Mr. HWAN MO, CHO /Senior Instrumentation & Control Engineer

Professional Objectives:

To utilize my knowledge and 23 years of experiences for Instrumentation & Control System Engineering (with construction & commissioning ) including electrical engineering at Doosan Heavy Industries, and Doosan Engineering & Services, LLC in USA (New Jersey). EPC(Engineering, Procurement and Construction) and Boiler provider of project ; Fossil Power plants, Oil fired power plant, Combined cycle Plants, Retrofit upgrade design, etc.

In preparation of PE License (Control System) – Delaware Education :

Bachelor of Science, BS Electrical Engineering, University of Kyoungpook in Korea

/ 1992. 3

National Certification :

- Korea National Certification of Electrical Work (1st Grade)

- Korea National Certification of Engineer Electricity (1st Grade)

- Korea National Engineer Fire Fighting Facilities (Mechanical part, 1st Grade)

- Korea National Engineer Fire Fighting Facilities (Electrical part, 1st Grade) Special Education :

Siemens DCS (Teleperm XP) at Karlsruhe, Germany (DCS : Distributed Control System) ABB DCS(Procontrol P) at Mannheim, Germany

Honeywell BMS (SMS) at Singapore (BMS : Burner Management System, SMS: Safety Management System)

Worley Parsons (Engineering) at Reading (PA), USA

Areas of Expertise :

Instrumentation design for the plants; Fossil Power plants, Combined cycle, combustion turbines, Boiler system, Furnace system, plant utilities, Plants retrofit upgrade design and Digital upgrade DCS System for power plant. I&C plant Computer system, Turbine Digital control interface. Directly involved in Construction and Field start-up Test & commissioning for coal fired & combined cycle power plant especially.

Distributed Control System; Design DCS Control system, Siemens DCS(Teleperm XP & T3000), ABB/Bailey(Harmony platform, Procontol -P), Yokogawa (Centum VP) including safety system(VMR), Emerson (Ovation), Honeywell (SMS, TDC3000 & Experion)

Field instrumentations equipment selection; Bills of Material list, cost estimates & customer interface, schedule budgeting and project technical design documentations, and Review vendor prints & documentations.

Electrical interface design work (Transformer, SWGR(Switchgear), MCC(Motor Control Center, UPS(Uninterruptible Power System), Battery, SCADA(Supervisory control and data acquisition system), etc)

Review of single line diagram, schematic diagram

Cable & conduit pipe engineering

Design Installation documentations; PFD(Process & Flow diagram, P&ID(Piping and instrument diagram) /Schematics, Instrumentation control loops & control logic diagrams, data sheets, DCS I /O list. Technical Specification, EPC documentations; Central Control room equipments design, DCS/HMI(Human man machine interface), Operator workstation, Software & hardware upgrades, Hardware selection for PLC

(Programmable logic control) &DCS.

Plant instrumentation equipment and PLC Cabinets installations, Field Instrumentations calibration, loops checkout, test out and commissioning of the control systems.

Power plant operation; Control room operation, start-up operations, Field Maintenance, Faults troubleshooting equipments and commissioning the power plants. SUMMARY OF EXPERIENCE:

Years of experience in the field of instrumentation and controls project engineering & electrical engineering. Involved in numerous Coal & Oil fired project and combined cycle project, retrofit, installation for power generator plants, and equipment replacement projects; worked with turbines control, Boiler control System(Alstom : tangential firing and Bobcok : front and rear firing), Power Generation Combined Cycle & Simple Cycle Plants, Combustion Gas turbines, Steam Turbine.

Projects EPC Engineering activities: procurement material, vendor evaluation, engineering, FAT(Factory Acceptance Test), construction sites work, technical support

& control system checking for power plants at site.

Machinery protection of Vibration Monitoring system. Fire protection system, Air Quality control, CEMS (Continuous Emission Monitoring System) &, Analyzers,Transmitters, Gauges,levels,flow, temperature, pressure, speed, vibration, Control valves, ph control, Interlocks, MOV(Motor operated valve) and Motors control. PLC cabinets design, Hardware assembly,configuration system. Electrical heat racing design.

