ARVIND RATHORE

Electrical Engineer ; ** Years Experience

Present Address: Flat No.: 310, Al-Bader Building, Near to Abu Dhabi Islamiyet Bank, Abu Dhabi, UAE.

Permanent Address: 2-CHH-5, Teachers Colony, Keshavpura, Kota, Rajasthan - 325009.

Mob: +971-********* / +971-******** (landline); +91-986******* (India No.)

E-mail: acumwe@r.postjobfree.com

mailto:acumwe@r.postjobfree.com

OBJECTIVE

To work consistently and effectively in a reputed organization as an Electrical Engineer where I can deliver and utilize my skills through which I can contribute to the organization. Experience in Detail Engineering; FEED Activities; Field Engineering; Installation & Commissioning Activities of Electrical System and Equipment related to Oil, Gas and Chemical Projects (El M’Zaid; ADCO; Gasco; Takreer; Petronas); Metal & Mines Project (Raz-Al-Khair, Saudi Arabia); Water (Yanbu-Madina Water Pipeline project); Infrastructure and Bio-Pharmaceutical & Pharmaceutical Projects (Reliance Life Sciences).

ACADEMIC PROFILE

B.E. in Electrical engineering (2001-2005) from Engineering College Kota, Rajasthan under University of Rajasthan, India with 75.47 % (honors) in 2005.

12th from Rajasthan Board with 81 % (PCM) in 2000.

10th from Rajasthan Board with 84 % (All subjects) in 1998.

1.WORK EXPERIENCE – PRESENT

Organization : CH2M Hill, ABU DHABI, UAE.

Position : Electrical Engineer

Period : From December, 2013 to Till Date

JOB RESPONSIBILITIES

Experience in Detail Engineering of Oil, Gas & Chemical Projects i.e. – Takreer, ADCO, Gasco, Petronas etc.; Involved in FEED Activities; Support to Installation & Commissioning Activities of Electrical System and Equipment related to Oil, Gas and Chemical Projects (El M’Zaid; ADCO; Gasco; Takreer; Petronas) and Water Projects (Yanbu-Madina Water Pipeline Project).

Worked as Lead Engineer on El M’Zaid-Algeria (Oil, Gas & Chemical project). Involved in Design & Engineering Activities of Electrical System and Equipment. Activities involve – Man Hour Estimation Activity wise; Tracking of Man Hours during engineering; Coordination with Clients and resolution of queries. Inter-discipline coordination; Guidance to Engineer and Designer.

Worked on Detail Engineering Activities of Water Pipe Line project (Yanbu-Madina Water Transmission Project).

Performed System Study (Load Flow, Short Circuit, Motor Starting, Relay Setting & Relay Coordination) using ETAP.

Preparation of Electrical Documents - Load list, Equipment List, Cable Schedule, Interconnection Schedule, Bill of Quantity, Material Requisition; Distribution Board Schedule.

Preparation of Hazardous Area Schedule and Layout.

Preparation of Single Line Diagrams and Metering & protection Diagram for Low Voltage; Medium Voltage and High Voltage Distribution.

Performed Electrical Calculations i.e. - Earthing & Lightning calculations; AC UPS Sizing calculation; EDG Sizing Calculation; Transformer Sizing Calculation; Cable Sizing Calculation; Selection of Light Fixtures; Capacitor Sizing Calculation; Heat Dissipation Calculation etc.

Preparation of Technical specification and Data sheet for Electrical Equipments – VFD; Distribution Transformer; Power Transformer; High Voltage & Medium Voltage Cable; Low Voltage Cable; LV Switchgear; Gas Insulated Switchgear; MV Switchgear; AC USP; EDG Set; Power Distribution & Management System; MV and LV Motors etc.

Guidance, Checking and review of Lighting layout, Earthing layouts, Raceway layouts and Equipment Layout.

Technical Bid Evaluation of Vendor Offers for LV switchgear, MV switchgear, EDG set, UPS system, HV, MV & LV Cables and their accessories (Termination Kit, Gland, Lug etc.), Power Transformer, Distribution Transformer & preparation of technical recommendation and finalization of Equipment.

Vendor print Review of Different Mechanical & Electrical packages i.e. - Power Transformer, Distribution Transformer, LV switchgears, MV switchgear, MV cables, LV Cables, HV Cables, Distribution Boards, DG Set System, UPS System, Distribution Transformers, Main & auxiliary pumps, Compressor, Chlorination, and Sewage Treatment plant, Utility Water system etc.

