R E S U M E
PERSONAL INFORMATION
Applicant’s Full Name: Allen Carullo Robrigado
Position Applied: STRUCTURAL WELDER / FCAW
2nd Preference : PLATE FITTER / BOILERMAKER
3rd Preference : PIPE FITTER/WELDER
Birth Date: March 09,1968 Birth Place: San Juan,Metro-Manila Age: 48
Height: 170 cm Weight: 72 kgs Gender: Male
Civil Status: Married Religion: Christian Nickname: Al
Passport #: EC4257837 Date Issued: May 26,2015 Date Expired: May 25,2020
EDUCATIONAL INFORMATION
Education
Inclusive School Years
(ex. 1999-2003)
Name of School and School’s Address
Course
Tertiary
1984-1987
Mapua Institute of Technology/Intramuros,Manila
Civil Engineering
Vocational
2014-2015
TESDA/Oz Assess & Training Center/Ermita,Manila
Refresher Course: SMAW,FCAW,GMAW,GTAW welding process
High School
1980-1984
Pio del Pilar Educational Institution/Makati,Metro-Manila
High School
Elementary
1976-1980
Guadalupe Elementary School/Guadalupe,Makati,MM
Elementary
WORK SUMMARY
With over fifteen years of custom fabrication experience and full knowledge of operation in four welding process (SMAW,FCAW,GMAW,GTAW welding processes/structural and pipe) in heavy and light engineering companies engaged in the industry of construction, housing,manufacturing,transport,earthmoving, mineral processing,water,oil and gas,and infrastructure.
Spent six years overseas in West Australian companies that engaged in light and heavy engineering fabrication.
Signed up to work as a fabricator and welder for three years and three months in Aussie Portables Pty Ltd rename to Australian Modular Solutions that builds transportable and prefab homes sitting in concrete slab,accomodations for mining(FMG,Rio Tinto,BHP Billiton, Gindalbie Mining), and modular buildings for commercial,residential and West Australian government’s housing projects.
Worked for a half year in A.D.Coote Sheetmetal and Co. Pty Ltd as a fabricator and welder in manufacturing of light /heavy steel poles,sub contracted transport steel parts, steel rebar cages for the concrete foundation deliver to Western Power projects in Western Australia and other states.
Employed for two and a half years as boilermaker/fabricator and welder,workshop and site, in Dwyer Engineering and Construction Pty Ltd that engaged in huge construction contracts for mining projects( Rio Tinto,Worsley Alumina, BHPBilliton,FMG,Greenbushes)Bunbury Port Foot Bridgery,3 km pipe spooling of Alcoa Australia in Pinjarra and Wagerup,Western Australia and lastly in Water Corporation/Southern Seawater Desalination Plant-Stage 1 and 2 in Binningup,Western Australia.
Eight years of local work experience and current in steel fabrication and welding for commercial,residential steel works with ongoing high rise building construction as a sub-contract fabricator and welder.
WORK HISTORY (from recent to previous company)
1.Company: Isometric Enterprise Inc.
Industry : Construction,Mechanical(Hvac,Chiller and fuel pipes)
Position :Mig and Arc Welder / Pipefitter /Fabricator
Address : 140 Kalayaan Avenue/8th Flr.,Quezon City,Metro-Manila,Philippines
Contact Person : Engineer Anthony Alberto – Project in Charge
Contact Number: 433-01-81,091********
Date : December 14,2015 – present
Projects : Makati Development Corporation’s High Street South Corporate Plaza Tower 1,Bonifacio Global City,Taguig, Metro-Manila,Philippines
Heavy equiptments and Tools handled: Elevated Working Platform,Hoist,Fixed & Portable
Drill press,electric/pneumatic drill,5”/7”/9” elect. Grinders,
Oxy-Acetylene,Plasma cutter, Electric Inverter Welding,
Machine,2’ squaring frame,adjustable square,chalkstone
Ballpin hammer,steel protractor,bandsaw,metric measuring
tape,chainblock,rebar wire tighter,pipe bender,C – clamps
Duties and Responsibilities (Job Description)
oMeet and discuss with project-in-charge engineer about the welding/fabrication task for the day.
