Summary of Experience

-*+ years of combined experience in various areas such as Oil and Gas facilities, transportation, wastewater treatment plants, Power Plants, Quality Assurance and Health & Safety.

-5+ years of experience in designing, engineering, testing & Commissioning Industrial Control Systems

-Excellent knowledge of Compressor Station and Industrial Turbine Control Systems

-Excellent in configuring and programming various HMIs, PLCs (Controllogix, compactlogix, Siemens S7-1500, GE, Horner) and Protection Relays (SEL-351S, SEL-710, SEL-751A, SEL-787,E3 Plus)

-Excellent programming skills in ladder logic, FBD, VBScript, C/C++, C#, Java, Visual Basic, SQL

-Excellent in configuring Industrial Networks/protocols such as Ethernet/IP, Modbus, DeviceNet, CIP, DH+, RIO, etc.

-Excellent in interfacing third Party Systems with Yokogawa DCS, SIS and SCADA

-Experience in writing Business proposals, audit reports, data sheets, specifications, purchase requisitions, Construction Layouts, DBM, Control Narrative, C&E, P&ID, etc.

-Excellent knowledge of Industrial Automation and Safety Instrumented Systems

-Excellent knowledge of Network Architecture, CSA Z662, CSA 22.1, ANSI/ISA-5.1, IEEE, ISO 9001, ISO 14000

Employment History

Tarco Automation Inc., Calgary, AB (May 2011 – Present): Control System & Automation Engineer

-Design and Engineering of Compressor Station and Turbine control system packages

-Design of PLC based fire and Gas detection system and ESD System

-Preparation of as-built drawings with field survey and Coordinating Panel Construction and FAT

-Writing technical documents such as Control Narratives, DBM, P&ID, Instrument Data Sheets, user manuals, Instrument List, Cable Schedules, Load calculations

-Developing PLC Programs and HMI/SCADA Programs, shutdown keys, Commissioning and Startup

-Developing cost estimates, bill of materials and managing client relationship

-Participating in Client Meeting for resolving Engineering Design challenges

Yokogawa Canada (May 2012 – Sep. 2013): Control System & Automation Engineer

-Coordinating and Managing Third Party Integration (TPI) and pre-FAT and FAT for the project

-Worked with a multi-disciplinary engineering teams to test, configure and troubleshoot 50,000 Distributed Control System (DCS) I/O points, implemented using Yokogawa Centum VP/Prosafe

-Integrating and testing Third Party Interface (TPI) Systems such as Bently Nevada MMS, BMS, Electrical MCC and Electrical Switchgear devices (E3 Plus, VFDs, Protection Relays) using Modbus TCP, Modbus RTU, Ethernet/IP and DeviceNet

-Configuring and Testing of Time Sync Functionality of DCS and Allen Bradley PLCs

-Performing Hardware Acceptance Testing, Loop checks, Alarm Suppression & Control Narrative checks.

-Functional testing of DCS based on electrical, loop and P&ID drawings

-Mentoring junior Engineers

-Prepare testing documents, report progress and technical problems to project and engineering supervisor

-Pro-actively identifies potential quality and efficiency improvements within assigned work

Datalog Technology Inc., Calgary, AB (May 2010 – May 2011): Wireline/LWT Field Supervisor

-Responsible for planning and preparation of well site operations and crew management

-Calibration, maintenance, and electronic troubleshooting of downhole tools and uphole systems

-Coordinating with other Field Supervisors to handle equipment movements and coordinate projects

-Processing and interpreting well log data

Det Norske Veritas, Calgary, AB (Jan 2009 – Feb 2010): Regulatory Compliance Engineer

-Responsible for conducting audits of client facilities and processes relating to general management systems, overall regulatory compliance, Pipeline integrity, Safety, Security, Emergency preparedness and response

-Creating and submitting reports with detail audit results and analyzing findings and making recommendations

-Actively promoting HSE at the company: ensuring safety manuals and processes are first class and kept current

-Participating in planning and facilitation of company’s Safety Meetings and coordination of Safety Audits at DNV Calgary office

PQA (Fredericton, NB) May 2007 – Dec 2008: Quality Assurance Analyst (Automation)

-Responsible for doing black box testing, including reviewing documentation, designing, writing and generating manual and automated software test scripts.

