Yihong (Iris) Nash

Lafayette, NY *****

www.linkedin.com/in/yihong-nash-56317621

mailto:acuro2@r.postjobfree.com 315-***-****

Solutions-driven Senior Mechanical Engineer

Resolve Design Issues while Improving Quality and Controlling Costs

Dedicated CAM-trained expertise with designing, fabricating, project scheduling, prototype build, and component and unit-level qualification testing. Self-motivated and dependable professional experienced in variety of settings. Detail-oriented, bi-lingual (Cantonese / Mainland Chinese / English) team member with strengths and skills in:

Electronics Packaging Cable Design Piping Design Fixture Design

Injection molding part Design Geometric Dimensioning & Tolerancing

Meeting cost and Schedules (Stress & Thermal Analysis) ANSYS

EagleSpeed & EPDM & PIOS MRP Parts lister & EPDM DFMEA

PROFESSIONAL EXPERIENCE

ProE Engineer, Carrier Corp., 6304 Thompson Road, East Syracuse, NY 13057, 2010-2016

Performed engineering support, designed concepts and part / assembly modeling. Conducted TRB’s for design review, tooling release and test plan QRBs. Supported design failure modes effects analysis (DFMEA), and finite element analysis (FEA). Performed qualification tests for prototype, supported procurement, manufacturing engineering check sample (ECS), and manufacturer check sample (MCS). Development of HVAC products from concept to production. Participation in multifunctional product development teams and liaisons with marketing for the development and specification of new concepts for HVAC products.

Developed compressor piping, frame, schematic, high voltage harness and low voltage harness design for PrimeLINE, improving container efficiency 17%.

Created qualification test plans for Control Box, Access Panel, Orion and E-solutions programs, meeting milestone.

Delivered field trial retrofit kits and installation instruction on time.

Met Access panel cost target reducing costs $500,000.

Conducted control box burn test according plan.

Designed sheet metal parts and injection molding parts as projected.

Led qualification tests and meeting programs schedule.

Held positions of increasing responsibility, including Fabrication Leader on major cost reduction team, initiative reducing costs 25% on key product.

Mechanical Engineer II, Lockheed Martin Corp., 497 Electronics Parkway, Liverpool, NY 13088, 2008-2010

Hardware lead for Block III SPDP engineering build. Oversaw redesign of data signal processor including circuit card assemblies, cabinet upgrade, RF cable assemblies and created schematic diagrams and connection diagrams. Worked as liaison to operations for part design release and flow. Several environmental failures were overcome in a short duration to meet the program milestones. Worked directly with production to solve all process, quality and product issues. Designed and ordered all manufacturing tooling needed to deliver completed GD-53(V)2 radar processor assemblies. Attended component peer reviews to evaluate Design for Manufacturability. Addressed customer’s manufacturing questions and concerns. Set-up and executed testing/troubleshooting for circuit card assemblies.

Mechanical Engineer II, 497 Lockheed Martin Corp., Electronics Parkway, Liverpool, NY 13088, 2007-2008

Performed research, electronic package design, modeling and engineering build and fixturing for all aspects of engineering including thermal, analog and digital electronics packaging and data signal processor assemblies. Supported a multitude of programs meeting all cost and schedule commitments.

Mechanical Engineer I, Lockheed Martin Corp., 497 Electronics Parkway, Liverpool, NY, 13088, 2004-2007

Was responsible for designing and working collaboratively with manufacturing, quality and drafting to produce modkits for DO26, DO30, DO34 and DO37 upgrades to the TPS-59 programs. Through innovative packaging ideas as a team we were able to reduce program costs returning $1 million to the program. Mentored ELDP and interns on EagleSpeed configuration management tool and engineering processing.

Drafter, Lockheed Martin Corp., 497 Electronics Parkway, Liverpool, NY 13088, 2002-2004

Worked with both Pro/E models and AutoCAD; Created 3D models of parts and assemblies, created new drawings and incorporated change notices. Used GD&T based on ASME Y14.5M-1994 standards and the associated inspection practices knowledge extensively. Mentored designers on the conversion of raster scans into AutoCAD documents.

