Ali M’ZALI Nationality: Algerian

BP **B- CP ***** Born 05-Nov-1963

Tizi Gheniff – Algeria Married, 3 children

Tel. Algeria +213-***-***-***

+213-***-***-***

Email. acuc1m@r.postjobfree.com

acuc1m@r.postjobfree.com

Ali M’zali

Maintenance / Mechanical Specialist

EXECUTIVE SUMMARY

I am a Maintenance Supervisor Mechanical background, I have more than 29 years experience in Oil & Gas environment. This experience encompasses Operation, Maintenance; Commissioning & Plant major’s shutdown preparation (dynamic and static equipment). I developed high skills in mechanical repair work, diagnostic, fault finding analysis and management of change.

Moreover, I am BSC Safety Team Supervising Certificate & Risk Assessment qualified.

MAIN RESPONSABILITIES

Maintenance Activities supervising.

Planning and scheduling work activities.

Prepares and organizes preventive and corrective maintenance actions.

Self motivated to Carries out highly skilled installation and maintenance works on dynamic & static equipment,

Diagnose the reasons of mechanical breakdowns on machines.

On job training to national technicians.

CMMS Datastriming use. PM routine finalising and material allocation.

Plan and Co-ordinate maintenance activities with other section and department.

Participate in the planning to prepare and to co-ordinate in the major shutdown operations

Participate on creating & updating risk assessment

Take an active role in ensuring that strict adherence to HSE aims and objectives (In accordance with HSE Political and Procedures, etc)

Conduct site HSE safety conversations (S) and Safety Observations (SO).

QUALIFICATION

MS-PROJECT Certificates (C.P.E Oran Algeria).

OPERCOM General Methodology training (Cegelec Abu Dhabi).

Centrifugal Pumps Advanced Certificates :( BHP Billiton ltd –Sonatrach (Ohanet Algeria).

Mechanical Seal Training Certificates: (BHP Billiton ltd - Sonatrach (Ohanet Algeria).

Pumps& Mechanical seal Maintenance, Fault finding, Analysis and Diagnostic Certificate. (Eureka Ind).

Gas Turbines Certificates :( Sonatrach Algeria).

Gas Compressors Certificates: Barrel and Horizontal joint (Nuovo Pignone Italy).

Turbo-Expander Certificates: Maffi Trench Corporation.

Man Borsing Gas Turbine Certificates.

Caterpillars Diesel and Gas Engine Maintenance, Fault finding, Analysis Certificate.

Record Vibration and analysis Certificate :( C.P.E Oran Algeria).

Vibration analysis System One Software Certificate: (Bentinie Nevada).

Safety valves/repair/testing Certificate: Ventil (Gemco International).

Laser Alignment (Optiline) Certificate: BHPBilliton ltd- Sonatrach (Ohanet Algeria).

Bolt Tensioning Certificate: (Tentec).

Scaffolding inspection qualifies Certificates.

Explosion Protection Engines Habilitation Certificates (Loher Gmbb Germany).

SAFETY TRAININGS

HSE Training Certificate: BHP Billiton ltd -Sonatrach (Ohanet Algeria).

B.S.C Safety team Supervising (British Safety Council Certificates).

BSC (Level III): Safety Award (I.C.O.H.S) International Certificates in Occupational Health and Safety trainings Intended.

Risk assessment qualified.

PROFESSIONAL EXPERIENCE

July 2013 – April 2015:

Maintenance coordinator: Shell Awoun Koula Gabon.

Support the Maintenance Integrity and Execution program to ensure application of appropriate maintenance management systems.

Assist and support on all Maintenance activities.

Diagnoses the reasons of mechanical breakdowns on machines and advice in any activity change.

On site maintenance activity supervision and safety observation.

Assure performance standards of Safety Critical Elements and act as “assigned” Shell Focal point of the Asset Technical Integrity.

Define Maintenance and Inspection strategies

Assist and act as representative for Shutdown activity preparation.

Ensure identification and availability of critical spare parts.

Ensure that Maintenance staffs have the required competencies to efficiently perform their jobs.

Prepare & Issue a weekly technical report to be send to OPA and OMI

Develop workforce competencies to undertake tasks effectively & efficiently.

August 2009 – July 2013

Exterran Ltd & Quimex: Operation & Maintenance Supervisor.

2012 – 2013 : Involved in Tazerka Tunisia working for ENI LNG plant.

In charge of all mechanical maintenance job, monitoring, establishment of PM tasks logs and coordination with customer “ ENI” to optimize availability of :

-Gas reciprocating JGH/4 Ariel compressors powered by 7042 Waukesha engines

-Propane screws Mycom compressors powered by 6 Kv Baldor motor. .

2009 –2012: Involved in Tsungui Gas Plant Gabon working for addax petroleum.

Operation and Maintenance supervision.

On Job training for Maintenance and operation technician.

Self motivated and bring maintenance suggestion to improve production.

Preparation of major maintenance and shutdown operation.

Creation of work procedure.

Preparation of risk assessment.

Arrange for appropriate work permit.

Carry out highly skilled maintenance and repair work on a variety of maintenance equipment like as:

Ariel JGE/ JGH- 4stages Reciprocating Compressors.

Caterpillar 3500 Gas Engine.

Static Equipment as:, Vessel, cologne Heat Exchanger, Manual &Automatic Valves, PSV Safety Valves, Safety Vibration switches control etc…

October 2007 – August 2009:

Mechanical & Shutdown Preparation.

- Working for BHP Billiton Ltd / Sonatrach Ohanet LNG plant Algeria

Mechanical activity supervising.