oAttends general toolbox and safety meetings.
oSecure and filled-up hot work permits from head safety department.
oRead and interpret project fabrication drawing and welding specification.
oPrepare and cut all steel materials according to blueprint dimensions given.
oCut metal stocks by band saw,drop saw,and oxy acetylene according to drawing given.
oFit up and tack weld cutted metal stock,pipes,flanges, pipe’s elbows and tees to its completed figure.
oBevel grind,fit up and tack weld pipe’s fittings and steel pipes prior for welding.
oWeld 4”,6”,8” SCHD 40 carbon steel pipes butt welding,elbows,flanges, pipe’s riser and support, steel frame for newly built warehouse by Shielded Metal Arc Welding (SMAW)and Mig welding(GMAW)process.
oOperates hydraulic and manual pipe’s bender and pipe’s threader.
oPerform pipe support and pipe’s riser holes drilling by drill press and electric drll.
oRemoves welding spatter and clean welds.
oApply primer metallic oxide to all welded steel components.
oClean working areas after day’s work.
oWrites accomplishment daily report.
oCheck if all welding equiptments and power tools are in good condition.
oCheck inventory of all welding consumables and metal stocks.
oAssist electrician to install pipe’s support and pipe’s riser.
oAttends monthly site’s fire drill.
oAssist and work with trainees.
2.Company: Ricolite,Inc.
Industry : Construction,Electrical,Design and Installation
Position : Welder and Fabricator
Address : 3264 Zapote St.,Makati City,Metro-Manila,Philippines
Contact Person : Engineer Marty Paras
Contact Numbers: 896-18-61/090********
Date : August 03,2015 – December 10,2015
Projects : Makati Development Corporation’s Celadon Park Tower 3,Avida Towers Asten Tower 1
Heavy equiptments and Tools handled: Elevated Working Platform,Hoist,Fixed & Portable
Drill press,electric/pneumatic drill,5”/7”/9” elect. Grinders,
Oxy-Acetylene,Plasma cutter,Lincoln Elect. Inverter Welding
Machine,2’ squaring frame,adjustable square,chalkstone
Ballpin hammer,steel protractor,bandsaw,metric measuring
tape,chainblock,hydraulic pipe bender,C – clamps
Duties and Responsibilities (Job Description)
oMeet and discuss with project-in-charge engineer about the welding/fabrication task for the day.
oAttends general toolbox and safety meetings.
oSecure and filled-up hot work permits from head safety department.
oRead and interpret project fabrication drawing and welding specification.
oPrepare and cut all steel materials according to blueprint dimensions given.
oCut metal stocks by band saw,drop saw,and oxy acetylene according to drawing given.
oFit up and tack weld cutted metal stock to its completed figure.
oWeld pipe’s riser and support,warehouse steel frame,cable trays and electrical pipes by Shielded Metal Arc Welding process.
oOperates manual/hydraulic pipe’s bender and pipe’s threader.
oPerform pipe support and pipe’s riser holes drilling by drill press and electric drll.
oRemoves welding spatter and clean welds.
oApply primer metallic oxide to all welded steel components.
oClean working areas after day’s work.
oWrites accomplishment daily report.
oCheck if all welding equiptments and power tools are in good condition.
oCheck inventory of all welding consumables and metal stocks.
oAssist electrician to install pipe’s support and pipe’s riser.
oAttends monthly site’s fire drill.
oAssist and work with trainees.
3.Company: Cesneros Welding Shop
Position: Mig and Smaw Welder –structural and pipe.