HVAC Drafter, RobsonWoese Inc., Consulting Engineers, Syracuse, NY, 2000-2001

Utilized AutoCAD to create floor plans for HVAC equipment. Calculated heat loss and gain. Worked with latest state codes, process and procedures for HVAC layouts.

AutoCAD Drafter, Knise & Krick, Precision Machine Tool Inc., Syracuse, NY, 2000

Responsible for drafting detailed drawings and plans for the manufacturing of

machine tools, providing exact dimensions of material. Also responsible for providing the

latest layouts and tolerance standards.

AutoCAD Drafter, Insul-Tek Piping Systems Inc. Syracuse, NY - 2000

Created piping sketches. Drafted detailed plans and drawings for layout, construction and operation of pipeline systems; developed detail drawings for construction of pipeline systems utilizing AutoCAD 2000.

Engineering Assistant, Guang Zhou Honda – Wang Yuan Motorcycle Co., P.R. China -1987-1990

Designed and tested motorcycle engine machine parts; developed assembly line process; drafted advanced stage design process; analyzed failed parts used in testing laboratory; performed time-study duties in department operation.

EDUCATION

2005-2014 Syracuse University, School of Engineering, Syracuse, NY – Earned MSME Spring 2014

Mechanical Engineering Program: Cumulative GPA 3.4: Advanced Mechanics of Materials – Stress and strain analysis, Fluid Dynamics, Finite Element Analysis, Vibrations, Composites Materials, and Materials Testing, HVAC Systems, Fundamentals/Turbulence, Building Environmental Modeling, Design for Manufacturing, Methods of Analysis/Mathematics, Living Systems in Arch&Engineer, Statistics for Engineers.

1996-2005 Syracuse University, School of Mechanical Engineering, Syracuse, NY – Earned BSME Fall 2005

Mechanical Engineering Program: earned a 3.5 GPA: Mechanical analysis ANSYS, Engineering Materials, Mechanics, Dynamics, Physics II, Science for 21st Century, Anthropology and Environmental Science, Project Management.

1998- 2000 Onondaga Community College, Syracuse, NY – Earned AAS May 2000

Earned AAS in Mechanical Engineering, Honors: studied Mechanical Drawing, Mechanical Parts Design, Intermediate CAD, Machine Tools, Calculus III and Chemistry, Physics, Java Programming, Pro/Engineering 2001, Differential Equations.

1984- 1987 Zhong Shan University, P. R. China – Earned AAS May 1987 Successfully earned Bachelor Degree following a general course of study with a concentration in Mechanical Engineering.

SUMMARY OF KEY QUALIFICATIONS

Pro Engineer/AutoCAD

Cable Design

Fixture Design

Metal stamping Design

CAM Trained/Quoting

Scheduling/Planning Tasks

ANSYS (Stress/Thermal Analysis)

Problem Solving/Troubleshooting

Contract Requirement Reviews

Parts lister/EPDM

DFMEA

Qualification tests

Electronics Packaging

Piping Design

Injection molded component Design

Geometric Dimensioning/Tolerancing

Team Building/leadership

Meeting cost and Schedules

Proposal Support

Trade Study

EagleSpeed/EPDM/PIOS MRP

Project schedule/Microsoft project

FEA

Secret Security Clearance

TOOLS

Pro-E Cabling

Pro-E Mechanisms

AutoCAD 2011

Matlab

Microsoft Suite

Pro-E Machine parts

Pro-E Sheetmetal

ANSYS Classic/Workbench

Zuken E3 Cable

Raster design

Procure to Pay (P2P)

Pro-E Assembly

Oracle/AutoVue

Java

Creo 3.0/Windchill 10.0

Adobe Acrobat Professional

LANGUAGES

Fluent in Cantonese and Mainland Chinese to support technical communications for business in China, Singapore and Taiwan.

REFERENCES

Available upon request

Contact this candidate