Mohammad Hounarmand

**** ******** ***** *** ***: 7

Mukilteo, WA 98275

Cell: 501-***-****

Home: 425-***-****

acuy01@r.postjobfree.com

Summary of Qualifications

B. S. in Mechanical Engineering and over 14 years experience as a Manufacturing/Quality Engineer and Liaison (MRB) Engineer in a Highly Regulated Industry.

Specializing in Interiors: Large Cabinets such as MDR Galleys, AUX Galleys, Galley annexes, AFT and FWD Lavatories, LH and RH crew closets, Cockpit, Flight Deck, Bins, Sideleges, Mid cabin runs, Seats, Interior, Floor, Attachments, Frames, Wings, Body, Stringers, metallic and/or composite nacelle and exhaust structures, Mechanical, Electrical & Wiring Brackets/Angles/Doublers, fasteners, flammability tests, Liaison, Quality, Customer support, OEM/MRO and other interior installations. U.S Citizen

Technical Skills

Provided technical input for creation and maintenance of Enterprise Resource Planning (ERP) system for product line responsibilities provide technical support to internal organizations.

First Article Inspections (FAI)

Material Review Board (MRB) and Change Review Board (CRB)

Coordinated with the FAA representatives

Extensive knowledge of Microsoft Office (Word, Window, Excel, Power point),

CAD: AutoCAD, Solidworks, Pro/E Catiav4-v5, Unigraphics NX5

SAP, Oracle, IQS, PDM, PLM, Mathcad, Enovia, ERP, MRP

Familiar/experience with continuous improvement, Lean Manufacturing, participation in Kaizen events, 5S, 5Y, Six Sigma methodology.

Familiar with FAA CFR 14 Part 21 and Part 25 requirements.

B. S. in Mechanical Engineering

Work Experience

Quality Engineer II/MRB Panasonic Corp., Bothell, Washington 4/2015 to 8/2015

Administered programs from First Article Inspections (FAI) at Supplier to final Customer FAI. This includes tracking rejections to ensure program is completed and interfacing and supporting QC activities.

Supported and performed Material Review Board (MRB) and Change Review Board (CRB) activities.

My work with Supplier Management group (e.g. quality requirements flow down; supplier assessment; supplier performance monitoring, improvement and/or corrective action, etc.) and assist with other QA function when necessary.

Manufacturing/MRB Engineer Spirit Aerosystems, Tulsa, Oklahoma 9/2014 to 11/2014

With minimal supervision, provided solutions and technical support to Manufacturing Engineering, Liaison (MRB) and vendors for Gulfstream G650 and G280 programs (OEM).

Obtained, interpreted, and analyzed Engineering change request (ECR/EO/DCR/EECN/Revisions) / work order using approved processes and tools.

Working knowledge of various aerospace industry standards.

Supported the Manufacturing department with investigations, Root Cause Analysis, MRB dispositions.

Applied standard techniques involving only minor innovations of methodology to provide solutions to problems involving a limited number of variables.

Supported the internal production line customer with speedy issue resolution.

Reviewed drawings for accuracy & completeness (ASME Y14.5 standards).

Supported the Material Review Board (MRB) to review and investigated non-conforming products. Supported and performed Change Review Board (CRB) activities to review drawings prior to release.

Aided Manufacturing Engineering with Tooling, Production and any other details needed.

Provide root cause analysis for production defects, production improvements, lean manufacturing and identify tooling requirements and improvement.

Experience in Lean Manufacturing, participation in Kaizen events both in the factory and in the office, and proficiency in process improvement techniques and Familiar/experience with continuous improvement and Six Sigma methodology.

Manufacturing/MRB Engineer Raisbeck Engineering, Seattle, Washington Aug/2013 to Sep/2013

Employed as Manufacturing/MRB Engineer at this MRO facility, to support the company's various product lines. Out products are used it enhance various aircraft including Learjet and Hawker Beechcraft King Air models.

Duties include:

Supported the Material Review Board (MRB) to review and investigated non-conforming products. Supported and performed Change Review Board (CRB) activities to review drawings prior to release.