Date: May 26,2014 – July 31,2015
Contact Person: Rodolfo Cesneros
Contact Numbers : 099******** / 8938762
Location: 358 Angela Village,Talon Uno, Las Pinas,Metro Manila,Philippines
Projects : Workshop steel works/ Metro-Manila Area Contracted Steel works
Heavy equiptments and Tools handled: Elevated Working Platform,Hoist,Fixed & Portable
Drill press,electric/pneumatic drill,5”/7”/9” elect. Grinders,
Oxy-Acetylene,Plasma cutter,Lincoln Elect. Inverter Welding
Machine,2’ squaring frame,adjustable square,chalkstone
Ballpin hammer,steel protractor,bandsaw,metric measuring
tape,chainblock,rebar wire tighter,pipe bender,C – clamps,
Duties and Responsibilities (Job Description)
oMeet and discuss with workshop manager about the welding/fabrication task for the day.
oRead and interpret customer fabrication drawing and welding specification.
oPrepare and cut all steel materials according to blueprint dimensions given.
oLay out,fit up materials to build structural roof trusses,steel beams and columns with cleats/gussets,reinforced steel rebar cages,steel gratings and wire mesh,steel windows,carbon steel tanks,tank’s stand,pipe support,steel staircases,railings,decorative steel gates,storage and trash bins, and steel decks.
oOperates cutting and heating equiptment such as oxy acetylene torch,plasma cutting,and bandsaw.
oMark out,assemble,fit up,and tack weld steel components with braces applied to avoid distortion.
oCheck with manager for final approval of steel component’s fit up prior to full weld.
oWork with trainees and assist them in fabrication/welding task and wear PPE at work site.
oEnsure fire extinguisher are all always present prior for workshop and sitework welding.
oPerform SMAW,GMAW,FCAW, and GTAW welding process in in all positions.
oPerform mathematical solution and use measuring tapes and digital level in fabrication task.
oClean welds by removing spatter,slags with chipping hammer and wire brushing
oDrives forklift and operate chain hoist to lift and fit up heavy steel components
oInspect safe operation of power tools, heating,cutting equiptment as well as welding machines..
4.Company: Dwyer Engineering and Construction Pty Ltd
Position: Mig/Fcaw/Gtaw/Smaw Welder and Boilermaker – structural and pipe
Date: September 05,2011 – March 14,2014
Location: 16-22 Spencer St.,Harvey,Western Australia
Company’s Website: www.dwyereng.com.au
Contact Person: Joe Dwyer
Contact Number: 97292922
Projects: Water Corporation/Southern Seawater Desalination Plant,Stage 1 & 2-Binningup,Western
Australia :June,2013 – March,2014
Alcoa Australia Refinery – Pinjarra and Wagerup Refinery,Western Australia:
January,2013 – June,2013
Cloudbreak/Fortescue Iron Ore – Pilbara, Western Australia:
September,2011 – December,2011
Footbridge/Bunbury river/Bunbury City Infastructure – Bunbury,Western Australia:
March,2013
Jetty Upgrade/John Holland – Cape Lambert,Western Australia:
June,2012 – August,2012
Switch Rooms/Rio Tinto – Newman,Western Australia:
September,2012 – October,2012
9/10M Conveyors/Laing O’Rourke – Port Hedland,Western Australia:
September,2012 – December,2012
Worsley Alumina Steel Works – Harvey,Western Australia:
January,2012 – June,2012
Heavy equiptments and tools handled: 4t & 7t Forklift,Elevated Work Platform – Scissor lift,Boom
Type lift,6t & 10t Overhead Crane,5”-7”-9” elect. Grinders,
Drill presses,Magnetic Rota broach,LE Arc/Gouging machine
Oxy-Acetylene,Plasma,Hydraulic plate beveler,
Bandsaw,Hydraulic multi purpose cutter and notcher,
Guillotine,Chainblock,Shackles,Lifting gears,2’ squaring
Frame,12”adjustable square,8m and 20m steel tape,chalk-
stone,pliers,spanner,C-clamps,Pipe clamps,steel scriber
computerized name tagger,sledge hammer,wedges,chisel,
fry bars,chains,straps,Vise grips,wirebrush,die grinder,
chipping gun,screwdriver,Generator/Welder,Pipe bender
Duties and Responsibilities (Job Description)
oReport to workshop/ site supervisor and coordinates the welding/fabrication task for the day.