Interface design with electrical engineering (single line diagram, schematic diagram, transformer, Switchgear, MCC, UPS, Battery, SCADA, etc)

Preparation of Cable connection diagram & cable routing design

Various safe related electrical protection panel design

Projects Distributed Control System DCS: Design work on Honeywell TDC-3000 System, ABB /Bailey DCS, Yokogawa DCS, Emerson Ovations, SCADA System. PLC Allen-Bradley, Siemens T3000 &TXP, HMI graphics display, configuration and troubleshooting.

Bus technology like OPC(Open process control), Foundation Field bus, Ethernet TCP/IP DCS System. Interfacing with SCADA system, Control communication network, design of HMI and DCS system. Redundant network use Fiber optical cables network.

GE Mark V & VIe with Speedtronic Control & Woodward control system, Siemens Gas

&Steam turbines, SKODA Steam Turbine. Centrifugal Compressors for Process Air,. Plant rotating machinery Motors, Pumps, Fans & Steam Turbines.

Plant control system design, implementation, balance of plant, Boiler/Turbine, HRSG(Heat recovery steam generaor), Boiler combustion. Vendor drawing Review, EPC Construction, Pre-commission, startup procedures, schedules and project commissioning.

Trained employees on plant control instrumentations, startup Shutdown emergency procedures, maintenance practices for plants, outage plan and start-up plant. Experience with electronic testing equipment, calibration in workshop & site, Field I&C loops checking, Control valves checking, Cabinets design for DCS& PLC, protection control panel hardware wiring.

Preparing process instrumentation specifications, process I/O list, cabling diagrams; one line diagrams .conduit & cables routing, wiring diagrams, schematics design,principle& description documents, layout drawings, power distribution high & low voltage, technical documentations, process instrument and flow loop diagrams

(P&IDs &PFD).loop diagrams, Schematic SAMA(SCIENTIFIC APPARATUS MANUFACTURERS ASSOCIATION) & Boolean control logic diagrams, Digital I&C design engineering. Design analog, digital sensors instrumentation, I&C systems testing, I&C equipment installation and commission.

Various FAT inspection (DCS, BMS(Burner Management System), HP(High pressure)/LP(Low pressure) bypass system, Control Valves, Field Instrumentation, etc) Work Experience :

Doosan Heavy Industries & Co. Ltd 05/2015 ~ Current Multi-Project Involved as a EPC Scope

- Seoul CCPP (1x1x1, 2 Block, 400MW) – EPC

- Hwasung Dongtan CCPP (1x1x1, 2 Block, 400MW) - EPC

- Karabatan CCPP (Kazakhstan) (2x2x1, 2 Block) – EPC

- VT4 TPP (Once-through type coal fired boiler, 600MWX2) – EPC

- Songhau TPP (Once-through type coal fired boiler, 600MWX2) – EPC

- Semangum TPP (CFB, 150MW X2) – EPC

- Botswana (Africa) retrofit Project

Others : Proposal project work.

Doosan Heavy Industries & Co. Ltd 09/2013 ~ 04/2015 Site construction and commissioning work at MD II project (Vietnam) as a I&C Engineering Manager, Direct involved a cold and hot commissioning test Doosan Heavy Industries & Co. Ltd 07/2013 ~

09/2013

IEC Add on project site commissioning execution (at Ramat and Hagit project, Israel) Doosan Heavy Industries & Co. Ltd 05/2013 ~ 07/2013 Site construction and pre commissioning execution at Raipur site (India) Doosan Heavy Industries & Co. Ltd 04/2013 ~ 05/2013 Simulator FAT execution (Yokogawa Australia, Sydney) for Raipur Project

