C.Mahesh, M.Tech.

SF. */*** Father Duraisamy Enclave,

Mathuvarayapuram Post, Thombilipalayam

Coimbatore – 641 101

Mobile No : 978-***-****

Email : acsg4u@r.postjobfree.com

OBJECTIVE

Looking for a Challenging Position of Senior Embedded Developer where I can put My knowledge and skills into Practice and Create a Winning Team through Hard Work and Dedication.

SUMMARY

Developing Real Time Data Recorder, Developing Data Acquisition Card, GUI Development, Embedded Programming for Peripherals, Embedded Programming for Communication Protocols, Designing Signal Conditioning Circuits for Sensor Interfacing.

SKILL SET

LANGUAGE :

Assembly, C, Embedded C, RTOS Basics, LabVIEW, MATLAB Basics, VHDL Basics, and Ladder Logic.

MICROPROCESSOR :

8085, 8086

MICROCONTROLLER :

8051 Core - AT89C51, AT89S52, AT89C55W, P89V51RD2

AVR Core - ATmega16, ATmega128, ATmega328

ARM7 Core - LPC2148, LPC2378

MSP430 Core - M430G2553

MICROCONTROLLER BOARDS:

MCB51, MCB2140, MCB2300, Arduino UNO, Arduino Mega, Arduino Due, MSP430 Launch Pad, TMS320C6747 DSP Development Kit,lpc2378 Trainer kit,lpc2148 Trainer kit, Raspberry pi.

FBGA BOARDS:

Spartan-2E, Spartan-3E, Vertex-II pro - (Basics Only)

LabVIEW DATA ACQUISITION CARD :

USB 6008, NI myDAQ, SBRIO, SPEEDY33, NI ELVIS, NI myRIO

PLC MODULE:

OMRON SYSMAC CPM1A

COMMUNICATION PROTOCOLS:

RS232, I2C, 1 Wire, SPI, TCP/IP(LabVIEW), USB(Basics), CAN(Basics)

PERIPHERALS :

ADC, DAC, PWM, Counter/Timer, RTC, UART, I2C, Interrupt, Watchdog Timer

INTERFACING :

PPI, RAM, E2PROM, SD Card, ADC, DAC, RTC, LCD, GLCD, Touch Screen

WIRELESS COMMUNICATION MODULES:

RF Transceiver, Xbee, BT, GSM, GPS

SENSORS:

Strain Gauge, RTD, Thermocouple, pH, IR, Hall Effect, Accelerometer, Gyroscope, Touch Screen, PPG, ECG

EDUCATION

Course Details

Marks Secured

%

Year of Passing

Institution Details

History of Arrear

M.Tech(Embedded Systems)

75.6

2013

Karunya University, Coimbatore

1(Maths)

B.E(Electrical & Electronics Engineering)

73

2009

Einstein College of Engineering, Tirunelveli

1(Maths)

Diploma(Electronics & Communication Engineering)

86

2006

MSPVL Polytechnic College, Pavoorchatram, Tirunelveli

Nil

+2(Maths Biology)

69.45

2003

West Tirunelveli Higher Secondary School, Nallur, Tirunelveli

SSLC

76

2001

PART TIME EXPERIENCE – 5 YEARS

COMPANY :

Tamilvani Electrical & Electronics Pvt Ltd.

No: 146, 7th Ward, Santhana Mariyamman Kovil Street,

Alangulam, Tirunelveli District – 627851.

PERIOD : May 2004 – April 2009

WORK ASSIGNED:

oTesting Electrical and Electronic Components and Equipments

oElectrical Wiring for House and Office

oCable Network Installation

FULL TIME EXPERIENCE : (2+2.3) 4.3 YEARS

1.COMPANY:

PG Embedded Systems Pvt Ltd.

No: 197B, Surandai Road, Pavoorchatram, Tirunelveli – 627808.

PERIOD : 1st June 2009 – 28th May 2011

WORK ASSIGNED :

oConducting Training Program On Microprocessor & Microcontroller for Engineering College Students.

oConducting Workshops On Basic Electronics, Microprocessor, Microcontroller Programming in Polytechnic and Engineering Colleges.

oDesigning and Development of Embedded System Based Projects for Engineering College Students.