oCollect engineering/ fabrication drawing from supervisor then analyze and read it.
oRead,study,and interpret detailed fabrication drawing,welding specification and standards.
oSort out and pick up beams,channels,and columns from beam lines according fabrication drawing.
oCut steel materials and pipes needed in assembling steel components in conforming with correct dimension.
oPre- clean up steel edges that runs weld on it by sanding and grind a bit prior to weld.
oMark out steel components using measuring tapes and digital level
oFit up,assemble, and tack weld steel components to build chutes,hoppers,buckets and heavy equiptment parts,crushers,columns,beams with cleats and gussets,conveyors for mining,water and chemical tanks 12 meter diameter up to 8 meter high,pipe braces,switch rooms,pipe supports,transportation pipes with flanges,railings,staircases,steel rebar gratings for foot bridge concrete,jetty hand rails,pontoons, and related steel works for mining industry.
oApply temporary bracing to ensure post welded components are within tolerance and dimension.
oPerform arc gouging to remove welded parts for repair particularly in heavy equiptment parts.
oDouble check with Quality Control supervisor about the steel fabrication fit up prior for full weld.
oPerform GMAW,FCAW,SMAW, and GTAW welding process in steel components and pipes in adherence of welding specifications in structural steel components,chutes,hoppers and tanks in all position.
oEnsure required prep bevel by grinding and oxy cut to all butt joint welding in structural and pipe welding specification.
oApply 2 inch and 3 inch pipes for spider temporary bracing in fabricating small/ large diameter carbon steel tanks to avoid distortion and to follow close tolerance prior to weld.
oInspect and repair welds for cracks and deformities.
oClean welds by removing spatter,slags,scales with chipping hammer/wirebrush and blending end weld with a die grinder.
oOperates cutting and heating equiptment such as oxy acetylene torch,plasma and hydraulic bandsaw for cutting,straightening,and champering/beveling steel components.
oLicensed to operate high risk overhead crane,forklift, and elevated working platform.
oStraightens steel components by heating to comply with dimension.
oOperates hydraulic steel plate/strakes beveler for butt weld to build tanks,hoppers,chutes, and bins.
oMarks out and cut holes in tank for fit up of pipes according from the engineering drawing given.
oFit up and tack weld in correct angle position carbon and stainless pipe’s tees,eccentric and concentric reducers, flanges,elbows,and gate valves in conforming of pipe’s fabrication given.
oAssemble gate valves to pipes with gasket and apply correct bolt tightening pressure and sequence by torque wrench
oStamped heat number at the end joint for each strakes/plates in fabricating tanks and compliance for welding inspection.
oSort out and prepare all equiptment such as power tools,tools,gears,generator needed on company’s ute truck for site work.
oDrives company’s ute for sitework and equiptment delivery.
oEnsure all fire protection equiptment and blankets are present prior for workshop and site work welding.
oFilled-up and complies ‘Job Safety Analysis” forms before and after duty in every site work.
oSecure all necessary permits before starting any sitework and sitewelding.
oLogged down and report any defective and unsafe gears,power tools and equiptment.
oAttends safety inductions and tool box meetings in every client site work.
oObserves personal protective equiptment in workshop and site work.
oApply pre-heat treatment to steel components prior to weld in compliance of welding procedure.
oMark boilermaker and welder’s ID number in every fit up and welded steel components and pipes.
oSign boilermaker and welder’s ID number in the blueprint of every steel and pipe fabrication for accountability purposes.
oStamped and tagged steel components and pipes with correct parts number in compliance of site assembly and delivery system to the customer.
oCoordinates with Quality Control supervisor after welding of steel components for final analysis.
oPerform housekeeping in workshop and sitework.
oWork with Apprentices and help them out in fabrication/welding task.
