation
Performs preparation and installation of working table and vulcanizing equipment and accessories
Performs layout and cutting/splicing of conveyor belts
Performs cleaning and application of cement and rubber on the conveyor belt for joint/vulcanizing
Removes existing worn-out rubber/ceramic lagging or rubber/ceramic lining
Applies necessary chemicals and materials when necessary
Performs electrical works such as tapping and installation of wire for vulcanizing and its supply
Performs proper housekeeping or cleaning at work areas after splicing/vulcanizing activity
Repairs minor troubleshooting for Shaw Almex Vulcanizer heating plate and control box
Performs other related tasks as assigned
Coordinate / turnover when the splicing vulcanizing is done
Secure all the accessories removes on conveyor are back in a good position to help the proper rotation of the belt
Position: General Services Assistant (Maintenance)
Duration: April 28, 2003 to August 31, 2009
Company: Beta Equipment Sales Corporation
Company Industries: Supplier of Bulk Handling Materials
Location: Mandaluyong City
Job Description:
Assign housekeeping maintenance to maintains cleanliness and sanitation of the office
Assist in monitoring maintenance requirements of office units, facilities and equipment
Helps in maintaining records on the upkeep of office unit, facilities and equipment
Monitor monthly pest control for the office and secure work permit
Performs minor repair and maintenance work
Act as assistant property custodian (Head office only)
Attends to registration of company vehicle, renewal of Business permit, Governor’s permit, DOLE permit etc.
Representative to file loan, Maternity, Sickness, R3 Contribution and Loans remittance to Social Security System
Assists in monitoring and processing of request for repair and service of company vehicles
Secure building and car passes for various servicing personnel and company vehicles from Building Administrator
Support Finance Section in the collection process
Representative of Treasury to collect receivables from customers
Performs regular inventory of office and pantry supplies
Purchase certain supplies / Item assign
Issues and distributes office supplies
Attend to others special tasks requested by various section duly noted as authorized by the Administration Office
Position: Junior Electrician
Duration: October 01, 2002 to March 20, 2003
Company: Beta Electric Corporation
Company Industries: Electrical Contractor and Supplier
Location: Brgy. Ususan, taguig City
Job Description:
Assists Senior Electrician in basic residential, commercial and industrial electrical work.
Coordinates Electrical Foreman duties assigned.
installation of Panel board, Transmission, and other electrical devices and install and replace other types of basic electrical components
Install and maintain wiring and lighting systems.
Inspect electrical components, such as transformers and circuit breakers.
Identify electrical problems with a variety of testing devices.
Repair or replace wiring, equipment, or fixtures using hand tools and power tools.
PERSONAL DATA:
Nickname: JEC
Birthday: June 07, 1983
Age: 32
Spouse: Evelyn A. Mila
SSS No. : 33-8030746-2
TIN No. : 223-343-116
Philhealth No.: 19-090147604-0
Pagibig No.: 109*-****-****
EDUCATIONAL ATTAINMENT
Course: Industrial Electrician
School: Meralco Foundation Institute
Location: Pasig City
Date Graduated: April 07, 2004
Course: Building Wiring Electrician
School: Technical Education and Skills Development Authority
Location: Parañaque City
Date Graduated: December 20, 2001
School: Makati High School
Location: Makati City
Date Graduated: March 29, 2001
School: La Paz Elementary School
Location: Makati City
Date Graduated: April 02, 1997
PERMIT/LICENSE
Title: Permanent Safety Inspector
Control No: 120413-R07-2771
Agency: Mines Geosciences Bureau
Department of Environment and Natural Resources
Republic of the Philippines
Title: Temporary Safety Inspector
Control No: TSI-2011-12-03
Agency: Mines Geosciences Bureau
Department of Environment and Natural Resources
Republic of the Philippines
Title: Non Professional Driving License
Control No: N01-05-011725
Land Transportation Office
Republic of the Philippines
SKILLS
Computer Literate: Microsoft Word, Microsoft Excel, Microsoft Power point, Microsoft Access
Knowledgeable in Electrical Troubleshooting, PLC, Transformer and Solenoid Valve, Conveyor Belt Vulcanizer
TRAININGS AND SEMINARS
TRAINING / SEMINAR
DATE
CONDUCTED IN
Forklift Safety Operation and
Maintenace
November 14, 2014
BESC Bulacan Field Office
Operational Planning
September 26-27, 2013
Guthrie Jensen
Safety Program Audit
June 17-21, 2013
Insafety Incorporated
Basic Life Support and first Aid
Jan 21-26, 2013
PNRC Pasig Chapter
Safety Officer’s Training
December 6-7, 2012
Apo Cement Corporation
Craine Hoist Rigging Safety
June 13, 2012
Republic Cement Corporation
Fire Safety Prevention and Education
December 21, 2011
Beta Equipment Sales Corporation
Disaster Risk Management Orientation
November 29, 2011
Republic Cement Corporation
Basic Occupational Safety and Health
September 05 to 09, 2011
Safety Organization of the Philippines Office
Basic Life Support and first Aid
August 15 to 20, 2011
PNRC Pasig Chapter
Control of Hazardous Energy (LOTOTO)
July 19, 2011
Beta Equipment Sales Corporation
Machinery, Equipment and Power tools Safety
July 19, 2011
Beta Equipment Sales Corporation
Fall Protection, Prevention and Ladder Safety Work at Heights (WAH)
July 19, 2011
Beta Equipment Sales Corporation
Training on Cold Splicing & Repair for fabric ply conveyor belts and Rubber Lagging
May 4-6, 2011
Rema Tip Top
TEAM BUILDING SEMINAR
August 28, 2010
Grotto Vista Resort, SJD Bulacan
Speaker Rewinding and Basic Techniques on how to repair Microphone and Remote control
November 26, 2009 to December 18, 2009
Ilano Compound, Paranaque City
Conveyor Belt Splicer Vulcanizing of Fabric Ply Belt
July 7, 2009
Beta Equipment Bulcan Field Office
Splicing Vulcanizing of Fabric Conveyor Belt
July 7, 2009
Beta Equipment Bulcan Field Office
Product Presentation and Demonstration Seminar / Training on Conveyor Belt Maintenance
November 15 - 18, 2007
World Trade Center Metro Manila
Tax Amnesty (RA 9480) Roadshow
November 06, 2007
SM Central Business Park, Pasay City
Basic and Advance Cellphone Repair Techniques
March 16 to 20, 2006
Hermanos Building, Bicutan Interchange Paranaque City
REFERENCES
John Philip Capucion Business Development Manager
NTPI International, Inc.
Mobile No. 091********
Brandon D. Pisan Operations Engineer
Beta Equipment Sales Corporation
Tel No.: (02)7194046 to 47
Email: acuz6v@r.postjobfree.com
Carmelita Santiago Civil Engineer
F17 Construction Corporation Mobile No. 099********
Alfredo A. GalarioJr Conveyor Belt Specialist
Apo Cement Corp
Mobile No. 091********
Ma. Elena A. Manalad Sales Executive
Prime Tech Industrial
Mobile No. 090********
Rogelio L. Sorita Chief Engineer
Star Cement (Lafarge Republic Inc)
I hereby certify that all the information stated above are true and correct to the best of my knowledge.
Johnde E. Caliba