JAY PEE ROBLES AGUIRRE

Lumut, Seria, Kuala Belait, Negara Brunei Darussalam

Mobile # : +673-***-****

Email Address : actf9r@r.postjobfree.com

SKILLS

Knowledgeable in MICROSOFT OFFICE, ADOBE PHOTOSHOP, AUTOCAD 2D/3D MAX, DCS / PLC PROGRAMMING. Initiative, responsible, goal oriented, organized, hard working and easy to be with.

CAREER OBJECTIVE

To be able to apply and enhance my knowledge and skills obtained from my previous job and experiences. To contribute and share whatever I know and to work with others as a team.

WORK EXPERIENCES

ELECTRICAL / INSTRUMENTATION SUPERVISOR

(Projects/Turn-Around/Commissioning/Shutdown/Operations & Maintenance)

Mashhor Group of Companies Sdn. Bhd.

Land Reliability Maintenance & Construction Division

Client: BRUNEI SHELL PETROLEUM

Seria, Kuala Belait, Brunei Darussalam

November 4, 2014 - Present

Duties and Responsibilities

Responsible for E-Permit application under BSP (ISSOW) system.

Responsible for site visiting and technical evaluation prior for work commencement.

Responsible for the material checking as per (AFC) Approved for Construction drawings.

Responsible for E&I tie-in works monitoring and execution.

Responsible for E&I expansion & upgrading works.

Responsible for commissioning works and activities and vendor assistance.

Responsible for safe execution of work and safety of E&I team.

Responsible for the development of as-built drawings and coordinates/discuss to the client representative.

TECHNICAL ASSIST ENGINEER (LEVEL III) - INSTRUMENTATION and CONTROL

D.M. Consunji, Inc. (INSTRUMENTATION and CONTROL SYSTEMS DEPARTMENT)

1X15 MW COAL FIRED POWER PLANT (GE OC 6000e Nexus)

Semirara, Caluya, Caticlan, Philippines

April 7, 2014 June 30, 2014

Duties and Responsibilities

Responsible for detailed engineering, preparation of specifications for various field instruments.

Responsible for preparation of junction box termination detailing, cable scheduling, hook up drawings and P&ID reviewing.

Responsible for project monitoring and supervision of sub contractors daily, weekly work load and scheduling and man power distribution.

Responsible for supervision of ITP Instruments and Test Plan for the whole plant, conduit and cable routing lay-out, cable tray installation, instruments tapping points and impulse line tubing, control valves and MOVs.

Experienced of DCS / PLC handling, checking, software and hardware installations and function blocks programming.

Responsible for material handling, monitoring and issuance to the contractors.

INSTRUMENTATION SUPERVISOR (Operations & Maintenance)

Green Future Innovations Incorporated

IBEC (Isabela Bio-Ethanol Co-Generation) Plant

Brgy. San Mariano, Isabela, Philippines

June 18, 2012 August 10, 2013

Duties and Responsibilities

Responsible for monitoring plant operation.

Responsible for supervising instrument team while servicing and trouble shooting of instruments (Flow, Pressure, Temperature, Level, Analyzers, Valves).

Responsible for coordinating with other departments before and after servicing of instruments.

Responsible for the safety of the instrument team.

Responsible for planning and allocating of work to everyone on the team.

Responsible for purchasing, checking of delivered instruments and accessories.

Responsible for assessing, giving suggestions and technical solutions while working.

Responsible for ensuring safety work place and tools.

Responsible for leading/assisting on technical issues while trouble-shooting and fault-finding.

Responsible for proper handling of PLC and DCS system in the plant. (GE Fanuc, Allen Bradley, MELSEC Q and YOKOGAWA Centum VP)

Responsible for guiding and providing technical support for valve dismantling and positioner / motorized-valve troubleshooting.

Responsible for guiding and providing technical support in trouble shooting of Turbine Control Panel and boiler / Electro-Static Precipitator operation.

Coordinates with other supervisors to ensure smooth operation of the plant.

ELECTRICAL / INSTRUMENT TECHNICIAN (Shutdown Maintenance)

Japan Gas Corporation

Rio Tuba Nickel and Mining Plant, Line 1 (Palawan)

Client: Coral Bay Nickel Corporation

Rio Tuba Nickel and Mining Corporation

Rio Tuba, Bataraza, Palawan, Philippines

April 25, 2012 June 6, 2012

ELECTRICAL / INSTRUMENT TECHNICIAN (Commissioning)

Japan Gas Corporation

IBEC (Isabela Bio-Ethanol Co-Generation) Project

Client: Green Future Innovations Incorporated

Brgy. San Mariano, Isabela, Philippines

January 16, 2012 April 25, 2012

INSTRUMENT TECHNICIAN (LEAD Construction & Commissioning)