5.Company: A.D.Coote & Company Sheetmetal Pty Ltd
Position: Mig/Fcaw/Smaw/Gtaw Welder and Fabricator
Address: 51-57 Welshpool Rd.Welshpool,Western Australia
Company’s Website: www.adcoote.net.au
Contact Person: Martin Coolbear
Contact Number: 93617666
Date: February 14,2011 – September 02,2011
Projects: Western Power Corporation,Western Australia
Pipe Support/BHP Billiton – Western Australia:
February 14,2011- August,2011
Heavy equiptments and Tools handled: 4t Forklift,4t and 6t overhead crane,Oxy-acetylene,Plasma
Cutter,Stick/Mig/ and Tig welding machine,5” & 7”
Grinders,C – clamps,pliers,wedges,templates,chisel,spanner,
Metric sockets,ratchets,vise grip,bench vise, bench grinders
Ballpin hammer,chipping hammer,chains,straps,chainblock
Hydraulic pipe bender,bandsaw,drop saw,10m measuring
tape,2’ square and 12” adjustable square,wirebrush,rubber
mallet,spanner, Hydraulic pipe bender
Duties and Responsibilities (Job Description)
oReports and coordinates with supervisor for the day task.
oInterpret and read fabrication drawings and welding specification.
oCut small diameter steel pipes,assorted steel bars by bandsaw,hydraulic guillotine,drop saw,and plasma cutter for fit up preparation in conforming drawing spec prior to weld.
oPerform oxy acetylene cutting and heating,plasma cutting,and hydraulic pipe bending.
oFit up steel pipes,sheetmetal bended columns in adherence of fabrication spec. to build decorative light poles,heavy duty poles for power transmissions,round reinforced steel rebar cages(for foundation foortings on heavy duty/high end transmissions poles) and utility poles both by Western Power.
oPerform GMAW,FCAW,SMAW, and GTAW welding process in compliance of welding procedure.
oRemoves spatter and slags for clean up after weld by chipping hammer and wire brushing.
oOperates single and double seam welder machine for pole fabrication.
oOperates wireless controlled overhead crane and forklift
oAlways wear personal protective equiptment in workshop.
oPerform housekeeping after daily task.
oAssist and work with Apprentices.
oReport to supervisor any defective and unsafe gear and equiptment.
oAttends pre start and safety tool box meetings.
6.Company: Aussie Portables Pty Ltd / Australian Modular Solutions
Industry: Construction,Housing,Mining
Position : Mig and Fcaw welder,Fabricator
Address: 40 Embleton Avenue,Embleton,Western Australia
Company’s Website: www.ams-group.com.au
Contact Person: Mr. Nick Carrington
Contact Number: 95714173
Date: September 05,2007 – December 27,2010
Projects: Rio Tinto Accomodations – Newman,Western Australia: Sept/2007-Dec/2007
BHP Billiton Accomodations – Port Hedland,Western Australia:Jan/2008-June/2008
FMG Mining Accomodations – Karratha,Western Australia:July/2008-Dec/2008
Karrara Mining Camp Site- Karrara,Western Australia:Jan/2009-Sept/2009
Western Australia Government Housing – Oct/2009-Dec/2009
Budget Portables,Onsite Portables – January,2010 – Dec/2010
Heavy equiptments and Tools handled: 4t Overhead crane,4t and 7t forklift,Mig and Stick welding
Machine,grinders,oxy acetylene,ballpin hammer,pliers,rota
Broach,drill presses,elect. drill,die grinder,chisel,wedge,
Chipping hammer,C clamps,2’ squaring frame and 12”
Adjustable square,8m and 15m measuring tapes,vise grips
Spanner,Generator/Welder,Hydraulic pipe bender
Duties and Responsibilities (Job Description)
oCollaborate with supervisor on fabrication/welding task for the day.
oRead fabrication drawing and welding procedure specification.