Applied standard techniques involving only minor innovations of methodology to provide solutions to problems involving a limited number of variables.

Liaise with Production for disposition of discrepant parts or erroneous drawings; revise affected drawings using CAD software in a timely manner to minimize impacts to Production.

Worked with QA for rejection tag dispositions, sign off or suggest an alternative method to fix the problem.

Familiar with FAA CFR 14 Part 21 and Part 25 requirements.

Coordinated work with other engineers and operating groups to facilitate participation of various organizational units.

Working knowledge of various aerospace industry standards.

Supported the Manufacturing department with investigations, Root Cause Analysis, MRB dispositions.

Reviewed drawings for accuracy & completeness (ASME Y14.5 standards).

Supported the Material Review Board (MRB) to review and investigated non-conforming products. Supported and performed Change Review Board (CRB) activities to review drawings prior to release.

Manufacturing/(MRB) Engineer Boeing, Everett, Washington 2/23/2011 to 3/1/2013

With minimal supervision, provide solutions and technical support to Manufacturing Engineering, shop floor and vendors for 747-8 program (OEM).

Working knowledge of various aerospace industry standards.

Supported the Material Review Board (MRB) to review and investigated non-conforming products. Supported and performed Change Review Board (CRB) activities to review drawings prior to release.

Evaluation and disposition of vendor’s nonconforming products, Supplier Requested Material Review Board (SRMRB) parts.

Continually improved quality and productivity for products and processes.

Provided training to lower-level Manufacturing Engineers.

Thorough understanding of commercial and VIP aircraft requirements.

Supported the Quality department with investigations, Root Cause Analysis, MRB dispositions.

Supported the internal production line customer with speedy issue resolution.

Reviewed drawings for accuracy & completeness (ASME Y14.5 standards).

Worked closely with stress liaison engineering to provide a solution to production discrepancies.

Aided Manufacturing Engineering with Tooling, Production and any other details needed.

Experienced in Lean Manufacturing, 5S, participation in Kaizen events both in the factory and in the office, and proficiency in process improvement techniques and Familiar/experience with continuous improvement and Six Sigma methodology.

Coordinated work with other engineers and operating groups to facilitate participation of various organizational units.

Manufacturing/Liaison Engineer Executive Aviation/American Eagle, Blytheville, Arkansas 4/16/2010 to 7/28/2010

Duties include, working on first and secondary structures at these MRO facilities. Review and analyze the situation, following the ATR’s (France) SRM manuals.

Experienced in development of aircraft metallic and/or composite nacelle and exhaust structures.

Demonstrated working knowledge of technical understanding of maintenance, repair, overhaul, and regulatory requirements in the commercial aircraft industry.

With minimal supervision, provided Operation-Manufacturing/MRB and technical support to Design Engineering, interior, shop floor and vendors for American Eagle (AA) Aircraft.

Working knowledge of various aerospace industry standards.

Supported the Material Review Board (MRB) to review and investigated non-conforming products. Supported and performed Change Review Board (CRB) activities to review drawings prior to release.

Provided production floor and assembly support in technical matters relating to assembly drawing interpretation, engineering change notices (ECN), rework, manufacturing difficulties and specifications.

Thorough understanding of commercial and VIP requirements.

Supported the Manufacturing department with investigations, Root Cause Analysis, MRB dispositions.

Manufacturing/Liaison Engineer Duncan Aviation, Lincoln, Nebraska 1/4/2010 to 2/15/2010

Duties include, working on ECO’s, Revisions, ECR’s, FES, standards, STC and Mod drawings at these OEM/MRO facilities.

With the minimal supervision provided solutions to Manufacturing and shop, and working on Falcon jet Aircrafts (7X program).

Working knowledge of various aerospace industry standards.

Thorough understanding of commercial and VIP requirements.

Provided production floor and assembly support in technical matters relating to assembly drawing interpretation, engineering change notices (ECN), rework, manufacturing difficulties and specifications.

Updated/modified manufacturing documents and drawings needed to support internal and contractual requirements, leading focus teams as necessary for complex projects/problems.

