CURRICULUM VITAE

Name: Dhobale Abhijit

Asawari A 508, Nanded city

Sinhgad Road, Pune-411041

Cell No: 988******* Maharashtra, India

E-mail: acux48@r.postjobfree.com

Objective:

To obtain a challenging position in the field of Subsea engineering that will offer opportunity to apply my knowledge and skills and gain expertise in the field. I have interpersonal skills, good work ethic and the ability to work well in a team or individual environment.

Summary:

Completed B.E. (Mech.) with First class from Pune University. Total Experience of 7 years in Design (Subsea Manifold- Designing Deep water & Template base, Bearing Design, welding Fixture)

Manifold: - A Manifold is a system of headers, branched piping and valves used to gather produced fluids

or to distribute inject fluids. The manifold should provide sufficient piping, valves and flow

Controls safely gather produced fluids. Manifold include connection points for tie-in of the

Flow line as well as connection points for the individual production wells.

Template: - Template is a frame work that supports other equipment such as manifolds, riser, drilling and

Completion equipment. The template should provide foundation to sufficiently transfer design

Loads into the seabed. A template also often incorporates protective framing to protect subsea

Equipments from impact damage. It should provide a guide for drilling, landing and latching of

Conductor and conductor housing and provide sufficient space for running and landing of the

BOP stack.

Codes Knowledge: - ASME 31.8, ISO 13628-1, ISO 13628-8, NORSOK M503, NORSOK U-CR-008

DNV-RP-B401, ASME Y14.5M.

Currently working:- Aker solutions (India)

From 10/02/2011 till Date

Currently working Project: - Kaombo (TOTAL)

Project Details: - Deep water manifold.

Current responsibility involves creating drawing for General arrangement, Assembly and structural weldment

Subsea marking drawing

Preparing bolt MTO.

Based on client comments CR documents modification.

Project: - Moho (Workover task) (TOTAL)

Project Details: - Flying Lead deployment frame (FLDF), Flow line deployment basket.

Prepared Hydraulic schematics for FLDF.

Raised an ECR & ECO based on client / manufacturing requirement and accordingly drawing updated & released.

General arrangement, lifting arrangement drawing for FLDF.

Structural welding & machining drawing for FLDF.

Prepared structural, Assembly and lifting drawing for deployment basket.

Product data sheet for deployment basket.

Project: - Moho Nord (TOTAL)

Project Details: - Deep water manifold.

Conceptual designing of production manifold.

Large bore piping detail design & insulation assembly.

Internal bore mapping design for production loop.

Lifting arrangement for production manifold & suction anchor.

Stack-up assembly drawing for manifold with leveling frame for checking installation interfaces.

General arrangement for production manifold & Large bore piping.

Large bore pipe & small bore pipe supports design.

Suction anchor, Suction top skirt & leveling frame design.

Critical dimension drawing for Manifold & leveling frame.

Structural drawing for manifold, Suction anchor & leveling frame.

Interface study for Manifold with Tie-in

Project: - Asgard SPS (Statoil)

Project Details: -Asgard Subsea compression

Subsea marking drawing for all SHS & MHS adaptor frame.

Critical dimension drawing for all SHS frame.

General arrangement drawing for all FIDC

Conceptual design for transportation skid bracket.

Subsea marking for Pump protection and cable protection.

Project: - Svalin (Statoil)

Deputation: - Norway for Svalin project (Remaining work from India)

Project Details: - Template Base four slot manifolds.

Designing & Drafting products through application of design software Solid works 2011 & PLM.

Manifold bottom structure main steel design & detailing.

Operation & maintenance manual for Template & Manifold

Weight control report for template & manifold.

Manifold assembly design & detailing.

Manifold subsea marking drawing.

Large bore piping design & detailing.

Small bore piping design & detailing.

Large bore piping general arrangement drawing.

Stack-up drawing for manifold & template for checking tie-in interfaces.

Detailing and dimensioning with GD&T of engineering drawings.

Internal bore mapping drawing for Production loop.

Project: - Kikhe (Murphy oil)

Deputation: -Malaysia for Kikhe project

Project Details: - Four slot Production, Water injection manifold & PLET with suction anchor.

Detail design of Suction anchor & Manifold structure.

Detail design of suction & grout system for manifold suction anchor.

Lifting arrangement for PLET & Manifold.

Subsea marking & GA drawing for Manifold.

