Shakhawat Hossain, P. Eng

*** ******* **** ******, ** Tel: 1-403-***-****(H), 587-***-****(C),

Calgary, AB, T3G 4E9 Email: acs7go@r.postjobfree.com

Objective

Lead / Sr. Piping and Pipeline Engineering position in an EPCM or in the oil and gas industry.

Summary of Qualifications

Registered Professional Engineer with APEGGA.

Mechanical Engineer with over 15 years of solid background in design of pipeline, piping, pressure vessels and tanks, detail engineering, fabrication, pre-commissioning & commissioning, and inspection in oil and gas production facilities, petrochemical and fertilizer plants.

Specialized in FEED studies, DBM, detailed engineering, and suggest necessary changes.

Experienced in developing piping material specification and piping class based on information received from material engineer.

Experienced in sizing of pipe, calculation of pipe wall thickness, branch reinforcement pad and miter bands, hydrostatic pressure test, and hoop stress at hydro test pressure as per code.

Experienced in performing Fitness for Service (FFS) assessment for pressure vessels, piping and tanks by manual calculation and VCESAGE Software.

Prepared data sheet, RFQ, technical BID evaluations and clarification, RFP and Vendor documents review and approval for piping, piping components, and specialty items, pressure vessels and tanks.

Knowledge in liquid and gas hydraulics in pipeline.

Familiar with strict compliance with quality assurance and quality control procedures.

Conversant in using codes and standards such as ASME B31.3, B31.1, B31.4, B31.8, ASME Sec. VIII, Sec. V, SEC IX, API 620, 650, CSA Z662, Z245.11, Z245.12, MSS SPNACE and company’s standards and references.

Well aware of Health, Safety and Environmental procedures and implementing HAZOP recommendation.

Expertise in regulatory compliance and design registration with ABSA and AER.

Computer background includes: CAESAR II, MS project, CMMS, CPM, MS word, MS Excel, MS Power Point.

Education

M. Eng in Mechanical, 2009, University of Calgary, Alberta, Canada

Bachelor in Mechanical Engineering, 1986, Bangladesh University of Engineering and Technology (BUET)

Professional Experience

Lead, Piping Engineer January 2013 to till to date

TR Canada Inc.

Client: i. CNRL, Project: VDU, DRU and HSU of Phase II - January 2013 to Till Today.

ii. NWR Sturgeon Refinery- Unit 50: Light End Recovery and Unit 60: Amine and Sulfur

Recovery, Sour Water Stripping - March 2014 to Till Today.

iii. Fort Hills Cogen- September 2014 to Till Today

1.Supports Project Engineering and ensure quality deliverables in time.

2.Supervising, coordinating, guiding and distributing works to piping material engineering, stress analysis and designer group to ensure quality deliverables in time based on priority.

3.Interface with subject matter expert and obtain technical input as required.

4.Coordination and interaction with drafting in the preparation of design drawings.

5.Performing calculation of wall thickness, branch reinforcement, test pressure and vacuum calculation.

6.Reviewing and approving piping class specification for the project.

7.Reviewing and approving purchase specification of pipe, its components, piping specialty items and then RFQ, BID evaluations, attending pre-award meeting with supplier, reviewing RFP and checking vendor documents.

8.Ensure quality of the deliverables, times and progress at different phase of the project.

9.Checking LDT input such as hydrostatic test pressure, WT, MDMT, ABSA requirement, PWHT Requirements, RT requirement from piping engineering point.

10.Reviewed plot plan, provide input, confirming incorporating comments from clients and finally stamped and signed.

11.Reviewing, stamping and signing project deliverables such calculation of Pipe wall thickness, vacuum calculation, hydro-test pressure, branch reinforcement, ABSA registration process documents, stress analysis report, piping GA drawing, layout drawing, detail drawing and piping isometric drawing.

12.Attending meeting with inter department and client subject matter expert.