-Assisted in designing and implementing automation testing framework from scratch using HP Mercury Tools.

-Implemented and maintained MySQL databases for the testing framework: generated data using data generator tools.

-Worked with MS SQL Server management Studio express to develop databases.

-Reported, tracked and followed up on software defects using web based JIRA tracking tool.

-Testing HL7 messaging Structure, writing Bash Shell Scripts.

-Designing and implementing AJAX-enabled ASP .net Web pages using Visual Basic and C++.

-Provided QA Support for Cancer Care Ontario and Atlantic Lottery Corporation.

Enbridge Gas, Fredericton, NB (Sep 2006 – Dec 2006 & Sep 2005 – Dec 2005): Pipeline Inspector (Co-op Term)

-Quality assurances monitoring of contractors, to ensure that quality, policy and procedure standards are met

-Recording all associated construction activities for main pipeline and service pipeline installations

-Interpretation, modification and application of construction documents

-Meeting with potential customers to determine meter locations and record meter information

-Performing field work, planning, surveying and “project & people” management

Project Experience Samples

Station 802 Compressor Station (Montreal, Quebec)

-Design control panels for the Unit B1 and B2 Unit Control Panels, the Station Control Panel and the Fire and Gas (ESD) control panel using Siemens Simatic S7-1500/ET 200SP PLC I/O hardware.

-Designs work include using General Monitors Gas detectors and Flame Detectors for Fire & Gas, interface with Motor Control Center, local control panel and existing SCADA system.

-Perform detailed site survey to confirm interface requirements with existing field devices, local panels, MCC, etc.

-Prepare demolition drawings for the site demolishing works of existing control panels to be replaced.

-Designing Network Architecture and Layout

Station 1211 Compressor Station (Pembroke, Ontario)

-Design control panels for the Unit A1 and B1 Unit Control Panels, the Station Control Panel and the Fire and Gas (ESD) control panel using Siemens Simatic S7-1500/ET 200SP PLC I/O hardware.

-Designs include interface with Motor Control Center, local control panel and existing SCADA system.

-Design works include using Axiomatic IC-DR-13 for Valve Controller, Macro Sensor LVC2500 for LVDT signal conditioning, Vibrosmart Meggitt VSB/VSV300 for vibration monitoring and control, Jaquet T401 for speed measuring and overspeed protection.

-Perform detailed site survey to confirm interface requirements with existing field devices, local panels, MCC, etc.

-Prepare demolition drawings for the site demolishing works of existing control panels to be replaced.

Oakland Compressor Station (Oakland, Alberta)

-Design control panels for the Unit A1 Unit Control Panel, the Station Control Panel and the Fire and Gas (ESD) control panel using Siemens Simatic S7-1500/ET 200SP PLC I/O hardware.

-Designs include interface with Motor Control Center, local control panel and existing SCADA system.

-Design works include using Axiomatic IC-DR-13 for Valve Controller, Macro Sensor LVC2500 for LVDT signal conditioning, Vibrosmart Meggitt VSB/VSV300 for vibration monitoring and control, Jaquet T401 for speed measuring and overspeed protection.

-Perform detailed site survey to confirm interface requirements with existing field devices, local panels, MCC, etc.

-Prepare demolition drawings for the site demolishing works of existing control panels to be replaced.

-Designing Network Architecture and Layout

Other Design and Drafting of Turbine /Compressor Control System

-

-Candiac Compressor Station

-Pembroke Compressor Station

-Monchy Compressor Station

-Burstall Compressor Station

-Latornell Compressor Station

-Winchell Lake Compressor Station

-Jenner Compressor Station

-North Bay Compressor Station

-Keystone XL Surge Vessel Level Control Panel

Surmont Phase 2 (ConocoPhillips/Bantrel/Yokogawa)

-Third Party Interfacing (TPI) and data Mapping with Yokogawa DCS System (MMS,MCC,BMS, E3 Plus, VFDs, Overload Relays)

