ALBERTO P. JUMARANG
** ******* ******, ******** *, CALAMBA CITY,
PHILIPPINES
TEL. NO. 006*-***-*** 3769
Email add: actilo@r.postjobfree.com
OBJECTIVE: To show my strength and capability of doing things responsively and perform the task given to me efficiently. And to distribute all I have learned for the improvement and for the betterment of the company. JOB HISTORY:
I. MECHANICAL SPECIALIST III (MACHINE SHOP FOREMAN) PETRO CANADA LIBYA LIMITED (HAROUGE OIL OPERATIONS) COMPRESSOR DEPARTMENT
AMAL V-12, 690, Tripoli, Libya S.P.L.A.J.
September 25, 1989 – present
JOB DESCRIPTION
Maintenance and repair of gas and air compressor in oil operation and production.
Do preventive maintenance of cooper Bessemer and Ingersoll rand compressor such as compressor valves and lubrication inspections.
Renewed and design oil, gas, air and water line for better and easy maintenance during shut down operations.
Over hauled water pump, hydraulic pump and motor leaking during operation, shut down such equipment, and put on service after completion of said job.
Do coupling alignment motor pumps and turbine after over hauled using dial indicator (Universal Dial).
Repair water, hydraulic motor and oil pump mechanical seal when leaked.
Repair broken coupling and do alignment as per drawing.
Repair cooler leaked on inter-stage cooler and plug broken tube (change the whole unit when leaked or broken tube is 25%)
Do overhauled on air compressor on site when shutdown and prepared all materials needed on the unit.
Do third stage valve inspection every three months and monitor inter-stage pressure as well the temperature to keep the unit running at all times.
Assist overhauled crew and prepare materials needed one day ahead before overhauling.
Do the test run of the unit after overhauling and run for 24 hours underload.
II. MACHINIST TECHNICIAN
ARAB SHIPBUILDING AND REPAIR YARD COMPANY
50110, Al Hidd, State of Bahrain
March 22, 1987 – March 22, 1998
JOB DESCRIPTION:
Received an advanced of technical training experiences in metal cutting / machine shop equipment and tools (Hydraulics
& Pneumatics).
Do light tolerance machining using CNC Lathe, milling machine, lathe machine, Horizontal / Vertical Boring machine
(small, medium, big) cylindrical grinder and power hacksaw.
Fabricate & maintain machine shop tooling, jigs, and fixtures in ship repair yard.
Trained and developed for basic and advanced technical skills of machining with appropriate methods and media revolving around on the job.
Do actual maintenance work (troubleshoot, repair & preventive).
III. MACHINIST SPECIALIST
ARABIAN AMERICAN OIL COMPANY
MECHANICAL SERVICES SHOPS DEPARTMENT
NORTHERN AREA SHOP DIVISION
Juaymah, Dhahran, Kingdom of Saudi Arabia
October 25, 1980 – May 7, 1986
JOB DESCRIPTION:
Can operate and set up all machine shop equipment and tools and maintain (troubleshoot, repair, preventive).
Do actual maintenance work of said shop equipment & tools, Hydraulic & Pneumatics controls.
Fabrications of all machine shop tooling, jigs and fixtures.
Do all actual machining of all refinery tools and equipment that is being repair advanced technical skills training of Saudi Arab machinist to develop training programs with appropriate methods of machine shop jobbing system and repair.
Can interpret blue printed drawing accurately and the right kind of machine involved then do the actual machining without further instructions and supervisions.
PUMPS:
Repair of shafts and fabricate, if the part is totally worn out and also the case rings and impeller wearing rings, stuffing box, shaft sleeves, pump case, oil retainer and others.
In preventing vibration, balance the coupling after machining.
Machine the welded pump case to suit the original one.
Machine the bearing journals accurately as per work order of the pump shop.
HEAT EXCHANGER, HEADERS AND COOLERS:
Fabrications and repair of all kinds of tube sheets (fixed and floating), baffles, bundles, channel and channel head cover nozzle.
Machine welded monel overlay on the existing tube sheet and partition groove as per work order of the heat exchanger shop.
Do all the machining with care and tolerances both on the field and shop using portable flange facing machine.
Using carbon numerical control drilling machine on drilling tube holes of the tube sheet and baffles one after the other. HIGH / LOW SPEED ELECTRIC MOTORS:
Fabricate and machine rotor shafts.
Machine all bearing journals with tolerance accurately.
Re-sleeve or metalize end bell bearing housing and shafts.
Machine the flatness of the EOOT Motor body as per quality assurance of the electrical shop.
Balance the rotor with or without fan coupling to prevent its vibration.
IV. MACHINIST
INSTITUTE OF AGRICULTURAL ENGINEERING AND
TECHNOLOGY
COLLEGE OF AGRICULTURE
Los Baños, Laguna, Philippines
March 18, 1977 – April 18, 1980
JOB DESCRIPTION:
Operate and maintain all shops equipment such as lathe machine, shaper, milling machine, radial drill, power hacksaw, squaring sheer and circular cutter machine, electric and gas- welding machine.
Maintenance all shop tools both on metal and wood.
Keeping all shop supply and equipment in proper order to make it easy for inventory and inspection.
In instruction, assisting all major agricultural students in making special project and thesis.
In research, fabrication of peanut shelter, flatbed rice drier, bamboo propeller, wind mill, rice transplanter and harvester, cassava solar drier and copra drier.
V. MACHNIST TECHNICIAN
ENGINEERING EQUIPMENT INC.
Mandaluyong, Metro Manila
Philippines
May 11, 1976 – January 26, 1977
JOB DESCRIPTION:
Operate and set up all machine equipment such as vertical and horizontal boring machine, grey planer machine, planer type milling machine. Lathe machine, vertical turret lathe, power hacksaw and radial drill machine.
Can interpret blue printed drawing accurately and give the correct sequence of operation involved, the right point of reference to take proper set up and toiling required, the machine involved and do actual machining.
Well versed in machine shop jobbing system of operation because of wide knowledge and experience in all kinds of job that needs a great care and accuracy.
VI. MACHNIST
DEPARTMENT OF AGRICULTURE ENGINEERING
U.P. College of Agriculture, Los Baños
Laguna, Philippines
July 13, 1973 – April 1, 1976
JOB DESCRIPTION:
Assisting laboratory instruction of all agricultural engineering students.
Fabricate and repair of agricultural machine like sorghum thresher, peanut sheller, rice thresher, rice drier.
Maintain and operate all machine shop equipment such as lathe machine, milling machine, radial drill, squaring shear, metal bender, power hacksaw, gas and electric welding machine.
EDUCATION BACKGROUND:
I. INTERNATIONAL TRAINING CENTER
ARAMCO TRAINING CENTER
RAHIMA, KINGDOM OF SAUDI ARABIA
Degree Earned: Machine Shop Practices, Standardization and Metallurgy
Date: October 31, 1980 – October 31, 1981
II. DON BOSCO COLLEGE
CANLUBANG, CALAMBA
LAGUNA, PHILIPPINES
Degree Earned: Craftsman Course (Machine shop and
welding)
Date: July 1972 – July 1973
III. LAGUNA COLLEGE OF BUSINESS AND ARTS
CALAMBA, LAGUNA
PHILIPPINES
Degree Earned: Secondary Education
IV. JOSE RIZAL MEMORIAL SHOOL
CALAMBA, LAGUNA
PHILIPPINES
Degree Earned: Primary Education