Senior Piping Material Engineer August 2011 to January 2013

AMEC, Calgary, Canada

Client Name: CNRL, Project Name: Extraction Phase 2

Performed calculation for piping WT, Branch reinforcement, Blind Flange, Closure, External pressure (Vacuum), Hydrostatic test pressure, Hoop stress at hydrostatic test pressure and developed excel work sheet for the calculations.

Prepared valve list as per piping class for the client.

Prepared CCO Spool list, assigned SP Tag number and drawing number, calculated wall thickness for CCO Spool pipe considering dilution thickness, interacted with the designer to develop drawing for CCO Spools, checked drawing, stamped and signed and finally delivered to the vendors for fabrications.

Filling LDT input required column such as piping WT, inspection requirements, PWHT requirements, ABSA, and Hydrostatic test pressure.

Developed purchase specification, data sheets and packages for bulk piping, piping components & fittings and piping specialty items.

Reviewed piping material and piping class.

Issued RFQ package, circulated the package for IFS within company and IFR to client and incorporated all comments, finalized package, issued for bid, asked clarification to bidders and evaluated the bids, reviewed vendor drawing and documents.

Provided Response to RFI to vendor, clients, and contractors.

Attended weekly meeting and provided the latest status.

Senior Mechanical Engineer March 2011 to August 2011

Suncor Energy Inc, Fort Mcmurray, AB, Canada, Project Name: Upgrader U1 and U2

Support turnaround activities with respect to engineering requirements especially on pre, during and post Turnaround for exchangers, vessels, tanks, piping, and heaters.

Develop, review and approve inspection scopes, repairing scope and scope of works for replacement and upgrade.

Perform fitness for service assessment for heat exchangers, pressure vessels, tanks and piping based on present condition, engineering judgments, and code calculation.

Participate and provide key input for the planning, execution, CFT, SPD and major project to make sure critical technical issues are resolved in a timely fashion.

Respond to request for information (RFI) documentation

Generate, review and approve Technical Deviation Notice (TDN) and Turnaround Change Notice (TCN)

Ensure application of latest international standard as well company’s Standards and design codes.

Develop purchasing specifications, requisitions and review vendor technical documents.

Review and approve GC’s repair procedures.

Ensure regulatory bodies requirements are met and liaise with regulatory bodies in the resolution of compliance requirements. .

Participate in Root Cause Failure Analysis (RCFA).

Senior Mechanical Engineer November 2010 – March 2011

Vale, Thompson, Manitoba, Canada

Support Operations and Maintenance with respect to engineering requirements especially on stream, pre, during and post Turnaround.

Performed FFS for piping and tanks.

Reviewed and performed Initial Assessment of Engineering Requests (ERs) issued by Operations Department.

Prepared technical feasibility report of ERs, cost estimate, performed basic engineering such as specification development, get quotations from vendor, evaluated quotation and handed over it to plant operations for the procurement of pipe, tanks, pumps modification or new installations.

Performed hydraulic and mechanical design for piping, and selection of piping material.

Senior Mechanical Engineer June 2008 – May 2009

WorleyParsons Calgary, AB, Canada, Client’s Name: Imperial Oil Resources, Upstream Alliances

Studied and reviewed scope of works, input to FEED, DBM and Detailed engineering of pipeline and facility project.

Performed calculation thickness of pipeline and piping, branch reinforcement, hydro test pressure and hoop stress at hydro test and checked the limitation in hydro test pressure.

Selected crossing methods for rivers, creeks, roads and rail roads based on geotechnical information, hydrological and environmental considerations.

Performed material selection for static equipment, tanks, pipeline, piping, and specialty items.

Performed review of P&IDs, PFDs, line lists, pipeline plan view and isometric drawings.

Prepared bill of materials and preliminary cost estimates of small project.

Prepared manual valves list and piping material specification.

Developed specialty items data sheets and shop pipe bend specification.

Performed IDR of P&IDs and issued IFC Package.

Performed all procurement activities such as issuing RFQ, RFP, reviewed and evaluated offers from different vendors, asked for clarifications, checked and reviewed vendor documents for pipe, standards fittings, specialty items, valves, compressors, pumps etc.