(Boiler, BOP and STG) / Virtual Type Simulator

Doosan Heavy Industries & Co. Ltd 02/2013 ~ 04/2013 Engineering of Raipur Project (685 MW x 2 units, coal fired once through type) in India Doosan Engineering & Services (New Jersey in USA) 08/2008 ~ 01/2013 Leader of Instrumentation and Control / Electrical department for Coal fired & Combined cycle power plant . Below is a part of execution ;

Execution project :

Doosan Engineering & Services (New Jersey in USA)

1. Raipur Project (685 MW x 2 units, coal fired once through type) in India, 2. MD II project (560 MW x 2 units, coal fired sub critical type) in Vietnam, 3. IEC Add on project(three(3) sites (combined cycle) in Israel

- Ramat ( 1 x 1 x 1) : GT (Siemens), ST(SKODA), HRSG(Doosan), ACC(GEA in Germany) (GT : Gas Turbine, ST : Steam Turbine, ACC : Air Cooled Condenser)

- Hagit (1 x 1 x 1) : GT (Siemens), ST(SKODA), HRSG(Doosan), ACC(GEA in Germany)

- Eshkol (1 x 1 x 1) : GT (Siemens), ST(SKODA), HRSG(Doosan), Water Cooled Condenser (by Doosan)

1) Raipur Project (685 MW x 2 units, once-through type/supercritical) in India,

Directly responsible for the proposal, contract, engineering, purchasing, construction document, training and making a test procedure. (Worked primarily on EPC Major Projects)

Implementation and configuration of plant including boiler /turbine controls and all other balance of plant

Also responsible for Yokogawa DCS (Centum VP and BPS(Boiler protection system) system(VMR)).

Responsible for Various package system interface with DCS

Directly involved in generating for start-up & shutdown procedure (plant start up and shutdown procedure and curves, chemical cleaning procedure, steam blow out procedure, Hydro test procedure, various system commissioning procedures as a role of Engineering Manager for project

Successfully completed all assigned projects which included.

Key feature of engineering for three(3) BFPM(Boiler Feedwater pump motor) (Voricon Type), 60% HP/LP Bypass system, House Load Operation, Design criteria, plant control configuration diagram, cable principle diagram, Automatic plant start up and shutdown logic

(APS), UMC(Unit Master Control), BOP(Balance of Plant) logic and Loop Diagram with macro, material purchasing specification (MPS) for all instrumentation and control equipment including DCS, coordination to other discipline (Mech/Elec/Civil/piping), etc.

Completed DCS FAT

Review of electrical document(single line diagram, schematic diagram, MCC, transformer, SCADA system, short circuit diagram, cable & conduit/tray, duct bank for C&I design 2) MD II project (560 MW x 2 units, Drum type/subcritical) in Vietnam,

Directly responsible for the engineering, purchasing, construction document, training and making a test procedure. (Worked primarily on EPC Major Projects)

Implementation and configuration of plant including boiler /turbine controls and all other balance of plant.

Also responsible for Yokogawa DCS (Centum VP and BPS system(VMR))

Responsible for DCS and various package system interfaces

Directly involved in generating for plant start up and shutdown procedure and curves

Key feature of engineering for two(2) BFPM (Voith Coupling Type), 60% HP/LP Bypass system, House Load Operation, Design criteria, plant control configuration diagram, cable principle diagram, Automatic plant start up and shutdown logic (APS), UMC(Unit Master Control), BOP logic and Loop Diagram with macro, material purchasing specification (MPS) for all instrumentation and control equipment including DCS, coordination to other discipline

(Mech/Elec/Civil/Piping) and other company (EVN/PRP/Various package system suppliers)

Project activities to oversee, Labor hour estimation, budgeting, project scheduling

Make all type of project I&C documents and drawings

Review of electrical document(single line diagram, schematic diagram, MCC, transformer, SCADA system, short circuit diagram, cable & conduit/tray, duct bank for C&I design 3) IEC Add on project(three(3) sites(Combined cycle plant in Israel);

Leader of Electrical and Instrumentation and control

Directly responsible for contract, engineering, purchasing, construction document, training and making a test procedure. (Worked primarily on EPC Major Projects for steam turbine add on project)

Implementation and configuration of plant including HRSG /Steam turbine controls (SKODA) and all other balance of plant.