KENTZ Madagascar SARL

AMBATOVY Project (Nickel Cobalt Refinery)

Client: SNC Lavallin, DMSA, SHERRITT

Toamasina, Madagascar, South Africa

May 24, 2011 Nov. 16, 2011

ELECTRICAL / INSTRUMENT TECHNICIAN (LEAD Construction)

AG&P (Atlantic, Gulf and Pacific Company of Manila)

Client: British Petroleum Coker Whiting NICKEL Refinery Project

Foster Wheeler USA Corporation

Bauan, Batangas City

June 17, 2010 April 30, 2011

INSTRUMENT TECHNICIAN

I&E Industrial Systems Services Inc.

Client: First Gas Power Corporation & SIEMENS, Sta. Rita, Batangas City

SHELL Philippines, Tabangao, Batangas City

788 Takad, Libjo, Batangas City

August 16, 2009 April 7, 2010

Duties and Responsibilities as E/I Technician:

Responsible for the installation / calibration of thermocouple and RTD.

Responsible for the loop checking of installed instruments from field to junction boxes and to DCS.

Interprets electrical drawings, symbols and schematic diagrams (P&ID s), instrument loop diagram.

Responsible for the calibration of pressure gauges and pressure switches.

Responsible for simulation of temperature transmitter using DRUCK DPI 620, FLUKE 712 CALIBRATOR and DECADE RESISTANCE BOX.

Responsible for control valve stroking (0%-100%) and ON-OFF Valves.

Responsible for testing of cable point-to-point from panel to instrument using fluke multi-meter.

Responsible for simulation of level transmitter (RADAR / ULTRASONIC type) using HART 475

Responsible for calibrating level (radar/ultrasonic/vibrating/capacitive Endress Hauser);

Pressure (diaphragm, orifice plate Rosemount);

Flow (magnetic, Corioles Endress Hauser);

Temperature (RTD Pt100 Rosemount) and analyzer (conductivity/Ph Yokogawa, H2S Draeger) instruments.

Responsible for calibrating PSV, PCV, FCV.

Responsible for installation of vendor instruments.

Responsible for conducting commissioning works.

Responsible for tuning of process controllers.

Responsible for the making of instruments maintenance service reports.

Responsible for servicing all instruments, analyzers; (YOKOGWA. ROSEMOUNT, SIEMENS, ENDRES HAUSER, YU TECH, PRAJ, MERU, etc.)

Responsible for servicing solenoid valves and control valves & positioners, (FISHER, ELO-MATIC, SIEMENS, FORBES-MARSHALL, etc.)

Practice good manners, companionship and safety while working.

CAD (Computer Aided Design) DESIGNER

WS ATKINS and PARTNERS OVERSEAS

Bank St., Bur Dubai, Dubai, U.A.E.

August 10, 2008 up to March 1, 2009

Duties and Responsibilities

Responsible for cleaning of drawings architectural base to be used as reference for the landscape base.

Responsible for the drawing of the landscape base.

Responsible for the making/enhancement of drawings from the design team (architects).

Responsible for the calculation of the hardscape (paving) and softscape (planting) areas.

Responsible for making of detailed design drawings. Plan, elevations, sections of planters, water features, paving design and general plan sections.

Responsible for the setting up of the general arrangement plans, hardscape plans, planting plans, levels plan, setting out plans and lighting plans.

Responsible for the printing and checking of drawing plan sets.

QA / QC ENGINEER (Hull and Tank Coating)

Keppel Batangas Shipyard, Inc.

Brgy. San Miguel, Bauan, Batangas

November 6, 2006 May 15, 2008

TECHNICAL SERVICE REPRESENTATIVE / COATING ADVISOR

(Hull and Tank Coating)

SIGMAKALON Philippines, Inc.

Unit 103 Gr. Flr. Don Tim Bldg., 5438

South Superhighway, Bangkal, Makati City

May 8, 2006 October 30, 2006

Duties and Responsibilities

Coordinate in the VSCC meetings for the whole day and night painting and blasting activities.

Responsible for the re calculation of quantity of paints for a given area.

Check all necessary items like lightings, emergency signboards, work permits and air supply for safety measures.

Check and inspect washing condition of the substrate prior for blasting.

Inspect the blasting standard and do necessary chloride and salinity tests.

Check the paints / quantity to be used before application.

Check the thickness of the paint after application.

Responsible for the making of the reports and other paper works for the blasting / painting activities.

Ensure / check the condition of the painted surface prior for final inspection / owner s

WORK ACHIEVEMENTS

Mashhor Group of Companies, Sendirian, Berhad

Land Reliability Maintenance and Construction Division:

Brunei Shell Petroleum

D.M.Consunji Inc.

