Muhammad Imran Akhter
SENIOR ENGINEER
ELECTRICAL DESIGN
MOBILE
PHONE
acsmla@r.postjobfree.com
SKYPE: Imranakhter100
Passport: CE1343912
Http:
www.linkedin.com/ Muhammad imranakhter
ADDRESS
Ward No. 6, House No.365
KotAddu, MuzaffarGarh. Punjab. Pakistan
GENDER
Male
DATE OF BIRTH
15th August 1983
NATIONALITY
Pakistani
CAREER OBJECTIVE
To work for a reputed organization which fosters a competitive environment and where personal growth and career enhancement is encouraged.
QUALIFICATIONS
Degree in Electrical Engineering from University of Engineering and Technology Lahore
PEC Certified Professional Engineer
ACHIEVEMENTS
Design and Project Management
Successfully Designed Electrical system for following Projects:
DHDS, PARCO
Makori (MOL),
ADHI-III (PPL)
Demir Dagh(Oryx) in Iraq
BP Kirkuk Baba, BP in Iraq
Operation Eastern Reach, Coastal Energy in Thailand (Off Shore)
Completed technical evaluations of equipments:
Gas Turbines Generation
HV and LV Switchgear
UPS and Charger
Cables
Transformers
Power Management System
Supervised various projects including installation & commissioning of HV/LV switchgear panels, interlocking schemes, verification of Electrical schematic and control system drawings, Start/Stop and Trip interlocks, auxiliary systems etc.
Maintenance
Prepared FEED of 132KV Bay extension projects at 02 plants of PARCO.
Performed complete protection coordination study of electrical protection.
Prepared and implemented a well reliable earthing system for telecom sector
Prepared a 30 Years Business Plan for Siemens
Prepared an energy saving plan for PARCO stations of Shikarpur and Fazilpur.
Prepared a plan to store Optimized spares at proper locations for maintenance.
Prepared a PM plan which reduced CM of equipments.
Prepared, updated and reviewed SOP’s for electrical maintenance
Prepared and inventory of spare parts for Ware House.
ABILITIES
Detailed Design
Hands on Abilities of more than 5 years for Detailed Design, sizing, preparing data sheets, specifications RFQ’s and Tech. Evaluation of:
Power Generation Requirement.
Switchgear
Transformer
Cables
UPS
Motors
Hands on Abilities for preparation following deliverables:
Load List
Cable Schedule
Single Lind Diagram
Hazardous Area classification Drawing
Earthing, Cable and Lighting Layouts
Earthing, Lighting, Power and Bulk MTO
Schematics and Control Diagrams
Interconnection Diagrams
DB and JB Design and Layout Drawings for shop fabrication
Ability to review Bid documents to prepare technical Bid
Ability to perform ETAP Studies for Load Flow, Short Circuit, Relay coordination and Motor Starting studies for simulated results
Lighting Studies using Dialux
Maintenance
More than 4 years of experience as an Electrical Engineer in Maintenance of following equipments:
220KV and 132KV Grid Station equipments i.e. CVT, Isolators, CT’s, PT’s, SF6 breaker, Surge arrestor, Power Transformer
SF6 Circuit breakers
Power Transformers
HV and LV Switchgear and MCC
UPS and Charger
HV and LV motors
Deep understanding of preventive maintenance procedures and methods
Proven ability to work in difficult situations with Strong analytical and problem solving skills furnished with Extensive experience of project management
Hands on experience of using following equipments :
Transformer Oil Di-electric Strength Test Equipment,
Transformer Oil filter Machine,
Micro Ohm Meter,
Cable fault Locator,
Meggar etc.
PROFESSIONAL EXPERIENCE
DRAKKEN, April 2014- Present
www.drakken.co
Senior Engineer electrical Design
Being an Electrical design lead, I am involved in preparation of all documents related to basic and detailed engineering phases in domain of Electrical System Design.
1.Proposals
Successfully prepared and submitted following proposals:
Grey Owl, Newalta in Canada
Stubb Creek, Petrofac in Nigeria
Swara Tikka, Schlumberger in Iraq
Oil Serve Yadavaran, ENI Zubair in Iraq
Prepared MTOs for Lighting, Earthing and Power
Estimated Man-hours for Proposals.
Material Take OFF MTOs of Earthing, lighting, cables, bulk etc.
2.Projects
Successfully completed following projects in Detailed Engineering:
Demir Dagh, Oryx in Iraq
BP Kirkuk Baba, BP in Iraq
Operation Eastern Reach, Coastal Energy in Thailand (Off Shore)
Presson Descon International Pvt Limited PDIL, May 2012 –April 2014
www.pdil.com
Senior Engineer Electrical Design
Being an electrical design lead, had been involved in technical documents preparation for proposal, engineering activities of project and preparation / reviewing of engineering deliverable of electrical for Basic and detail engineering.
1.Proposals
Successfully prepared and submitted following proposals in Pakistan:
ADHI-III, PPL (Awarded as Project)
GAMBAT SOUTH, PPL (Awarded as Project)
SARA West Gas Field, OGDCL
MELA, OGDCL
Prepared BOQ’s/ MTO’s of lighting, power and earthing layouts.
Prepared Technical Evaluation of Vendor Quotes
Manpower Estimation of project
Prepared design Basis, data sheets for proposals
2.Projects
Successfully completed following projects in Detailed Engineering:
MAKORI, MOL project of Makori GPF EPCC Project with 20000 BPD Oil, 10000 BPD Condensate, 150 MMSCFD Gas, 450 MTon/day LPG Handling Capacity
ADHI-III, PPL project with handling capacity of 30MMSCFD LPG, and 5330 BPD Oil
Prepared Vendor Quotes evaluations of following:
Generator (Gas Turbines, Gas and Diesel Generator
Switchgear
Transformer
UPS
Cable
Prepared Specifications and Data sheets of equipments Gas and Diesels engines, MV or LV switchgear, UPS, transformers, cables etc.
