JOCELYN DORVAL

** ******** ******, ******, ** ***21 H: 781-***-**** C: 781-***-**** acuud0@r.postjobfree.com PROFESSIONAL SUMMARY

Over 9 years of experience in electrical power distribution system design and analysis. Highly familiar with all major engineering standards associated with control gear components and electrical power stations in utilizing power system analysis software, including ETAP, AutoCad, Fast Look, and Power Tools for load flow, motor acceleration, and short-circuit analysis. Knowledge of power plant internal and external AC and DC plant distribution power systems and power related equipment with emphasis on equipment applications, specifications, details, testing, calibration, and installation. SKILLS

System-level electrical design and integration Basic ETAP 7.0

AC and DC Circuits Basic AutoCAD 2010

Wiring schematics Operation system software

Power Distribution systems Trained in operational testing

Microsoft Office, IBM Lotus Note Fast look Application

Technical support System troubleshooting

WORK HISTORY

Field Electrical Engineer

Spectraforcce at AbbVie, Worcester, MA 12/2015 to Present Review and update Plant Electrical Work Specification for Low and Medium Voltage Switchgear, Low Voltage Motor Control Centers, Testing, Inspection and Calibration, Distribution Panels, Receptacle Panels, Lighting Panels, Lighting and Power Distribution Equipment.

Develop 120 kVA UPS System.

Review and update Plant Electrical Drawings One-Lines Diagram to match Plant Power Distribution Equipment. Review and update Electrical Power Plans Drawings per Floor, and advise on major New Electrical Plant Project. Develop Electrical Power Distribution Spreadsheets for DPs, RPs, LPs, and MCCs per Floor. Field Electrical Engineer Reliability

Stepan Company, Elwood, IL 04/2015 to 12/2015

Develop and Standardized Plant Equipment Specifications for Distribution Transformers, Low and Medium Voltage Switchgear MCCs, Low and Medium Voltage Power Shielded Cables, Lightning Protection, 5KVA to 30 KVA UPS Systems, and Test Inspection and Calibration.

Develop Test Plan for 480 Volts and 4160 Volts Medium Voltage Switchgear Inspection Test Plan. Review and Incorporate Comments in Corporate Standards. Develop and Review the Plant Electrical Procedures. Perform Load Flow Calculations for Motor Starters, Perform Transformer Sizing, Cable, and Wire Sizing. Review, Comment, and Redline Electrical Drawings to match Plant Power Distribution Systems. Train on NFPA 70E Standards for Electrical Safety Requirements for Employee Workplaces. Develop Plant Procedure for Grounding System and Grounding Survey Guidelines. Plan and perform Preventative Maintenance Test on 480 V and 5KV Buses and MCCs and determine the length of PMs for the next Plant turnaround.

Field Electrical Engineer

Gemma Power Systems, Glastonbury, CT 02/2014 to 01/2015 Perform revision and comment on the electrical sections of the Engineering scope of work. Perform revision and comment on the Engineer of record’s electrical design, plans, and specifications, and prepare cost/constructability reviews. Review and comment on the scope of work of electrical subcontracts. Perform revision and comment on the electrical testing specifications and scope of work. Perform revision and comment on vendor drawings. Coordinate customer review of vendor drawings with the Engineer of Record if necessary. Review and comment on the scope of work of electrical subcontracts. Develop conceptual one-lines for the design criteria. Review all instrument and control specifications. Make recommendations to PEM for cost-saving installation, operational and performance improvements. Provide electrical technical interface to support Procurement. Evaluate electrical equipment and material proposals, prepare bid tab evaluations for electrical equipment. Assist with preparation of the purchase orders (PO) for electrical equipment and attend the major electrical equipment purchasing kick-off meetings.

Provide recommendations to the Electrical Field Engineer in preparation of Requests for Information (RFIs). Provide description and estimate duration of in-house electrical engineering and related procurement activities. Review the schedule activities twice monthly and report problems to the PEM. Knowledge of power plant internal and external AC and DC plant distribution power systems and power related equipment (e.g. Switchgear, Load Centers, Motor Control Centers, transformers, inverters, power panels, etc.) with emphasis on equipment applications, specifications, details and installation. Moxie Liberty/Patriot Power Station: Worked in the field to support 480V Motor Control Center (MCCs) and 5kV Power Distribution Center (PDC) MCCs. Support the Site back feed and first energization to grid to aid in start-up. Support the Site with System Turnover Package Sequence per Site Unit. Work with Project Engineering Manager to gain acceptance by the Owner and the interconnecting utility of the electrical One-Line Diagram. Provide recommendations to the Electrical Field Engineer in preparation of Requests for Information (RFIs). Electrical Engineer

Consinertech Group, Avon, MA 03/2012 to 02/2014

Follow all Safety procedures and support all Safety initiatives ensuring safety of personnel and safe operation of equipment, including, but not limited to: compliance with NEC, IEEE, and FSAR. Organize Engineering Team for Work Breakdown Structure (WBS). Establish the scope of Work. Organize and Prepare Weekly meeting to follow the Project Schedule and ensure on time deliverable. Develop sketch drawings showing basic equipment conceptual design layout inclusion in Marketing Department. Participate in meetings with customer to discuss technical issues relating to a particular project and to gather specific information needed to execute and complete equipment design. Review and ensure equipment design meets customer specifications. Review project specific drawings with manager of engineering prior to sending to customer for approval. Review and update drawings per customer comments.