-Network Troubleshooting using protocol analyzers such as Wire Shark

-Worked with various devices such as E3 Plus Relays, SEL Relays, VFDs, Bentley Nevada MMS, ControlLogix PLCs

-Implemented and Tested Time Sync Functionality of DCS

-Setup and testing of DeviceNet Networks, Ethernet IP Networks, RS232, RS485

-DCS and HMI programming

-Software, Hardware, I/O & loop Testing (FAT)

Canadian Pacific

-Study of Train Break Control System

-Conduct detailed site survey to analyze the existing system

-Submitted Study Report with suggestion for improving the existing system

City of Calgary Train Wash and Water Reclaim System

-Upgrades to their existing Train Wash and Water Reclaim Control System

-Setting up Ethernet/IP Network

-PLC and HMI Programming (RSlogix 5000, FTView ME)

-Replacement and configuration of Soft starters and VFDs

-Loop checks and Commissioning the System

Pengrowth

-HMI Design and Programming (RSlogix 5, 500, 5000)

-Setup and troubleshooting of DH+ Network

-Modification of PLC program during commissioning

-Migration of RTAP HMI to Rockwell Factorytalk View SE

-Commissioning of HMI

DCP Midstream

-Design and Drafting of Turbine/Compressor Control Systems (GE Lm2500 Compressor Package)

South Alberta Institute of Technology (SAIT)

-Design and Drafting of Process Control System training module

-Panel Design

-Panel FAT and SAT

Slave Lake Vibration and Overspeed

-Design and Drafting of Turbine Vibration and over speed Protection System.

-Configuration of Jacquet T401 module and CEC 1-809 Vibration module.

-Experimenting with Accelerometers and proximity probes.

Bonnybrook Wastewater Treatment Plant

-Implementation and Testing of Machine Health Monitoring System.

-Design, implementation and testing of HMI using FactoryTalk View ME

-Vibration data collected using XM 1440 124 modules in conjunction with Accelerometer probes (SEC (Shinkawa) CM301U-S)

-Speed and reverse rotation is monitored using XM-220 modules in conjunction with proximity Probes (1442-PS-0830E0010A) and drivers (1442-DR-5850)

-Configuration and testing of Dynamic Measurement Module 1444-DYN04-01RA, Tachometer 1444-TSCX02-02RRB module, XM 124 vibration module and XM 220 dual speed module.

-Writing Operator and Maintenance Training Manual

-Preparing Factory Acceptance Testing (FAT) and Site Acceptance Testing (SAT) documents

-Performing FAT and SAT

Boiler Feed Water Pump Control (Medicine Hat Power Plant)

-Site Survey to study existing hardware and software used for control

-Panel Design, FAT, SAT and Commissioning

-Writing Control Narrative to Automate Parallel Pump Operation

-Creating instrument list

-Updating existing P&IDs with new instruments and Control Loops

-Adding Pump Control Graphics to existing Wonderware HMI Application

-Writing PLC program

Skills and Education

Bachelor of Science in Computer/Electronics Engineering May 2008: University of New Brunswick.

Proficient in the use and support of the following representative list software:

-Operating Systems: Windows, LINUX, QNX, Mac OS

-Microsoft Office Professional, Project, Visio, Word, Excel, MS Visual Studio .Net, AUTOCAD electrical (2014) /Mechanical Desktop, Quality Center & Quick Test Pro

-Proficy Machine Edition (GE PLC), Cscape (Horner PLC), Rslogix 5000 (Allen Bradley PLC), RSNetWorx,FactoryTalk View Studio, Wonderware (Intouch and Archestra), Siemens Step 7 and WinCC, Yokogawa Centum VP (very similar to Emerson’s DeltaV), acSELerator QuickSet, PlantPAx

-Programming :Ladder Logic Programming, FBD, VHDL, Java, C/C++,C#, Visual basic, Pascal, Perl, Assembly, SQL

Awards and Certifications

-P.Eng. (APEGA, Alberta, Canada)

-Certified Pipeline Inspector (New Brunswick)

-Certified Safety Program Developer (ENFORM)

Contact this candidate