Review and Exposure to IEC; IEEE; IS; Shell and Aramco Standards.

Guidance and Review of Electrical Installation Drawings related to Earthing; Raceway; Power and Lighting.

Interdisciplinary Coordination and Site Support; Resolution of Site related Queries; Meeting with Vendor, Project and Clients for different Purpose; Guidance to juniors and Designers.

Preparation and Checking of Panel Schedule for Lighting, Power (convenience and Welding) and UPS system.

Finalization & Review of enquiry specifications for LV Panels i.e.-PCC, MCC, PDB, Cables, UPS, Light Fixtures.

Review & Finalization of Power & Control drawings of Switchboards and Distribution boards.

Assistance and support to Site Queries and Installation and Commissioning Activities.

2.WORK EXPERIENCE – PAST (BECHTEL CORPORATION)

A. WORK EXPERIENCE WITH BECHTEL, INDIA

Organization : Bechtel India Pvt. Ltd.

Position : Engineer – Electrical

Period : From February 2011 to June 2012 AND July 2013 to Nov., 2013.

JOB RESPONSIBILITIES

Involved in detail design activities of M&M Projects and Oil, Gas & Chemical Projects.

Worked in detail design activities of Metals and mines Project (RAZ-AL-KHAIR). It is World’s Largest Aluminum Smelter and Operation in Saudi Arabia.

Preparation and Review of Engineering Specification for Installation and Electrical Equipments i.e. – LV Cables, Distribution Transformers, Motors, UPS, VFD, Distribution Boards, LV switchgears, MCC, etc. for the Project.

Performed Power System Study – Load Flow, Short Circuit & Motor Starting Calculation etc.

Preparation and review of datasheet of electrical equipments.

Review of Electrical Installation Drawings.

Preparation of Electrical schemes for Crane feeds.

Preparation and Checking of Panel Schedule for Lighting, Power (convenience and Welding) and UPS system.

Preparation and review of Single Line Diagrams and Metering and protection Diagram for LV and MV Distribution.

Vendor print Review of Different Packages including Electrical packages i.e. MV switchgears, Transformers and Mechanical Packages (Bath Treatment Plant, Fume Treatment Center, Automatic Anode Stacker Crane, FTA Cranes etc.).

Preparation, Checking and review of Lighting layout, Earthing layouts, Underground Raceway layouts etc.

Study and review of IEC specification.

Power system analysis i.e. - Load flow analysis, Short circuit study, Relay coordination, with ETAP power system analysis software.

Electrical equipments sizing i.e. - Transformer, Generator, UPS & Battery charger system sizing calculation as per load details.

Selection and sizing of power cables, selection of Light Fixtures.

Finalization & Review of enquiry specifications for LV Panels i.e.-PCC, MCC, PDB, Cables, UPS, Light Fixtures.

Technical evaluation of vendor offers & preparation of technical recommendation.

Technical Bid Evaluation of Mechanical and Electrical Packages.

Review & Finalization of power & control drawings of switchboards and distribution boards.

Indoor and Outdoor Lighting Calculation with AGI-32 Lighting Software.

Working on SET-Route software for Cable and Equipment database preparation.

Working on 380 KV, 230 KV GIS and 34.5 KV GIS.

Preparation and review of MV and LV cable sizing calculations.

Site engineering support to Field Engineering, Construction, Commissioning and start-up team at Saudi for 1 year on Aluminum Smelter project.

B. WORK EXPERIENCE WITH SAUDI ARABIAN BECHTEL COMPANY AT SAUDI ARABIA

Organization : Saudi Arabian Bechtel Company, Saudi Arabia (Client – Maa’den-Alcoa)

Position : Engineer – Electrical

Period : From April, 2012 to June, 2013

JOB RESPONSIBILITIES

Technical & commercial discussion/ meetings with different Electrical Vendors (ABB, Schneider, L&T etc.) & Contractors (Kentz, CCC, NCC, Gulf Asia, NSH etc.).

Site engineering support to Field, Construction, Pre-op & Commissioning Teams for smooth handover of facilities & systems.

Coordination between Home office Engineering, Field Engineering, Vendors & contractors Team.