Prepare and issue to Purchasing Department a complete engineering bill of material for project. Electrical Engineer

Shaw Group, Inc. - Stoughton, MA 06/2008 - 01/2012 Beaver Valley Nuclear Station Project: Walked down at the site to describe the basic element as performed by Plant System Engineer to present checklists that are available to aid in performing the walkdowns. Developed Cable Drawing One-Line Diagram for Electrical Power up to 245 KV Systems and Components. Basic Electric Control design, Performed root cause analysis of field failure. Supported Modification packages and Specification for Main Transformer High Voltage Bushing Monitoring System Document Change Package (DCP) and Engineering Change Package (ECP) for Units 1 and. Rendered technical drawings and electrical systems specifications that exceeded company standards. Prepared Engineering Report Scope of Work for Isolated Phase Bus Duct using Nuclear Engineering Procedure as Guideline. Prepared Engineering Report for Isolated Phase Bus Duct Tap Buses and Main Transformer portion. Prepared Engineering Report Reference Lists for AC, DC, LV AC, Power Block, Switchyard, EDGs, and BOP loads that are sequence onto EDGs. Wrote protocols, qualification documents, test plans and test reports for quality assurance purposes.

Point Beach Nuclear Station Project: Worked on Site to support Plant Modification packages such as revise the Quality Field (QF) as necessary to incorporate the owner accepted review (OAR) of a calculation, revised and performed Condition Report Notice (CRN) and Engineering Change notice (ECN) to update QF and Bill of Material (BOM) as necessary to incorporate the Proper Inserts Crimped Wiring and the new Watt-meter, provide design details to replace the feeder breaker and cable from one panel located in the control room to another panel located in the turbine building by running new cables and conduits for Unit 2. Used of Field Change Document Number to identify cable number that is not listed in the cable schedule for Engineering Change and the revision numbers. Grand Gulf Nuclear Station Project: Performed load calculation for sizing wire and circuit protection using company procedures. Applied principles of electrical theory to advance and improve product development and efficiency. Revised ETAP Calculation Summary Tables Short-Circuit and Motor Starting. Developed and populate AC Distribution Engineering Report and Short Circuit Analysis Summary Tables. Turkey Point Nuclear (PTN) Station Project: Walked down at the site to describe the basic element as performed by Plant System Engineer to present checklists that are available to aid in performing the walkdowns. Calculated the Radiation/Temperature/Pressure, to populate the Equipment Qualification Parameter Spreadsheets for Equipment Qualification uprate. Prepared EQ Engineering Report and incorporated changes from the checker’s comments. Prepared and populated the short-circuit analysis summary tables. Verified RAIs to comply with NRC procedures. Millstone Power Station (MPS3) Project for MUR: prepare the Engineering Scope of Work for the Isolated Phase Bus Duct using ESSOW Nuclear Engineering Project Procedure (NEPP 4-32-0, 09/04/2007) as guidance. Used of Millstone database to verify the latest CCNs, DCNs, and DCRs documentation for MPS3 Measurement Uncertainty Recapture (MUR). Prepared the Electrical System Interview Form and the ER reference lists for AC, DC, LV AC, Power Block, Switchyard, and EDGs. Prepared IPBD, IPBD Tap Buses, and Main Transformer portion of the MPS3 MUR ER. Marked up and reviewed the Electrical Distribution System ER. Continually improved methods and procedures for processes, measurement, documenting and work flow techniques. St. Lucie Nuclear Power Plant (FPL), North Anna and Surry Nuclear Station Projects: Developed Equipment Qualification Engineering Report (EQER) and Environmental Equipment Qualification (EEQ) Spreadsheet from EQ Master List to populate temperature, Pressure, and Radiation tables for LOCA vs MSLB inside containment and LOCA vs HELB outside containment. Testing parameters such as EQ (PWR and BWR) Temperature and Pressure Profile, IEEE 323 margins used for EQ comparison, Environmental parameters vs Time, Plotted each accident, and the Maximum Values are enveloped by the EQ Test Curves. Marked up and Reviewed System Component Evaluation Work Sheets that need to be qualified form 40 to 60 years under class 1E safety related using IEEE 344 Seismic condition and RG to reflect current revision. Innovations in Optics, Inc - Woburn, MA 07/2007 - 01/2008 Jr. Test Engineer (Contract)

Generate test plans and perform electrical, mechanical, and optical tests for a variety of optical systems.

Creating and making cable drawings and Calculated Electrical Impedance of AC Circuits of the Power Control Module (PCM).

Calibrate heater function in the GeneSensor instrument.

Use of data logger software or Microwave design tools and computer interface to collect data.

Analytical and organizational data using spreadsheet software. Debug Photodiode boards for Bright Field and Dark.

Monitored the manufacture of electrical devices and operations to ensure compliance with safety protocols EDUCATION

University of Massachusetts Lowell - Lowell, MA Current Master of Science: Power Distribution

University of Massachusetts Lowell - Lowell, MA June 2006 Bachelor of Science: Electrical Engineering

Massasoit Community College - Brockton Prince, MA May 2003 Associate of Arts: Liberal Art Sciences

IEEE PES Boston Chapter, Transformer Seminar May 2010 Shaw Group, Inc., Nuclear Plant Modification Packages Training Sept. 2011 Siemens Online Courses, Power Distribution, Motor Controls Oct. 2010 OTHERS

Languages: Fluent in English, French, and Haitian Creole Member of National Society of Black Engineers (NSBE) Feb 2006 Member of the Institute of Electronics and Electrical Engineer (IEEE) Jan 2009 References

Upon request

Contact this candidate