Maintenance Customer
Resume:
Carlton C. Perry
Pinetops, NC 27864
Phone 252-***-****
Fax 252-***-****
E-mail actgnv@r.postjobfree.com
Objective
To become a valuable team member with your organization while, at the same time, improving life for my family.
Employment
Areotek
Elights
Elm City, NC.
Nov 2015 to Jan 2015
Solar Installer
Pay 12.00
Installed solar panels, did plug and play, QC, DC whips, DC leads into vaults(confined space)
Sputnik AKA Captain America 3
Pinewood Studios
Fayetteville Ga.
April-29th 2015 to May-22nd 2015
Propmaker
Pay 26.01
Build Flats and set props, using pneumatic nail guns, pneumatic crown staplers, hammers, table saws, jig saws, skill saws, saws alls, impact screw guns, scissor lifts.
Billy Lynn's Long Halftime Walk
Atlanta Ga.
April-4th 2015 to April-28th 2015
Propmaker
Pay 26.01
Fabricate doors, windows; rework old shutters to fit new application. Build Flats and set props, using pneumatic nail guns, pneumatic crown staplers, hammers, table saws, jig saws, skill saws, saws alls, impact screw guns, plainer. Help set wall in place.
Michelle Darnell
Atlanta Ga.
Mar. 2015 to April-3rd 2015
Propmaker
Pay 26.01
Build Flats and set props, using pneumatic nail guns, pneumatic crown staplers, hammers, table saws, jig saws, skill saws, saws alls, impact screw guns, scissor lifts. Went on set to build set before filming, worked on set during filming on standby to fix any problems that may have come up during shoots.
MC2 Exhibit Shop
500 Interstate Pkwy
Lithia Springs,GA
Dec. 2014 to Jan 2015
Exhibit Builder
Pay 21.00
Build exhibits for trade shows using table saws, nail & staple guns, chop saws, applying laminate to exhibits. Build platforms and cubicles with wood and or aluminum structure tubing. Going by blueprints and instructions from leadman.
King Bolden
Mill shop/propmaker
June 2014 to Oct. 2014
Pay 26.00 to 26.78
Fabricate doors, windows, rework old shutters to fit new application. Build Flats and set props, using pneumatic nail guns, pneumatic crown staplers, hammers, table saws, jig saws, skill saws, saws alls, impact screw guns, plainer. Help set wall in place.
Satisfaction
May 5 to May 24, 2014
Propmaker
Pay 24.37
Build Flats and set props, using pneumatic nail guns, pneumatic crown staplers, hammers, table saws, jig saws, skill saws, saws alls, and impact screw guns. Set walls, ceilings, and headers in place.
FF7 Productions
100 Universal City Plaza
Universal City, CA 91608
March 3 2014 to March 28 2014
Propmaker
Pay $25.50
Build Flats and set props, using pneumatic nail guns, pneumatic crown staplers, hammers, table saws, jig saws, skill saws, saws alls, impact screw guns, scissor lifts. Went on set to build set before filming, worked on set during filming on standby to fix any problems that may have come up during shoots.
Graham/Welex Incorporated
200 Industrial Blvd.
Greenville, NC 27834
Pay $13.00 to $25.38
September 2007 to Feb 2014
Sheet Line/Extruder Mechanic
Lead Mechanical Assembly
Building machinery for the plastic industry from blue-prints and schematics using a variety of hand tools, electric drills; making high pressure hoses, cutting, threading steel pipe from inch to 2 inch; bending, flaring, and installing steel tubing to make hydraulic lines, lay-out, drill and tap holes not in material but on blue-print; design, cut, and weld steel to make jigs and tools for the purpose of building the sheet lines; weld with MIG welder and cut with plasma cutter; use cranes to install polish rolls, static baths, pull rolls. Later moved up to Lead Mechanical Assembly in 2012 .
Cotton Belt Inc.
401 East Sater Street
Pinetops, NC 27864
Pay $8.00 to $10.05
March 2005 to August 2007
Maintenance
Maintenance Department of a small, privately owned company. Duties included vehicle and heavy equipment repair and operation, general carpentry and plumbing repair on company owned rental property, grounds and building maintenance. Repair and/or replacement of manufacturing equipment.
Austin Construction Co.
6820 Sissonville Drive
Charleston, WV 25320
Pay $9.10
2004 to 2004
Carpenter
Worked as general carpenter for company remodeling new Texas Steakhouse & Saloon restaurant. Job duties included all types of general carpentry, painting, staining, building door frames, installing doors, LED signs, etc. This was a temporary job due to West Virginia location of company’s home office.