oCollect and cut all steel materials ( I-beams, channels, galvanized square tubes) in accordance with company’s technical drawing of various modular buildings.
oFit up I-beams, galvanized square tubular and channels to form chassis of assorted buildings.
oEnsure fit ups of chassis are spot on squarely and diagonally prior to weld.
oLay out and weld reinforced steel rebar for concrete slab/foundation in prefab homes.
oPerform GMAW.FCAW, and SMAW welding process in compliance of welding procedure.
oOperates oxy acetylene, plasma cutting, and rotary magnetized drill for fabrication of outriggers.
oInspect and maintain the safety and good operation of power tools, power leads, cutting and heating equipment, as well as welding machines.
oHelp out Apprentices and work alongside.
oMonitors stocks of all welding consumables.
oDrives and operates forklift and over head crane.
oObserve safety by wearing personal protective equipment and good housekeeping in workshop.
oReports defective and unsafe power tools and equipment.
oSmooth steel components by sanding and deburr sharp edges.
oAssemble sets of chassis to form large building flooring.
oAttends and participate in Tool box meetings.
oDrives company ute to worksites.
.
7.Company: YDRAH Construction & Project Management /Individual Private Welding Contracts
Industry : Construction
Position : Welder and Fabricator
Address : 171 11th Avenue,Grace Park,Caloocan City
Contact Person: Engineer Hardy Gollayan
Contact Number: 3341586/ 092********
Date: August 01,2001 –August 30,2007
Projects: K – Metart Enterprises: 8/15/01 – 12/15/02
VDJ’s Eatery: 8/26/03 – 11/26/03
YDRAH Workshop Steelworks Individual Orders: 1/2001 – 8/2006
FMJ Express Corporation: 9/15/06 – 12/15/06
SRL Int’l Manpower Services: 1/01/07 – 8/30/07
Heavy equiptment and Tools handled: 4t forklift,1.5t swivel hoist/crane, Stick and Mig welding
machine,grinders,drill presses,electric drill,chisel,wedge,
C – clamps,ballpin hammer,chipping hammer,10m steel
measuring tape,C clamps,vise grip,bench vise,pipe clamps,
pliers,allen wrench,adjustable spanner,chainblock,chains,
Phillips and flat srew driver,pipe clamps,files,die grinder,
Chalkstone,scriber,permanent steel marker,pipe bender,
rebar cutter,manual pipe bender.
Duties and Responsibilities (Job Description)
oCoordinates with manager about clients technical drawing.
oCut all steel material according client’s fabrication drawing.
oAssemble,fit up and tack weld steel components in conforming of clients drawing to build deckings,windows,gates,tank’s stand,pipe support,steel rebar gratings for concrete slabbing,I and H beams/columns with cleats/gussets,and structural trusses.
oApply temporary braces to prevent distortion,warpage of steel structure in close tolerance.
oPerform SMAW,GMAW, and FCAW welding process with client’s welding procedure.
oClean welds by wire brushing and chipping hammer.
oManually bend pipes.
oConducts concrete drilling for rigid anchoring for steel works.
oApply primer and final coating on finish steel works by brushing,spray painting.
oObserves safety by wearing personal protective equiptment and good housekeeping
oAlways check the safety operation of all equiptments and gears used inside of workshop.