Prepared Sizing Calculations for following:
Power Generation Source including Gas Turbine Driven and Engine Generation System
Diesel Generator
Power and Distribution Transformer
LV and MV Switchgear
AC and DC UPS
Coordinated project activities with other design disciplines, with client personnel and with vendors for vendor item Packages.
Pak Arab Refinery (PARCO), March 2008 – May 2012
www.parco.com.pk
Electrical Engineer
I had been working as in-charge of S&T Maintenance (Electrical) in PARCO and completed following tasks:
1.Maintenance
Successfully achieved Maintenance of following Electrical Equipments without LTA:
220 & 132KV Grid Stations (Isolators, CT’s, CVT’s, PT’s, SF6 breakers, SA, Power Transformers)
LV, MV and HV switchgears and Motors
UPS
Lighting
Carried out following Power/Distribution Transformer Tests:
TTR (Transformer Turn Ratio) Test
Megger
Winding Resistance Test
Short Circuit Test etc
Successfully performed relay testing using Secondary Current Injection Test Sets(SEVERKER, ISA, Model DRTS-6 ) of following relays:
Over Current Phase / Earth Fault Relay,
Differential Relay
Synchrocheck Relay,
Motor Protection Relay
Reverse Power Relay
Under / Over voltage Relay
Power factor Relay
Organized electrical maintenance activities to maximize plant availability.
Achieved minimum plant breakdown through
Proper planning and preventive maintenance of equipments.
Proposed an improvement plan for the electrical distribution system of existing facilities.
Prepared and managed Electrical Maintenance budget.
Prepared, updated and reviewed Job Plans, Work Instructions and SOP’s for electrical maintenance.
Prepared design package, Scope of work, BOQ, conceptual drawings and tender documents for electrical related plant modifications.
Prepared technical specifications for spare parts & evaluate the received offers.
Maintained ware house inventory of Electrical
Designed and implemented control and protection schemes for different feeders, substations and Grid stations.
2.Project Management
Planned, Designed and supervised the projects 132 KV Grid Stations
Successfully completed installation, testing and commissiong of LV/MV/EHV switchgear panels, Transformers, 132 KV grid station equipments, protection relays, energy meters etc for system improvement and redundancy.
Successfully issued following detailed engineering calculations and drawings for DHDS project
Single Line Diagrams
Lighting, earthing and Power layouts
Schematic Diagrams
Cable schedules
Identified and set short and long term plans for DHDS project.
Prepared FAT and SAT procedures of equipments.
ORASCOM Group of Companies, Jan 2007 –March 2008
www.otelecom.com
Electrical Engineer
Successfully performed Operation/ Maintenance of following without LTA:
Gensets (Alternator and Generator)
ATS Panel and Distribution Panel.
UPS and Rectifiers (Delta and Emerson).
Firefighting system and fire alarm system (Kilsen + Zeta).
Stulz Air Conditioners and Split Air Conditioning System.
Earth testing.
Electrical Power, air conditioning and environmental issues.
Troubleshooting of Circuit and Replacement of Electrical Components.
Siemens Pakistan Pvt Ltd, Feb 2006 –Jan 2007
www.siemens.com.pk
Trainee Electrical Engineer
Visited Sites on client’s request to diagnose and rectifying problems on the basis of inspection and then finally submission of detailed study report.
Completed short circuit study, harmonic analysis, and protection coordination studies for clients of textile sector.
Designed electrical system diagram for clients.
Prepared a business plan by collecting data of Siemens equipments like CB’s, CT’s, PT’s, etc. from all public and private clients and visiting their sites particularly substations.
EDUCATION
Bsc Electrical Engineering (Power), December 2005
University of Engineering and Technology, Lahore Pakistan
CERTIFICATIONS
Pakistan Engineering Council, June 2006
TRAININGS
1.Gas Plant Commissioning by HCMD PDIL
2.Introduction to Oil and Gas Processing by MDC DESCON
3.Moving Up The Ladder by HCMD PDIL
4.Maintenance Management by PIMS Karachi
Comprehensive training on Management of Plant Maintenance
5.Power System Protection by Siemens
Detailed Ideas of Power System Protection
6.Emergency Response Team by PARCO HSE
To help fire crews in case of any emergency in plant.
7.IEC & NFPA codes by PARCO HSE
For hazardous area classification.
8.ISO standards by PARCO HSE
Familiarized with ISO9000, ISO14001 & ISO18001.
9.Work permit procedures by PARCO HSE
Authorized by PARCO safety department as work permit issuer.
10.Evacuation & first aid by PARCO HSE
Familiarized with evacuation equipments like SCBA, half face mask, safety harness.
11.Work at height by PARCO HSE
Carried out by PARCO safety department.
12.Firefighting system by PARCO HSE
Prevention, detection, fighting & suppression by utilizing Deluge valve systems, fire alarm system, fire extinguishers, fire/flame detectors, FM200 fire suppression system, familiarized with fire fighting equipments including fire tenders.
COMPUTER SKILLS
Autocad
ETAP
Dialux
SAP
MAXIMO
ORACLE
Microsoft Office(MS Word, MS Excel, MS PowerPoint)
Engineering Software: MATLAB
LANGUAGES
Read
Write
Speak
English
Excellent
Excellent
Excellent
Urdu
Excellent
Excellent
Excellent
REFERENCES
Shaukat Ali chaudhri Saifullah Khan
Manager Chief Engineer
Presson Descon International Pvt Ltd Pak Arab Refinery
acsmla@r.postjobfree.com acsmla@r.postjobfree.com
+92-321- 4062604 +92-300- 6865200