2.COMPANY:

Pantech ProED Pvt Ltd.

2nd Floor, Sai Sruthi Complex,

No: 5, Ramarkoil Street, Ram Nagar, Coimbatore – 641009.

PERIOD : Since 15th July 2013

WORK ASSIGNED :

oDesigning Signal Conditioning Circuits for Sensor Interfacing.

oDeveloping Data Acquisition Card & Interfacing Module with LabVIEW Compatibility

oDesigning Products for Client Requirement.

oEmbedded Programming for Peripheral Configuration.

oDeveloping GUI in LabVIEW for Plant Monitoring.

CURRENT PROJECT :

TITLE : Design and Development of Virtual Oscilloscope for low power Data Acquisition Card

CLIENT : Laxmi Automation Pvt Ltd., Coimbatore.

DURATION : 6 Months

DESCRIPTION : Designing the Embedded hardware with 2 Analog Inputs. Here the hardware has to program to acquire the signal with the sampling rate of 48 MS/S and direct the samples

serially with 115200 baud rate to the software which has the virtual functionality of Oscilloscope developed in LabVIEW platform.

PREVIOUS PROJECTS :

1.TITLE : Development of Wireless Embedded Teaching & Learning Pad.

CLIENT : SRI Electronics and Embedded Solutions, Coimbatore.

DESCRIPTION : An Embedded device designed with digital slate and an audio input using ARM7 lpc2378 Microcontroller. It has programmed to acquire the audio signal and user handwritten. It will be directed to all the device of same type which has connected to it.

MY TASK : Developing an Embedded code to configure the On-Chip UART0 of lpc2378 Microcontroller to 19200 baud rate and Configure the On-Chip ADC of lpc2378 Microcontroller to sample the audio signal with the sampling frequency of 8KHz.

2.TITLE : Designing GUI for Controlling Pick and Place Robot.

CLIENT : Appin Technology Lab., Coimbatore.

DESCRIPTION : A Pick and Place Robot with 2 DOF has assembled with 2 stepper motors and one servo motor. Initially it has controlled through a joystick along with a push button with the help of Microcontroller. To replace the joystick a GUI has developed in LabVIEW platform for Virtual Joystick functionality.

MY TASK : Developing an Embedded code to configure On-Chip USART of ATmega16 Microcontroller for 115200 baud rate to receive the control word from the Virtual Joystick.

3.TITLE : Intelligent Motion Controlled Robot Using PID Controller.

CLIENT : Sun Industrial Automation and Solutions, Chennai.

DESCRIPTION : A 3 wheel line follower vehicle has used for the transportation of crusher powder. This unable to work properly due to the crusher dust. So that the deviation in the parallel wheel has measured using hall effect sensor, based on the drift in the wheels the control signal has generated by PID algorithm to run the vehicle straight.

MY TASK : Developing Embedded C code to configure the On-Chip PWM peripheral of ATmega16 Microcontroller to generate the variable duty cycle to run both wheel in the same speed to avoid the drift in the movement.

4.TITLE : Design and Development of low cost USB powered Digital I/O Card with LabVIEW

Compatibility.

CLIENT : Axis Engineering Automation, Chennai.

REQUIREMENT : Designing of an Embedded device with 24 Digital I/O and it has to program to get configure from the LabVIEW tool to control the drive directions.

MY TASK : Entire Design.

I have designed an Embedded device with 24 Digital I/O and USB powered facility using P89V51RD2 Microcontroller and MCP2200 USB to UART converter. Here the Microcontroller has programmed to interact serially with VISA based drivers in LabVIEW tool with the baud rate of 115200 to send and receive the control word for I/O configuration.

PERSONAL :

AGE : 29

DOB : 17/5/1986

MARRITAL STATUS : Married

NATIVE ADDRESS : S/O P.Chellappa

CV Cottage, 5th Cross Street, Ambai Road,

Alangulam, Tirunelveli District – 627851.

DECLARATION :

I hereby declare that all the details made above are true to the best of my knowledge and belief.

By,

C.Mahesh, M.Tech

Embedded Developer.

Contact this candidate