Ensured project deliverables and project requirements are met in timely.

Prepared construction work package for the Construction contractor.

Responded RFI issued during construction and issued MOC as required.

Attended project meeting, and constructability meeting with clients.

Familiar with ABSA registration requirements.

Mechanical Engineer November 2006 – August 2007Saudi Aramco, Shaybah Expansion Project (Client Company of SNC Lavalin), Calgary, AB, Canada

The project was designed to increase capacity from 500MBCD -750 MBCD of stabilized oil with GOR of 1800 SCF/STB and 30% water cut (Cost: USD 2.4 Billion)

Performed and reviewed technical specification, GA drawing, detailed drawing and documents for pressure vessels, piping and tanks.

Reviewed design calculation of static equipment using Compress Software.

Participated and facilitated bid evaluation and clarification, technical and kick-off meeting.

Checked calculation of piping thickness, branch reinforcement, hydro test pressure and hoop stress at hydro test pressure as per code.

Reviewed piping materials and accessories including flanges, gaskets, tees, elbows etc. as per codes and company’s standards.

Reviewed line list, line class, valve lists, accessories items and specialty items.

Reviewed and made necessary changes in P & IDs and PFDs and recommended updates accordingly.

Reviewed different procedures WPS, PQR, PWHT, Hydrostatic test, NDE, HIC Test, Painting and coating for different static equipment.

Ensured each reviewed documents complied with Company Standard and International Standards.

Senior Assistant Manager Mechanical December 1993 – April 2006

Karnaphuli Fertilizer Company Ltd. (KAFCO), Chittagong, Bangladesh, is the largest joint venture Multinational Chemical Fertilizer Complex producing liquid ammonia and granular urea.

Supported Operation and Maintenance with respect to engineering requirement especially on stream, pre-turnaround, on turnaround and post turnaround inspection requirement.

Prepared and reviewed technical specification and design calculation, GA drawing, detailed drawing for pressure vessel and tanks as per applicable codes and standards.

Calculated thickness of piping, branch reinforcement pad, hydro test and hoop stress at hydro test.

Reviewed material for static equipment, tanks, piping and specialty items.

Prepared and reviewed procedures for WPS, PQR, PWHT & Hydro test procedure for KAFCO Plant.

Witnessed installation, commissioning, and testing of pressure vessels such as boilers, heat exchangers, separators, columns, reactors, stripper, scrubber, tanks and piping.

Prepared mechanical punch list compiling with P & IDs of different plants.

Experienced in planning, scheduling of maintenance, inspection and project activities for 6 (six) scheduled turnaround, regular time, and emergency situation.

Prepared and implemented predictive and preventive maintenance programs.

Maintained Equipment history for future references.

Performed fitness for service assessment for pressure vessels, piping and tanks based on code calculation, engineering judgments and recommended remedial action, replacement schedule with future recommendation.

Selected major equipment for scheduled turnaround.

Mechanical Engineer December 1987 to November 1993

Zia Fertilizer Co. Ltd and Jamuna Fertilizer Co. Ltd under Bangladesh Chemical Industries Corporation (BCIC)

Supported Operations, Maintenance and Technical Services with respect to engineering requirement.

Supervised installation, commissioning, and testing of pressure vessels including boilers, heat exchangers, separators, columns, reactors, stripper, scrubber, tanks and piping.

Supervised maintenance and inspection activities to diagnose equipment problems.

Analyzed root cause of failure and suggested remedial action with future recommendation for pressure vessels, piping and tanks.

Estimated spare parts requirement for the overhauling and general maintenance of equipment and prepared budget for the next year.

Maintained equipment history for future reference.

Training Attended

SPED Level IV

Safety Trainings: H2S Alive, H2S & Hydrocarbon Gases IOR, Gas Testing IOR, Construction Safety Training System, Fall Protection, and Emergency First Aid & CPR.

Contact this candidate