Also responsible for ABB DCS (Harmony platform) engineering with ABB Italy

Directly involved in generating for combined cycle start up and shutdown procedure and curves

Successfully completed all assigned projects which included.

Key feature of engineering ; DCS, HP/IP(Intermediate pressure)/LP Bypass system, Reheater, steam turbine, gas turbine, Air cooled condenser, Sea water cooled condenser

(Eshkol project) and all instrumentation and control

Generate and review of Design criteria, plant control configuration diagram, cable principle diagram, Plant Protection Interlock Diagram, Automatic plant start up and shutdown logic

(APS), LFC(Load frequency Control), BOP control logic and Loop Diagram with macro logic, material purchasing specification (MPS) for all instrumentation and control equipment including DCS, technical vendor evaluation.

Project activities to coordinate a multi-disciplined engineering team Mech/Elec/Civil/Piping), ensuring that project milestones are met

Project activities to oversee, Labor hour estimation, budgeting, project scheduling

Make all type of project I&C documents and drawings.

Review of generator protection panel and MCC, SWGR, UPS, emergency diesel generator, electrical cable engineering

Doosan Engineering & Services ( New Jersey in USA) 2008.08 ~ 2009.10

Engineering center Set up in USA (Oradel / Montvale in New Jersey) for Doosan Engineering & Services (DE&S): DE&S is a collaboration company with Burns and Roe Engineering Company (USA)

IP Transfer from Burns & Roe engineering

Coordination with Headquater (Doosan)

Proposal project ;

Responsibility for Electrical and C&I discipline

Review ITB, Proposal deviation, cost saving idea generation, material purchasing spec., vendor proposal review, technical proposal specification and drawing, deciding cost for contract, cost review meeting, technical evaluation sheet, technical meeting with Owner and vendor, budget estimation and managing and analysis. 1. Premnagar project in India (660MW x 2, coal fired once through, BOP and Turbine(Toshiba),

2. Safi project in Moroco (660MW coal fired once through, EPC project) 3. Portodo Asu project in Brazil (685MW x 1, coal fired once through, BOP, Boiler(by Doosan Bock), Construction by Skanska, EPC project) 4. Koradi project in India (660MW x 3, coal fired once through, Boiler/BOP/STG by Doosan, EPC project)

5. Raipur project in India (660MW x 2, coal fired once through, Boiler/BOP/STG(Steam turbine generaor) by Doosan, EPC project)

6. Internship (Graduate) Training

Execution project :

Doosan Heavy Industries & Co. Ltd 2007.10 ~ 2008.8

Project engineering, test and commissioning at Hadong unit 7&8(Coal fired Once- through, 519MW x 2 units) – carried out control system engineering, participated in progress review meeting, design review meeting, site construction for instrumentation and control, testing & commissioning at Hadong unit 7 site, tuning of unit master control, feedwater control and various Boiler & BOP control system, assessment and mitigation of project potential risks by reviewing project documents including contracts, design documents, drawing and relevant documents.

Engineering and Design work for Instrumentation & control for the plants; Boiler(Tangential firing) / BOP system, Coordinated with STG(Mark VI) by Doosan, plant utilities, DCS (Siemens Teleperm XP) system, plant Computer system, Annunciation system & Monitoring System.

Field instrumentation equipment selection, Bills of Material list, Cost estimates & customer(KEPCO/KOPEC) interface, schedule budgeting and project technical design documentations and Review of various vendor prints & documentations

Design Installation documentations, PFD, P&ID /Schematics, Instrumentation functional loops & control logic diagrams, data sheets for control valve and field instrumentation, DCS I/O list.