Supported the Manufacturing department with investigations, Root Cause Analysis, MRB dispositions.

Supported the internal production line customer with speedy issue resolution.

Reviewed drawings for accuracy & completeness (ASME Y14.5 standards).

Provided root cause analysis for production defects, production improvements, lean manufacturing and identify tooling requirements and improvement.

Manufacturing/ Liaison Engineer Dassault Falcon Jet, little Rock, Arkansas

1/3/2000 to 6/5/2009

With the minimal supervision provided solutions to structural and interior issues at these OEM/MRO facilities for Dassault Falcon jet Aircraft. This includes root cause analysis and resolution on Falcon: 50, 900C, 900DX, 900LX, 2000, 2000EX, 2000DX, and 2000LX.

Also as a team leader, assisted with informal training of less experienced engineers.

Working knowledge of various aerospace industry standards.

Thorough understanding of commercial and VIP requirements.

Prepared plans, and procedures, production aids and assembly fixtures, MRP support and standards development, and assignments of similar comprehensive knowledge of mechanical and manufacturing theory and design.

Supported the Manufacturing department with investigations, Root Cause Analysis, MRB dispositions.

Continually improved quality and productivity for products and processes.

Applied standard techniques involving only minor innovations of methodology to provide solutions to problems involving a limited number of variables.

Aided Manufacturing Engineering with Tooling, Production and any other details needed.

Applied basic engineering principles to perform routine design, fabrication, modification and evaluation in support of manufacturing operations.

Supported the internal production line customer with speedy issue resolution.

Assisted in preparing cost estimates, engineering changes, schedules and budgets.

Reviewed drawings for accuracy & completeness (ASME Y14.5 standards).

My work includes the Liaison, Repair, Liaison/Manufacturing, Seats, Interior, Jet center (repair),root cause analysis and resolution, design review and design work including all phases of development and production from proposal through delivery at DFJ in Little Rock, Arkansas.

Familiar with FAA and French regulations criteria and methods and have experience in corporate jets.

Research and developmental engineering of Falcon interiors using CATIA V4 and V5 as specified by customer finishing specifications.

Technical liaison and MRB with outside engineering contractors. Be able to interpret and apply FAR part 25 and CAR part 4b.

Responsible for ensuring structural integrity and weight control of STC and MOD design projects.

Experienced in Lean Manufacturing, participation in Kaizen events both in the factory and in the office, and proficiency in process improvement techniques.

Instructor ITT Technical College, Little Rock, Arkansas 5/12/1996 to 12/17/1999

Employed as a Teacher, to teach Manufacturing, AutoCAD, Math, Physics, Project Management, Design projects, Geometry, and Solid Works. Assisted students in variety of courses.

Manufacturing Engineer Controlled Automation, Boxide, Arkansas 5/25/1995 to 4/28/1996

Employed as a Manufacturing Engineer, for variety of CNC machines.

Acted as a Manufacturing engineer between shop floor and supply chain counterparts.

Supported the Quality department with Corrective Action investigations, Root Cause Analysis, MRB dispositions.

Assisted in preparing cost estimates, engineering changes, schedules and budgets.

Reviewed drawings for accuracy & completeness (ASME Y14.5 standards).

Performed administrative tasks related to role, including reviewing engineering documents (drawings, models, parts lists, etc), and Flammability tests.

With minimal supervision, provided technical support to Manufacturing/ Engineering, shop floor and vendors for Controlled Automation.

Provided root cause analysis for production defects, production improvements, lean manufacturing and identify tooling requirements and improvement.

This also includes, 3DVia and Microsoft Office (Window, Excel, Power point), AutoCAD.

Will be proactive in recommending and developing design improvements which will eliminate repetitive non conformances.

Ensured Engineering stays within design standards.

Provided direction to operations team.

Education:

CATIA V5 Design courses at Everett Community College, Everett, Washington in 2014

B. S. in Mechanical Engineering, University of Arkansas, Little Rock, Arkansas in 1995

Associate degree in general study, University of Arkansas, Little Rock, Arkansas in 1993

Contact this candidate