Sea fastening design for Manifold & PLET

Transportation & Load-out procedures for Manifold & PLET.

Outline installation procedures for Manifold & PLET

Project: - Goliat

Worked from India

Project Details: - Template Base four slot manifolds.

Template & manifold critical dimensions drawing.

Strapping arrangement drawing of Landing frame (Template).

Suction anchor & ventilation hatch design for Template.

Manifold Sealine protection covers (SPC) design.

Large bore valve supports design for Manifold.

Work experience-Hi-Tech eSoft Ltd. (pune)

From 10/12/2009 to 8/02/2011

Project Detail:- Bearing design for the EMERSON

Types of Bearing:-

Mounted Bearings:-Ball Bearing, Taper Roller Bearing, Rod Ends, Spherical Bearing.

Set Screw lock Ball Bearing, Tapered Roller Bearing

Brands:- Sealmaster, Browning.

Unmounted Bearings:- Ball Bearing, Taper Roller Bearing, Spherical Bearing.

Brands:- McGill, Rollway

Parts of Bearing:- Inner, Outer, Seal Assembly, Retainer Assembly, Collar, Grease fitting Nipple.

1

Bearings With plastics Cap:-

1)Open End Cap Bearing.

2)Closed end cap bearing.

Open End Cap Bearing:-

Parts: - Housing (Pillow Block, Four Bolt Flange, Two Bolt Flange, 3 Bolt Flange), Insert, Grease

Fitting Nipple, Washer, Spacer, Seal (for open end two seal required), O ring, Open

End cap.

Closed End Cap Bearing:-

Parts:- Housing(Pillow Block, Four Bolt Flange, Two Bolt Flange, 3 Bolt Flange), Insert, Grease Fitting Nipple, Washer, Spacer, Seal (for closed end one seal required),O ring, Open End cap.

Work Experience: - PARI (PRECISION AUTOMATION & ROBOTICS INDIA LTD.)

15/09/2008 to 1/12/2009

Project Title

:

Overhead Conveyor

Scope of the Project

:

Design of Overhead conveyor to increase safety in processing components

Role/Responsibilities

:

DAP, Selection of Gearbox motors. Engineering of the conveyor & drafting, Structure design for 400 meters of conveyor.

Job Responsibility In the PARI:-

Designing & Drafting products through application of design software Auto Cad 2006 & Solid Edge V20/Solid works 2010 & PLM.

Conceptualization, layout & design for new automatic engine assembly line & SPM

Understand RFQ from customer & convert in functional requirements.

Identify critical brought out items & release first to achieve project delivery in time.

Prepare design for Gantry, grippers, Leak testing machine, Press machine, Turn over Devices, Lifters, conveyors etc.

Reverse engineering of the existing components for developing new models.

Ensuring product design is released in conformity to the technical specifications.

Detailing and dimensioning with GD&T of engineering drawings.

Bill of material generation, drawing release for fabrication.

Work distribution to vender's or in house tool room & fabrication workshop.

Interfacing with manufacturing/vender's for resolving technical quires / product development.

Raising requisition of required material (Standards / fabrication).

Creating casting

Work experience: BAKER GAUGES INDIA PVT. LTD (As a design Engineer)

Educational Qualification:

Degree

Institute / College

University / Board

Year

Percentage

Class

B.E.

C.O.E. Malegaon (Bk).

Pune

2007

61.34

First Class

D.M.E

E.S.S.Polytechnic

M.S.B.T.E.

2003

59.00

Second Class

S.S.C.

Shri chattrapti high school.

Pune

1998

50.00

Second Class

Computer Skills:

CAD/CAM Tool : UG NX5,Solidworks 2013,Solid edge V20/ST, Pro-e/wildfire 4.0, Auto-cad 2006,Catia V5, TEAM CENTER,ERP, SAP, Autodesk Inventor

Certificate: - SUBSEA 1 basic course, MOOC IFP school oil & gas

Operation Systems : Windows XP/ 7

Additional activity:-

1.Created presentation on large bore & small bore piping design.

2.Created Presentation on Template base & deep water manifold.

3.Created document for Small bore & Large Bore pipe routing.

Personal Information:

Name : Dhobale Abhijit Raghunath

Date of Birth : 7th Nov 1982.

Gender : Male.

Languages Known : English, Hindi, and Marathi.

Place:

Date: Mr. Dhobale Abhijit

Contact this candidate