Technical Specification, EPC documentations; Central Control room equipments design, DCS/HMI, Operator workstation, Software and Hardware selection for PLC & DCS

Involvement in Designing field equipments, cabinet/panel designing, Control system design work, I/C Equipment data sheets, cable & Cables routing, cable pulling, control switch operation, Scheduling, prepare I/O List., verification of control schematics, instrument Indexes, Set points list, Instrument and control valves specification, create principle & description documents, layout drawings, functional analysis documents, instrument installation details, create P&IDS documents. Design work for Siemens DCS

(Teleperm XP), wiring Configurations, installation drawing

Review of Electrical and Control systems drawings

Piping and Instrumentation drawing P&IDs and Process Flow diagrams for control and instrumentation requirements, generation of control logic and functional loop diagram, instrument loops and all technical documentations.

CEMS (Continuous Emission Monitoring system), Air Quality Emission control Monitoring System, Analyzers monitoring system and Boiler tube leaks detection monitoring system.

Interferences of Electrical design documents includes one line diagram, Instrument set point calculation, Process data sheet, schematic and physical drawing, technical bid evaluation and reports. Industry electrical design equipments.

FAT test procedures of the SW and HW testing before delivery, supervision of installation, commissioning of I&C equipments, procurements purchasing material.

Field Instrumentations calibration, loops checkout, test out and commissioning of the control systems.

Supervisor at site for electrical work

Commissioning tuning (Unit master control, feedwater control, deaerator level control and Boiler loop control such as furnace control/Hot and Cold air damper control, BMS/SQC(Sequence Control), Boiler) control, HP/LP bypass control tuning, and various BOP control loop.

Two(2) BFPT (Boiler feed water pump turbine) and one(1) variable speed BFPM Doosan Heavy Industries & Co. Ltd 2008.1 ~ 2008. 08

Engineering Manager, Coordinator and Engineer - Project coordination on Youngwol CCPP(Combined cycle power plant) projects (900MW x1) in Korea – carried out reviewing project documents including contracts, design documents and drawing and relevant documents.

Doosan Heavy Industries & Co. Ltd 2006.04~2008.01

Project proposal, contract, engineering and purchasing, construction & commissioning at Boryeong unit 7&8 as a Boiler Provider (Coal fired Once-through, 550MW) – carried out proposal, project contract and engineering, participated in progress review meeting, design review meeting, site construction, testing & commissioning at Boryeong unit 7 and 8 site, as built drawing, assessment and mitigation of project potential risks by reviewing project documents including contracts, design documents, drawing and relevant documents.

Engineering and Design work for Instrumentation & control for the power plant; Boiler / BOP system, Coordinated with STG(Mark VI) control system, DCS (Siemens Teleperm XP) system. I&C Annunciation system & Monitoring System. Field site construction support and Field I&C start-up Test & commissioning including tuning, cold, warm, hot, restart up & shutdown test & report, Load swing / governor free test & report.

Field instrumentation equipment selection, Bills of Material list, Material Cost estimates

& customer(KOMIPO/KOPEC) interface, schedule budgeting and project technical design documentations, and Review of various vendor prints & documentations

Design Installation documentations, PFD, P&ID /Schematics, Instrumentation functional loops & control logic diagrams, data sheets for control valve and field instrumentation, DCS I/O list.

Technical Specification, EPC documentations; Central Control room equipments design, DCS/HMI, Operator workstation, Software and Hardware selection for PLC

&DCS.

Involvement in Designing field equipments, cabinet/panel designing, Control system design work, I/C Equipment data sheets, Cable & Cables routing, cable pulling, Scheduling, prepare I/O List.

verification of control schematics, instrument Indexes, Set points list, Instrument and control valves specification, create principle & description documents, layout drawings, functional analysis documents, instrument installation details, create P&IDS documents. Design work for Siemens DCS (Teleperm XP), wiring Configurations, installation drawing, documentation and commissioning.

Review of Electrical and Control systems drawings and Plant arrangement drawings .

Cable connection diagram design, interface work with Transformer, UPS, MCC,etc.

Cable and conduit pipe routing design

Piping and Instrumentation drawing P&IDs and Process Flow diagrams for control and instrumentation requirements,logic and instrument loops and all technical documentations.