New World Productions
June 2004 to July 2004
Greens Crew
Pay $21.13
Worked for motion picture company on the Greens Crew. Job duties included transplanting plants of all types, digging up weeds and replanting on the sets, running water pumps for irrigation, clearing and removing underbrush and thorn bushes from locations for sets, drive tractors. Work using hoes, shovels, and putting in place enviro-logs to hide concrete foundation on the beach.
Joe’s Designer Cabinets
7211 Cedar Grove School Loop Rd.
Nashville, NC 27856
Pay dependent on job
2002 to 2004
Cabinet Builder Assistant
Job duties included assisting in the building of custom cabinets, cutting materials to build, building and installing drawers, assisting with installing cabinets
Suit Construction Co.
201 East McBee Ave.
Greenville, SC 29601
Pay $17.00
2001 to 2002
Millwright Helper
Job consisted of bringing in and setting up equipment for companies. Job duties required climbing, some welding, and assembly; assist in placing equipment in proper location based on blue prints, erecting steel frames for flooring or platforms for people and/or equipment. Tools used varied from ratchets, sockets, wrenches, screw drivers, chalk lines, port-a-powers, JLG man lifts, calipers, micrometers, indicators, safety harnesses, levels, etc.
Ilco Unican
400 Jeffreys Rd.
Rocky Mount, NC 27804
Pay 9.00 to $12.24
1997-2001
Various Jobs
Form Grinder
Manufacture milling cutter form tools using a surface grinder and mylars to tolerances of .005 of an inch keeping the form to the mylar, manufacture cutters from M42 steel, and various parts for machines in the plant. Made precision quality gauges to tolerances of .0002 of an inch, while holding the proper form from a mylar.
Back-off Lathes
Manufacture milling cutters from M42 blanks and stamping identification on each cutter, then heat treating them and checking Rockwell hardness to make sure within specs. When times were slow I had to polish coining
dies, heat treating coining dies, turn down old cutter blanks to smaller reusable size, manufacturing parts for other various machines in the plant using milling machines, lathes, surface grinders, drill presses and various hand tools.
Walter Grinder HMC 400-CNC grinding machine used to make milling cutters out of carbide blanks to tolerances of .005 of an inch using form wheels. Duties also included reshaping and sharpening reamers, drill bits, and specialty cutters, some remanufacturing of cutters to new sizes and specs.
Standard Products Co.
1040 Dozier Rd.
Rocky Mount, NC 27801
Pay $5.80 to $14.10
1981 to 1996
Various Positions
Material Handler
Supplied employees with the various supplies needed to do their jobs, keep the work area clean and neat, and remove finished products from the floor and take to shipping.
Mold Operator
Run transfer and injection molds to a set standard of production while keeping quality standards to specs.
M.E.C. (Material Equipment Coordinator)
Job duties consisted of placing employees in proper places and supplying with needed materials to perform duties, perform basic preventative maintenance on molds, mold presses, dies, die presses, check stock on comparator to mylars, solve basic mechanical problems on molds, mold presses, dies, and die presses, keeping everything in tolerance to customer’s orders and quality control charts (SPC charts). Sometimes filling in for mold operators and toggle operators that were absent to keep customer quantity at a level to prevent air shipments from having to be made.
Mold Technician
Performed preventative maintenance on molds, pull and repair molds to customer specs, use milling machines, lathes, drill presses, TIG welders, surface grinders, calipers, micrometers, height gauges, hand tools, files, profilers, high speed hand grinders, check and reset as needed the parameters on injection presses, check the die cuts to make sure they were to spec. Check stock to mylar for proper dimensions and set up and run new product modules, make customer samples and pack for shipping.
Education
August 1985
Edgecombe Technical College
GED
December 11, 1995
Mold Design Technology
Standard Products Co.
November 25, 1997
Computer Numerical Controls
Ilco Unican Co.
May 4, 1999
Basic Machining Level 1
Nash Technical College
August 9,1999
Basic Machining Level 2
Nash Technical College
February 24, 2009
Blue Print Reading 1
Pitt Community College
April 4, 2009
Basic Welding
Pitt Community College
References
Marvin Raynor
Co-worker
Less Jackson
Boss
Joe Harper
Boss
Summary of qualifications
I have worked a variety of jobs making my experience broad and extensive. I have done quite a bit in the manufacturing field as well as in the construction field, which helps in the set up and operations of manufacturing equipment and process while keeping the products in quality parameters and the customer’s parameters.I am a dedicated and loyal employee and enjoy working hard and seeing the fruits of my labor
Contact this candidate