Roberto “Bobby” Martinez

C: 602-***-****, E: aculs3@r.postjobfree.com

MANUFACTURING ENGINEER

Introduction:

I currently have over 20 years of engineering experience. I am a hands-on individual that works on the floor for engineering troubleshooting and expediting solutions. Also knowledgeable in the Brazing and Heat Treat processes (both Vacuum & Air Atmosphere) of Aluminum, Nickel Alloy Steels to Cobalt, with a total of 10 certifications (SCA, source certified agent). I am also strong with traditional fabrication processes, CNC metal-spinning and robotics (certified) programming, forgings, castings, sheet-metal fabrications, tool designing, surfaces finishes

(chemical, plates, paints, etc.), welding (TIG, MIG & Resistance), NDT’s & DT’s to creating routers and quotes for customers to an outsourcer of components and tool building. Also, strong on 3-D CAD (certified). Currently, I hold a Bachelor of Science degree in Business/Project Management.

At this time I am working and looking for a new position with new challenges. I am available to interview in the early morning or in the late afternoon and can start 2 weeks after receipt of offer.

Education:

CDL Truck School, Inc.

Class A w/ X Haz/Mat, Tank Vehicle Phoenix, AZ

University of Phoenix

Bachelor Science in Business/Project Management Phoenix, AZ Phoenix Community College

Electromechanical and Drafting Technology Phoenix, AZ Experience:

Senior Manufacturing Engineer

2011 - Present

Precision Aerospace, (Aerospace Components)

Phoenix, AZ

• Manufacturing Engineer - primary role. Contract reviews and job planning. Creating or updating routers for jobs, reworks, troubleshooting fabrication and process issues on the floor. Planning and releasing jobs onto the floor. Assigning jobs to personnel and delivering tools, instructions and troubleshooting all facets from start to finish-ship. Machine Repair and Build - Research and help purchase and start a heat treat vacuum furnace. Include

Resume for Roberto “Bobby” Martinez Sheet 1 of 4

training operator and building programming for heat treat processes. Also, assist in technical, purchases and physical repair/overall the Hydro-form presses. Other machinery included.

• Create BOM’s, work instructions, MOT’s and routers for aerospace parts and assemblies. Troubleshoot and corrective action on existing parts to eliminate rejects and reduce cost to build. Involved with all facets of the company starting with raw stock, shear, bar to turn, punch, hydro-form, lasers and water jets. This will include tool/fixture-designing on the

“fly” for quick solutions and starting of job/processing.

• All outsourcing and outside special processes to welding-torch, spot and tool-seam, brazing

(vacuum, induction and torch), riveting and surface treatments onto final assembly and shipment of complex components.

• Work with suppliers and vendors for better processes, machinery and lower cost, but promote quality.

• Project engineering on new and current products to increase production and reduce cost.

• 3D-CAD design and facilitate to build details, assemblies and tooling for components.

• Certified and work with Solid Works 3D modeling and creating drawings for production, tooling and misc. Review all jobs with specification requirements prior to releases.

• Also work as liaison for Production and Management in releasing work assignments to personnel and machinery. “Walk” new and hot jobs projects through from start to finish to help assure movement of jobs and minimize bottlenecks and unforeseen obstacles. Customers are Honeywell, United Technologies, KSI, Vericor, etc. Manufacturing Engineer 2009 - 2011

Joined Alloys, (Aerospace Components and Accessories) Phoenix, AZ

• Planning/Process & Manufacturing Engineer - primary role. Creating routers for new jobs, R&O (repair & overhauls), reworks, splits and troubleshooting, for braze (vacuum, torch and induction), welding and heat-treating jobs for customers and internal jobs.

• Create BOM’s, work on CAPP for work instructions and routers for aerospace and helicopters parts and products. Also work on the floor as a liaison for engineering troubleshooting and expediting solutions.

• Work with manufacture, process and R&O customer jobs from small Solenoids, Rotary Seals, Honeycomb Assemblies, Compressors to Turbine Assemblies and Housings.

• Troubleshoot and corrective actions on existing parts to eliminate rejects and reduce cost to build.

• Involved with all facets of the company starting with raw stock, shear, bar to turn, punch, brake, bench to aluminum and high strength steel, aluminum and steel heat treats (anneal, solution and age) to welding-torch, spot and roll-seam, brazing (vacuum, induction and torch), riveting and surface treatments onto final assembly and shipment of complex components.

• Work with suppliers and vendors for better processes, machinery, and lower cost, but promote quality.

• Project engineering on new and current products to increase production and reduce cost.

• 3D-CAD design and facilitate to build details, assemblies, and tooling and misc.

• Review all jobs with specification requirements prior to releases. Create CAD’s, STAR’s SRI’s, submittals. SCA, source certified agent for Honeywell.

Resume for Roberto “Bobby” Martinez Sheet 2 of 4

• Source Certified Agent for Honeywell of Heat Treats for the following; Aluminum family, Steel family, Cobalt, Nickel Alloys, PH Steel, Stress-Relieves, Spring Stabilization, Ages, Tempering, Solution Anneals. Brazes for the following; Atmospheric and Vacuum.