1x15 MW Semirara Coal Fired Power Plant

Green Future Innovations, Incorporated:

IBEC (Isabela Bio-Ethanol Cogeneration Plant)

JGC Philippines:

Client: Green Future Innovations Incorporated

IBEC PROJECT (Isabela Bio-Ethanol Co-Generation Plant)

Client: Coral Bay Nickel Corporation

Rio Tuba Nickel and Mining Corporation (Line 1)

KENTZ SARL Madagascar:

Client: SNC Lavallin, SHERRITT, DMSA, KORES

AMBATOVY PROJECT (Nickel-Cobalt Refinery)

AG&P:

Client: FOSTER WHEELER USA Corporation

British Petroleum Coker Whiting Nickel Refinery Project

I&E Industrial Systems and Services Inc.:

Clients: First Gas Power Corporation(SIEMENS), SHELL Pilipinas Petroleum

WS ATKINS & PARTNERS OVERSEAS:

Palm Jebel Ali Crescent E (Preliminary Design)

Marriot Al Ain (Hotel and Residential)

Palm Gateway Towers

Dubai Metro Depot

Flagship Campus & Al Furjan American School

Sheth Tower

Dubai Promenade (Channel Towers)

Keppel Batangas Shipyard Inc. and Sigma Kalon Philippines:

ENSCO 8500 SEMI SUBMERSIBLE PONTOON (Oil Rig)

(PORTSIDE / STARBOARDSIDE)

GLOBAL SANTE FE DRILLER III SEMI SUBMERSIBLE (Oil Rig)

(PORTSIDE CENTER PONTOON)

ENSCO 8501 SEMI SUBMERSIBLE PONTOON (Oil Rig)

(PORTSIDE / STARBOARDSIDE)

QUEIROZ GALVAO OIL and GAS (B-296) (Oil Rig)

(PORTSIDE / STARBOARDSIDE)

TANK NOS. 4, 7, 78, Shell Philippines, Tabangao, Batangas

MAUBAN POWER PLANT, Mauban, Quezon

TRAININGS ATTENDED

TRAININGS DATE

Electrical Safety Rule (BSP Module 10, Rev. 7.0) April 22-23, 2015

Brunei Shell Learning Hub

Confined Space Entry (In-House Training) April 13, 2015

Mashhor Group of Companies Sdn, Bhd. Office

Integrated Safe System of Work (ISSOW) Feb. 25, 2015

Brunei Shell Learning Hub

Permit To Work 1 ( Permit to Work for Supervisor) Jan. 28 - 29, 2015

Megamas Training Center

Permit To Work 2 (Managing Hazards at the Workplace) Jan. 27 - 29, 2015

Megamas Training Center

Provide First Aid Jan. 6 - 8, 2015

Megamas Training Center

Integrated Management System - 5 Dec. 17-18, 2014

(Competent Frontline Worksite Supervisor)

Megamas Training Center

First Aid Training, Basic Life Support June 26-27, 2012

Training & Search & Rescue

5 S Oct. 24, 2012

Working at Heights and Scaffolding Oct. 13, 2012

Safety In-House Training

Health Safety and Environmental Leadership Sept. 11, 2012

Training and Workshop

Fire Prevention & Basic Fire Fighting June 25, 2012

Self Contained Air Breathing Apparatus April 28, 2012

Computer Aided Design and Drafting April 24, 2008

Introduction to PLC Technology

Using SIEMENS Simatic S7-200 PLC July 15, 2005

EDUCATIONAL BACKGROUND

Tertiary : Bachelor of Science in COMPUTER ENGINEERING

De La Salle University (Lipa)

Mataas na Lupa, Lipa City

S.Y 2001 2006

PERSONAL INFORMATION

Date of Birth : June 25, 1984

Place of Birth : Bauan, Batangas

Status : Married

Sex : Male

Height : 5 7 1/2

Weight : 75 kgs.

Citizenship : Filipino

Passport No. : EB4127238

CHARACTER REFERENCES:

Fadzil HJ. Ahmad

Senior Construction Engineer

Brunei Shell Petroleum

+673-***-****

Mohd. Zulkarnaen HJ. Zunaidi

Permit Issue Point Coordinator

Brunei Shell Petroleum

+673-***-****

James Mendoza

Engineer - MGC/Land Reliability Maintenance & Construction

+673-***-****

OTHER INFORMATIONS AND DOCUMENTS WILL BE PRESENTED UPON REQUEST.

I hereby certify that the above information is true and correct to the best of my knowledge.

JAY PEE R. AGUIRRE

Applicant

Contact this candidate