Prepares and organizes preventive and corrective maintenance actions.

Diagnoses the reasons of mechanical breakdowns on machines.

Reporting on computer system, PM routines finalizing

CMMS datastriming use, requirements of spare parts, Materiel allocation.

Involved in the planning to prepare and co- ordinate for our majors shut down operations.

Carry out highly skilled installation, maintenance and repair work on a variety of mechanical equipment (rotating and static equipment). Like as:

Centrifugal Gas Compressors: Nuevo Pignone and Man Borsig.

Air Compressors: Atlas Copco Oil Free Screw.

Reciprocating Gas Compressors: Nuevo Pignone.

Caterpillars Diesel engines(series 2500& 3000)

Pumps: Sulzer: (Mono & Multistage). Grundfos, Weir Pumps, Gears boxes, blowers

Gas Turbines: GE Frame 5, Nuevo Pignone, Solar Mars and Man Turbo.

Turbo-Expanders: Maffi Trench.

Static Equipment like as: heat exchangers, ovens, columns, towers, pipes etc…

Various Valves operating with a variety of actuators type (manual, electric, pneumatic, hydraulic and solenoid.).

PSV Safety valves repair and testing.

Machine tools operation, welding techniques NDT.

Scaffolding Inspection ability.

2006 –2007: Cegelec Contractor

Involved in Mussafah Abu Dhabi working for NPCC as Mechanical Commissioning Supervisor of 3x offshore modules in Onshore, project for Qatar QasII.

Perform inspection during fabrication activities, follow-up the progress of job and Safety Observations.

Inspections check sheets and visual examination of (piping and rotating machinery).

Provide expertise to site team to avoid/resolve quality problems.

Review vendor documentation.

Assist and support contractors and vendors throughout the completion.

Time table, discussing work progress with client.

Sept 2006 – April 2007 TOTAL Yemen:

Involved in Kharir Est Chaboua Yemen working for Total EP as a mechanical piping Commissioning Supervisor in a New Oil and Gas fields.

Supervise the preparation of all commissioning engineering Activities performed by contractor and ensure that OPERCOM methodology and ICAPS software are well understood and applied.

Support and assist contractor in his role including review of planning, requirement of materials in order to optimize the schedule.

Coordinate daily site activities with other parties.

Follow-up the progress of job and list items..

Arrange and update all punch list items

Insuring that the equipments are properly installed and ready for test.

Develop functional test procedures.

Supervise the work of vendor.

Establish the equipment documentation.

Review and approve all handover dossiers.

Take an active role in ensuring that strict adherence to HSE aims and objectives (In accordance with HSE Political and Procedures, etc…)

On-site Safety Observations.

Time table, discussing work progress with the commissioning manager.

2002 – 2006:

Mechanical Supervisor.

Working for BHP Billiton Ltd / Sonatrach in Ohanet LNG plant Algeria

From Pre Commissioning

Mechanical Activities Supervising,

On job training for national technician.

Prepares and organizes preventive and corrective maintenance actions.

Diagnoses the reasons of mechanical breakdowns on machines.

Reporting on computer system and PM routines finalizing

CMMS datastriming use, requirements of spare parts, Materiel allocation

Preparation of the systematic general overhaul.

Vibration data collection, Creation of route, download in the system.

Carry out highly skilled installation, maintenance and repair work on a variety of mechanical equipment (rotating machinery and static equipment).

Pumps: Sulzer: (Mono & Multistage). Grundfos, Weir Pumps, Gears boxes, blowers

Centrifugal Gas Compressors: Nuevo Pignone and Man Borsig.

Reciprocating Gas Compressors: Nuevo Pignone.

Air Compressors: Atlas Copco Oil Free Screw.

Caterpillars Diesel engines(series 2500& 3000)

Gas Turbines: GE Frame 5, Nuevo Pignone, Solar Mars and Man Turbo.

Turbo-Expanders: Maffi Trench.

Static Equipment like as: heat exchangers, ovens, columns, towers, pipes etc…

Various Valves operating with a variety of actuators type (manual, electric, pneumatic, hydraulic and solenoid.).

PSV Safety valves repair and testing.

Machine tools operation, welding techniques NDT.

Scaffolding Inspection ability.

1987 – 2002:

- Sonatrach Oil and Gas Algeria: Senior Mechanical Technician / Technician.

Carry-out highly skilled installation, maintenance and repair work on a variety of mechanical equipments like as:

Centrifugal Pumps: Union (Various), Bayron & Jackson, Dresser Injersoll, Guinard…

Static Equipment Like: exchangers, vessels, columns, boilers, Groves/V, Ball/V, Gate/V, Globe/V etc…

Caterpillar Diesel engines.

Gas Turbines: GE Frame 5, Frame 3

Centrifugal Gas Compressors: General Electric, Solar and Thomason.

Reciprocating Air Compressors: Sulair and Tidair

Mechanical work shop tools machines and Arc Welding use.

1986 – 1987:

-Sidal Reghaia Algeria: Mechanical work shop technician

Tools machines and Arc Welding use:

DIPLOMAS AND SPECIFIC TRAININGS

01/1989 to 02/1991: Senior Mechanical Technician: I.A.P Algeria.

02/1981 to 09/1982: C.A.P: Mechanical engineering. C.F.P.A Algeria.

02/1987 to 10/1987: Specific Qualification Training: C.F.P Sonatrach Alrar Algeria.

LANGUAGE

English: Read, written and spoken currently.

French and Arabic: Fluent

Contact this candidate