CEMS (Continuous Emission Monitoring system), Air Quality Emission control Monitoring System, Analyzers monitoring system and leaks detection monitoring system.

Interference to Electrical design documents includes one line diagram, specification, Instrument set point calculation, Process data sheet, schematic and physical drawing, technical bid evaluation and reports.

FAT test procedures of the SW(Software) and HW (Hardware) testing before delivery, supervision of installation, commissioning of I&C equipments, procurements purchasing material.

Field Instrumentations calibration, loops checkout, test out and commissioning of the control systems.

Commissioning & tuning (Unit master control, feed water control, deaerator control and Boiler control loop & BMS/SQC(Boiler) control), HP/LP bypass control tuning, etc) the power plants.

Two(2) BFPT and one(1) constant speed BFPM(Boiler feedwater pump motor) Doosan Heavy Industries & Co. Ltd 2004.10~2005.10

Yeonghunng 1&2 (800MW coal fired once through type )

Proposal design - review ITB(Invitation to Bid), generating proposal specification and design guide

Review of Plasma firing design

Emerson(Ovation) DCS

Doosan Heavy Industries & Co. Ltd 2004.10~2007.10

Project proposal, engineering and commissioning at Dangjin unit 7&8 as Boiler provider (Coal fired Once-through, 519MW) – carried out proposal, project contract, and engineering, participated in progress review meeting, design review meeting, site construction support, testing & commissioning at Dangjin unit 7 and 8 site, assessment and mitigation of project potential risks by reviewing project documents including contracts, design documents, drawing and relevant documents.

Engineering and Design work for Instrumentation & control for the plants; Boiler, Coordinated with STG(Mark VI), DCS (Siemens Teleperm XP) system. Interface to Turbine Controls (Doosan), Field site support & commissioning including tuning, cold, warm, hot, restart up & shutdown test & report, Load swing test & report..

Field instrumentation equipment selection, Bill of Material list, Cost estimates & customer(KEPCO/KOPEC) interface, schedule budgeting and project technical design documentations, and Review of vendor prints & documentations

Design Installation documentations, PFD, P&ID /Schematics, Instrumentation functional loops & control logic diagrams, data sheets for control valve and field instrumentation, DCS I /O list.

Technical Specification, EPC documentations; Central Control room equipments design, DCS/HMI, Operator workstation, Software and Hardware selection for PLC

&DCS.

Involvement in Designing field equipments, cabinet/panel designing, Control system design work, I&C Equipment data sheets, Cable & Cables routing, cable pulling, Scheduling, prepare I/O List.

Verification of control schematics, instrument Index, Set points list, Instrument and control valves specification, create principle & description documents, layout drawings, instrument installation details, create P&IDS documents. Design work for Siemens DCS

(Teleperm XP), wiring Configurations, installation drawing, documentation

Review of Electrical and Control systems drawings and Plant arrangement drawings .

Review of key one line diagram, schematic diagram, etc.

Piping and Instrumentation drawing P&IDs and Process Flow diagrams for control and instrumentation requirements,logic and instrument loops and all technical documentations.

Design & review (with vendor) of CEMS (Continuous Emission Monitoring system), Air Quality Emission control Monitoring System, Analyzers monitoring system and leaks detection monitoring system.

Interferences to Electrical design documents includes one line diagram, specification, Instrument set point calculation, Process data sheet, schematic and physical drawing, Technical bid evaluation and reports.

FAT test procedures of the SW and HW testing before delivery, supervision of installation, commissioning of I&C equipments, procurements purchasing material.

Field Instrumentations calibration, loops checkout, test out and commissioning of the control systems.

Supervisor at site for electrical work including below commissioning work

Commissioning tuning (Unit master control, feed water control, deaerator control and various Boiler loop control & BMS/Boiler SQC control), HP/LP bypass control tuning, BOP loop control) the power plants.