SEMINARS / TRAININGS / ACHIEVEMENTS
DATE:
TITLE:
Conducted by:
30/01/2015
National Certificate II – GAS TUNGSTEN ARC WELDING
TESDA ACCREDITED – OZ ASSESS AND TRAINING CENTER
27/11/2014
National Certificate II – GAS METAL ARC WELDING
TESDA ACCREDITED – OZ ASSESS AND TRAINING CENTER
23/10/2014
National Certificate II – FLUX CORED ARC WELDING
TESDA ACCREDITED – OZ ASSESS AND TRAINING CENTER
01/10/2014
National Certificate II – SHIELDED METAL ARC WELDING
TESDA ACCREDITED – OZ ASSESS AND TRAINING CENTER
29/10/2014
Welder’s Performance Quality Test – SMAW 6G
TESDA ACCREDITED – OZ ASSESS AND TRAINING CENTER
04/10/2010
Welder’s Performance Quality Test – FCAW 6G
TESDA ACCREDITED – YWA TRADE TEST AND TRAINING CENTER
20/02/2013
Welder’s Qualification Test Record – GMAW/FCAW Plate
DWYER ENGINEERING & CONSTRUCTION PTY LTD
26/08/2008
Welder’s Qualification Test Record – GMAW/Plate
METALLURGICAL TESTING SERVICES /MDR PTY LTD
19/07/2013
WORKING SAFELY AT HEIGHTS
CONSTRUCTION SKILLS & TRAINING CENTRE
26/07/2013
ENTER & WORK IN CONFINED SPACES
CONSTRUCTION SKILLS & TRAINING CENTRE
29-30/07/2013
ELEVATING WORK PLATFORMS
CONSTRUCTION SKILLS & TRAINING CENTRE
29/07/2013
APPLY OSH REQUIREMENTS,POLICIES,PROCEDURES IN CONSTRUCTION INDUSTRY
CONSTRUCTION SKILLS & TRAINING CENTRE
28/04/2012
CONDUCT FORKLIFT OPERATION
TOM PRICE AND SONS
15-23/05/2007
Certificate of Attendance/GAS METAL ARC WELDING
YWA TRADE TEST & TRAINING CENTER
03/04/2007
TRADE EVALUATION TEST/GAS METAL ARC WELDING
EXECUTIVE TECHNICAL CONSULTANTS
29/09/2010-01/10/2010
Certificate of Attendance/FLUX CORED ARC WELDING
YWA TRADE TEST & TRAINING CENTER
09/10/2010
INT’L. ENGLISH LANGUAGE TEST SYST.
IDP / AUSTRALIA
LICENSES AND CERTIFICATIONS
Title:
License / Certificate #:
Validity:
NC II/Gas Tungsten Arc Welding
CERT. NO.151***********
30/01/2015 – 01/30/2020
NC II/Gas Metal Arc Welding
CERT. NO.141***********
27/11/2014 – 27/11/2019
NC II/Flux Cored Arc Welding
CERT. NO.141***********
23/10/2014 – 23/10/2019
NC II/Shielded Metal Arc Welding
CERT. NO.140***********
01/10/2014 – 01/10/2019
High Risk License / Forklift
LIC. NO. WL 3285090
31/05/2012 – 31/05/2017
High Risk License / EWP
LIC. NO. WL 3285090
31/05/2012 – 31/05/2017
Western Australia/Driver’s License/Class “C”
LIC. NO. 5651202
09/10/2013 - 09/10/2014
Western Australia/Construction Card
CARD NO. 692454
29/07/2013 – 29/07/2018
CAREER RELATED AND OTHER SKILLS
oKnowledgeable of using fabrication tools,measuring tapes and precision tools.
oFamiliar using the four welding process: SMAW,FCAW,GMAW,GTAW
oExposed in all welding positions in plates and pipes: Flat, Horizontal, Vertical, Overhead
oRead blueprints and interpret welding symbols.
oOperates material handler’s: Forklifts,Outreach Truck, Overhead Crane,Company’s Ute
oLicensed to operate Elevating Work Platform (EWP)
oWestern Australia Driver Class “C”
oComputer literate on Windows
KNOWN LANGUAGES (Answer with Yes or No)
Language
Speak
Read
Write
English
Yes
Yes
Yes
Arabic
No
No
No
Others: (Pls specify)
Tagalog
Yes
Yes
Yes
CONTACT DETAILS
Mobile #: 091********
Landline #: 8826797
Email Address: acu0h3@r.postjobfree.com
Skype id: allen.robrigado
Current Address: 2019 General Ricarte St., South Cembo, Makati City,Metro-Manila,Philippines