Resolution of Technical queries raised by Field, Construction, Pre-op, Commissioning, Contractor & Client Teams.

Closure of Punch list items of different electrical system & equipment’s and mechanical packages.

Electrical database (Cable/ equipment’s/termination/ routing) updating/ addition as per site requirements.

Routine Inspection of electrical system & equipment’s with client and field team.

Support to Pre-op and Commissioning Teams for final handover of system and equipment’s to Client.

Technically & commercially review of Vendor/ contractor’s claims/ variations/ change orders.

Design/ modification of electrical system/ drawings as per site/ client requirements.

Coordination between other disciplines, package vendors and contractors to resolve queries.

Assistance to Contracts & Procurement team for technical & commercial queries.

Preparation and review of datasheet of electrical equipment’s.

Review of Electrical Installation Drawings.

Preparation and Review of Engineering Specification for Installation and Electrical Equipment’s

Preparation of Electrical schemes for Crane feeds.

3.WORK EXPERIENCE – PAST

Organization : Larsen & Toubro Limited, Powai, Mumbai

Position : Asst. Manager – Electrical

Period : From May 2008 to January,2011

JOB RESPONSIBILITIES

Basic and Detailed electrical engineering for the Wecors, Indian navy projects, Electrical projects.

Electrical load list preparation and analysis.

Power system analysis i.e.- Load flow analysis, Short circuit study, Relay coordination, Harmonic Analysis, Transient stability studies with MiPower (equivalent to ETAP) power system analysis software.

Electrical equipments sizing i.e. - Transformer, Generator, UPS & Battery charger system sizing calculation as per load details. Power cable sizing.

Preparation, Finalization & Review of SLDs for Power, Lighting & UPS distribution system.

Preparation, Finalization & Review of Layouts for power points, earthing, cables tray, lighting and cable schedule.

Finalization & Review of enquiry specifications for LV Panels i.e.-PCC, MCC, PDB, Cables, UPS, Light Fixtures.

Technical and commercial evaluation of quotations from vendors & preparation of technical recommendation.

Technical and commercial bid preparation for the electrical projects.

FAT and SAT of electrical panels (PCC, MCC and DB), UPS systems, transformers, Cables and generate proper documents for the same.

Electrical system scheme preparation with proper inputs from customer.

Planning & Execution of electrical work as per schedule with proper co-ordination of Consultants, contractors and different internal departments.

Create Purchase Requisition, measurement and bill finalization of contractors, Service entry of contractors’ bills, Closure of contract of contractors and handing over project to maintenance department.

Review & Finalization of power & control drawings of switchboards and distribution boards.

Review & study of standards, rules & regulations of IS, IEC, UL, NEMA related to electrical equipment.

4.WORK EXPERIENCE – PAST

Organization : Reliance Industries Limited, Navi Mumbai

Position : Sr. Executive Engineer – Electrical

Period : From July, 2005 to April, 2008.

JOB RESPONSIBILITIES

Design, Engineering, Installation & commissioning of electrical projects.

Basic and Detailed electrical engineering for the cGMP-2, cGMP-4 and other electrical projects with the Consultant (M/s Jacobs H & G, M/s AKPGI).

Technical review & checking of electrical equipments drawings and specification i.e.- for transformer, UPS system, Battery charger, DG set etc.

Electrical equipments sizing i.e. - Transformer, Generator, UPS & Battery charger system sizing calculation as per load details.

Power cable sizing and earthing calculation.

Technical review and preparation of Electrical Documents i.e. – Specification, Specific requirement and technical bid analysis of MCC and PCC panels, Variable frequency Drives panels, HT panels (22 KV) with VCB, Transformers (2.5 MVA), DG set (2.5 MVA), Capacitor Panel (700 KVAR Rating), UPS and Battery systems for (30 and 80 KVA), Lighting fixtures, Power sockets, Earthing Strategy, Glands, JB’s, Power and control cables etc.

Preparation, Finalization & Review of SLDs for Power, Lighting & UPS distribution system.

Technical review and Finalization of documents- cable schedule, Load list, Equipment list, Different schemes for the starter feeders, Installation Drawings of electrical equipments etc.

Technical and commercial evaluation of quotations from vendors & preparation of technical recommendation.

Estimation & Costing of the projects.