Doosan Heavy Industries & Co. Ltd 2004.01~2004.04

Dangjin unit 3&4 (500MW x2 units, coal fired once through type) APS test report with Bailey DCS control system

Doosan Heavy Industries & Co. Ltd 2002.01~2006.10

Project proposal, project contract, engineering and commissioning on Dangjin unit 5&6 as a Boiler provider (Coal fired Once-through, 519MW) – carried out proposal, project contract and control system engineering, participated in progress review meeting, design review meeting, site construction support, testing & commissioning at Dangjin unit 5 and 6 site, assessment and mitigation of project potential risks by reviewing project documents including contracts, design documents, drawing and relevant documents.

Engineering and Design work for Instrumentation & control for the plants; Boiler, Coordinated with STG(Mark VI) supplied by Doosan/GE, DCS (Siemens Teleperm XP) system. Interface with steam turbine Controls, I&C plant Computer system, I&C Annunciation system & Monitoring System. Field site support and Field I&C start-up Test & commissioning including tuning, cold, warm, hot, restart up & shutdown test & report, Load swing test / load runback /Governor free operation & report.

Field instrumentation equipment selection, Bill of Material list, Cost estimates & customer(KEPCO/KOPEC) interface, schedule budgeting and project technical design documentations, and Review vendor prints & documentations

Design Installation documentations, PFD, P&ID /Schematics, Instrumentation functional loops & control logic diagrams, data sheets for control valve and field instrumentation, DCS I/O list.

Technical Specification, EPC documentations; Central Control room equipments design, DCS/HMI, Operator workstation, Software and Hardware selection for PLC

&DCS

Involvement in Designing field equipments, cabinet/panel designing, Control system design work, I/C Equipment data sheets, Cable & Cables routing, cable pulling, Scheduling, prepare I/O List. verification of control schematics, instrument Indexes, Set points list, Instrument and control valves specification, Specification, create principle & description documents, layout drawings, functional analysis documents, instrument installation details create P&IDS documents. Design work for Siemens DCS (Teleperm XP), wiring Configurations, installation drawing, documentation and commissioning.

Review of Electrical and Control systems drawings and Plant arrangement drawings .

Piping and Instrumentation drawing P&IDs and Process Flow diagrams for control and instrumentation requirements,logic and instrument loops and all technical documentations.

CEMS (Continuous Emission Monitoring system), Air Quality Emission control Monitoring System, Analyzers monitoring system and leaks detection monitoring system.

Interference check with Electrical design documents includes one line diagram, specification, Instrument set point calculation, Process data sheet, schematic and physical drawing, technical bid evaluation and reports.

Interface design switchgear, MCC, transformer, UPS, etc. cable & conduit/tray design.

FAT test procedures of the DCS SW and HW testing before delivery, supervision of installation, commissioning of I&C equipments, procurements purchasing material.

Field Instrumentations calibration, loops checkout, test out and commissioning of the control systems.

Start-up operations, Field Maintenance, Faults troubleshooting equipments, and commissioning tuning (Unit master control, feed water control, deaerator level control and Boiler control loop & BMS/Boiler SQC ), HP/LP bypass control tuning, BOP control loop) the power plants.

DANGJIN 5&6 Simulator ((Emulation Type) with Yokogawa(Techcomm) Directly involved in Simulator documentation and all test at site Boiler/BOP control, Test report

Doosan Heavy Industries & Co. Ltd 1999.01~2001.12

Design and Architecture Engineering participation on Coal Fired Thermal Power Project – carried out for instrumentation and control system

Active and effective participation in Design Standardization task force team for design documents, drawing and relevant documents.

Inland & Overseas proposal project for Coal, Oil fired thermal power plant, co- generation plant

Hadong Unit 4 ~6 (500MW x 2 units, coal fired once through type ) APS test report with Siemens Teleperm-ME DCS control system

Operator Training Simulator proposal for Samchonpo thermal power plant (Coal fired drum type, 500MW x 2) including electrical panel simulator Doosan Heavy Industries & Co. Ltd 1998.08~1998.12

Active

Contact this candidate