• Customers are; Honeywell, Timken, D-Velco, Nelson Engineering, Powill, CAPO Aerospace, Boeing, Hamilton-Sunstrand, Premier Precision, etc. Manufacturing Engineer 2006 - 2009

F&B MFG, (Aerospace Components and Accessories) Phoenix, AZ

• Manufacture Engineer - Produce routers for new jobs, reworks and splits.

• Troubleshoot and corrective action on existing parts to eliminate rejects and reduce cost to build.

• Involved with all facets of the company starting with raw stock, shear, bar to turn, punch, brake, hydro-form, bench to heat treat steels and aluminums (anneal, solution & age) to welding-torch, spot and roll-seam, brazing, riveting and surface treatments onto final assembly and shipment of complex components.

• Work with suppliers and vendors for better processes, machinery and lower cost, but promote quality.

• Project engineering on new and current products to increase production and reduce cost.

• “Acting” quality engineer for GE and Hamilton in creating CAD’s, STAR’s SRI’s.

• Source Certified Agent for Honeywell of Heat Treats for the following; Aluminum family, Steel family, Cobalt, Nickel Alloys, PH Steel, Stress-Relieves, Spring Stabilization, Ages, Tempering, Solution Anneals. Brazes for the following; Atmospheric and Vacuum.

• Customers are; Honeywell, GE Aerospace, Pratt-Whitney, Boeing, Hamilton-Sunstrand,

Aeronamic-Urenco, etc.

Engineering & Development 2005 - 2006

Quail Run (Metal Building Products and Accessories) Phoenix, AZ

• Design/Development & Manufacturing Engineer - Design new products that are compatible for existing machinery and production lines.

• Design all tooling and machinery, both existing and new to produce better and new quality products.

• Tooling and machinery are composed of hydraulics, pneumatics, electronics, sensors, mechanical and motors.

• All designs are developed from ground-up with cost-analysis, design for manufacturing, design for ease of build, design for low cost, design for “out-sourcing” and design for low maintenance.

• All research for each project is based on standards and “cutting-edge” requirements.

• Designing done using 3D AutoCAD Inventor and later broken down to drawings, routings for individual work and jobs.

• Create text and illustrated proposals of all projects which includes capitol costs and labor.

• All jobs deal with roll-former cells, welders, assembly machines, hydraulic and mechanical presses, mills and lathes. Familiar with adhesives, metals, plastics, heat treatments, surface finishing plating, ASTM, ISO, SAE, DIN standards and others. Design and Manufacturing Engineer 2003 - 2005

Resume for Roberto “Bobby” Martinez Sheet 3 of 4

Coxreels (Hose & Reel Assy. for Fuel, Fire, Air & Power, etc.) Tempe, AZ

• Design and Manufacturing Engineer - Design progressive, combination and single hit stamping die assemblies.

• Tool engineering and design of fixtures and tools for press-brakes, welders, punch-presses, paint-line, machine shop, assembly departments (both mechanical & adhesives), assembly fixtures and test fixtures.

• Design, build, program robot and program CNC spinner in cell environment.

• Project engineer and certified robot programmer for this new 1st generation robot enclosed in a 60 foot diameter robot cell.

• The cell is a combination CNC (G-code), stamping-press, robot and conveyor system.

• Develop work-plans which include designs of the product (sheet-metal fabrication/CNC-turn parts), tools, fixtures/gages, handling and packaging.

• Create all drawings in Inventor 3D solids and AutoCAD from single components to assemblies composed of up to 60 components.

• Develop improvements, poka-yokes and troubleshooting of current stamping, welding powder-coating, improved motor spring manufacturing (increased spring life by 500%) and

assembly processes on the floors.

Engineer/Operations 2002 - 2003

Regenesis Biomedical (Health/Medical Equipment) Scottsdale, AZ

• Engineer/Operations. Working with documentations and procedures to meet FDA requirements, supply chain management, CAD drawings, MRB, assembly, building, testing and trouble-shooting new electro-mechanical products for the market, shipping and

receiving, working with patients with their units and inventory. Mechanical & Tooling Engineer 1985 - 2001

Triumph Corporation (Automotive Components) Tempe, AZ

• Work with Multi-Spindles, Single Spindles (both CNC & cam operated), grinders, welders, broaching, honing, rotary-transfers, pick & place robots, mechanical and hydraulic presses, CNC & manual lathe and mills.

• Designer and Engineer of Punch-Press, Stamping, Tooling & Dies. Provide project engineering support, product design, tool & engineering drawings through AutoCAD and traditional paper/board drafting, select equipment and personnel for builds.

• Support and supervise the project through the release of jobs within the company. Outsourcing used for cost, time benefits and labor costs.

• Die designing includes progressives, compounds, single-hits, secondary, forming, lancing, notching, thread-tapping and die drawing.

• Create MOT’s, Tool drawings, document control, ECN’s, BOM’s. Assembly of stamped to screw-machined parts through riveting, welding & brazing. Hands-on braze & spot welding.

• Test equipment-provide design, build & research for future products & continuous improvements.

Resume for Roberto “Bobby” Martinez Sheet 4 of 4

Contact this candidate