FAT and SAT of electrical panels (PCC, BEPP, MCC and APFC Panel), UPS systems, transformers, DG set etc and generate proper documents for the same.

Electrical system scheme finalization for the above mentioned projects.

Planning of activities as per schedule with proper coordination of contractors and consultants and different internal departments.

Create Purchase Requisition follow up with the purchase department.

Review & Finalization of power & control drawings of switchboards and distribution boards.

Review & study of standards, rules & regulations of IS, IEC, UL, NEMA related to electrical equipments.

Finalization of Logics & Layouts for Fire Alarm, Public Address System, CCTV and Access control system.

Experience in Maintenance Activities of Electrical System and Equipment. Maintenance & Troubleshooting of MV & LV switchgear; LV Motor; Distribution Board; Capacitor Bank; Distribution Transformer; AC and DC UPS; Electrical Part of Mechanical System.

ERECTION & COMMISSIONING ACTIVITIES

Erection, Testing and Commissioning of 22KV/415V Substation.

Erection, Testing and Commissioning of 22 KV, 1250A, Vacuum Circuit Breaker.

Erection, Testing and Commissioning of 2.5 MVA, 22KV/415V Transformers with OLTC

Erection, Testing and Commissioning of L.T. Panels with different rating of Air Circuit Breakers (PCC, BEPP and MCC panels).

Erection, Testing and Commissioning of 80 KVA and 30 KVA UPS with battery system.

Erection, Testing and Commissioning of 700 KVAr APFC Panel.

Erection, Testing and Commissioning of 2.5 MVA Diesel-Generator Set.

Testing & Commissioning of SCADA System from Rockwell Automation for Substation.

Commissioning of VFDs (ABB make-ACS550 & ACH550 series and Siemens make-Micromaster 440 series) for AHUs and Process equipments.

PROFESSIONAL TRAININGS & LEARNINGS

YEP (Young Engineering Professional) course in Reliance Life Sciences, RIL (August,’06 – Jan,’07).

(2003-04): Bharat Heavy Electricals Limited, Hardwar

Duration: 45 Days.

Details: Detailed study about manufacturing of AC and DC electrical machines.

(2002-03): Rajasthan Atomic Power Station, Kota, Rajasthan.

Duration: 30 Days

Details: Came to know regarding power generation through nuclear energy as well as electrical

Energy transmission and distribution principals practically.

Seminars

Vernier Hybrid Machines: PMAC Machines

Vocational Training Seminar I: “On Rajasthan Atomic Power Station, Kota, Rajasthan”

Vocational Training Seminar I I: “On Bharat heavy Electricals Limited, Hardwar “

Projects

1. Load Flow Study using Gauss Seidel Method Simulation on MATLAB –

Make a generalized program for calculation of various parameters (P, Q, V, and angle) of PV, PQ and Load Bus.

2. Design Solar Power Station without Inverter for Street lightning –

Sunlight used to charge DC battery that will utilize for street lightning purpose without Inverter.

ACADEMIC HONORS

Gate Score of 94.09 Percentile in Gate-2005.

1st Rank in 12th Class and 3rd Rank in 10th Class.

Received certificate from MHRD (ministry of human recourses and development) in 10th class

SOFTWARE SKILLS

Platforms: MS-DOS, Windows-98/XP/Vista.

Software: MS-Office, MS-Projects, MiPower (Equivalent to ETAP), C-Language, AutoCAD, SAP (MM Module).

PERSONAL SKILLS

Excellent Analytical & Technical skills.

Excellent Planning & Managerial skills.

Good written and Communication skills.

Quick decision making and problem solving capabilities.

PERSONAL DETAILS

Father’s Name : Ramswaroop Rathore

Date of birth : 18th March, 1983

Nationality : Indian

Gender : Male

Marital Status : Married

Languages Known : English and Hindi

Hobbies and other interest : Listening music, playing cricket, internet surfing, Reading

Books etc.

REFERENCES

1.Mr. Vinaya Bhushan

Associate Vice President (Projects Head), WNS Global Services.

E-mail id: acumwe@r.postjobfree.com

2.Mr. Jithendran Lakshmana Dass

Sr. Manager (Electrical Projects)

E-mail id: acumwe@r.postjobfree.com

DECLARATION

I hereby declare that the information furnished above is true to the best of my knowledge

Place:

Date: Arvind Rathore

Contact this candidate