TIMOTHY J. COLES
HAMILTON, ONTARIO
L8P-4V5 acrx75@r.postjobfree.com cell 289-***-****
CAREER SUMMARY
Enthusiastic, self-motivated individual who has many years of Nuclear and ICI experience. Experienced in planning Multi-Million dollar Projects from conception to completion.Excellent knowledge in ASME and CSA Codes.Many years of experience in procuring,fabrication and installation of Mechanical,Piping and Civil systems.
PROFESSIONAL EXPERIENCE
ES Fox OPG Darlington Nuclear
Site Superintendent/Construction Manager OCT 2012-Present
Coordination and supervision of all trades.Scheduling of all work as per Integrated schedule.Coordination of service work required to complete work(ie, scaffolding,insulation etc.).Coordination and ordering of material required to perform and complete the work.Coordination with Quality Control for inspections of hold points on Inspection Test Plans.Perform estimates on bid packages for new work scopes.Attend high level meetings on work performance and schedule compliance.Coordination and scheduling of NDE as required per code.
Comstock Canada,Sudbury Ont.
Project Manager May 2011-OCT 1 2012
Coordination and supervision of all UA & all trades.Scheduling of all work as per T zero schedule.Coordination of service work required to complete work(ie, scaffolding,insulation etc.).Coordination and ordering of material required to perform and complete the work.Coordination with Quality Control for inspections of hold points on Inspection Test Plans.Perform estimates on bid packages for new work scopes.Attend high level meetings on work performance and schedule compliance.Coordination and scheduling of NDE as required per code.
Comstock Canada,Hamilton Ont.
Quality Control Sept.2009- May 2011
Control and development of inspection and test plans including welding procedures, NDE requirements, PWHT and testing requirements as per T.S.S.A. Procedures are followed as stated in the Comstock Quality Control Manual. Visual inspection of fitups, root passes, final welds, flange bolt-ups, pressure testing and final client walk downs. Incoming inspection of materials assuring all provide proper mill test reports and Canadian registration numbers. Control of all welders logs, weld and material mapping.
Comstock Canada,Restart Project,Bruce Nuclear-Tiverton,ON
Project Superintendent July 2008 – Aug. 2009
Coordination and supervision of all UA trades.Scheduling of all work as per T zero schedule.Coordination of service work required to complete work(ie, scaffolding,insulation etc.).Coordination and ordering of material required to perform and complete the work.Coordination with Quality Control for inspections of hold points on Inspection Test Plans.Perform estimates on bid packages for new work scopes.Attend high level meetings on work performance and schedule compliance.Coordination and scheduling of NDE as required per code.
Comstock Canada, Restart Project,Bruce Nuclear - Tiverton, ON
Quality Control Manager May 2006 – July 2008
Control and development of inspection and test plans including welding procedures, NDE requirements, PWHT and testing requirements as per T.S.S.A. Procedures are followed as stated in the Comstock Quality Control Manual. Visual inspection of fitups, root passes, final welds, flange bolt-ups, pressure testing and final client walk downs. Incoming inspection of materials assuring all provide proper mill test reports and Canadian registration numbers. Control of all welders logs, weld and material mapping.Coordination and scheduling of NDE required as per ITP.Coordination and supervision of QC inspectors.
Comstock Canada, USLD Project & 2006 Shutdown Esso Refinery - Nanticoke, ON
Quality Control Supervisor November 2005 – May 2006
Control and development of inspection and test plans including welding procedures, NDE requirements, PWHT and testing requirements as per T.S.S.A. Procedures are followed as stated in the Comstock Quality Control Manual. Visual inspection of fitups, root passes, final welds, flange bolt-ups, pressure testing and final client walk downs. Incoming inspection of materials assuring all provide proper mill test reports and Canadian registration numbers. Control of all welders logs, weld and material mapping.
Comstock Canada QC,QC OPG. - Nanticoke, Ontario Unit #7
August-November 2005
QA, QC OPG. Nanticoke Ontario Unit #7
Duties include 100 /o visual inspection on all welding done on site, qualifying welders to welding procedures, documentation and control of CRN's heat number for pipe and fittings, following and completing all Comstock inspection test plans, weld and material mapping, dimensional check on pre-fab spool pieces, following procedures for all N.D.E. requirements, documentation for all T.S.S.A. Code required pressure tests and completing final turnover packages for client.
Cornstock Canada QC, QA Ferrero Canada Project - Brantford, Ontario
June 2005
Duties include initial generation of inspection and test plan, provide documentation to TSSA Toronto for registration of piping systems, 100% visual inspection of all pipe welds and weld and material mapping.
As the Quality Control Inspector at the various job sites I was responsible for coordinating all site inspection and test activities with the T.S.S.A. Authorized Inspector, and for obtaining his written acceptance on the inspection test plans pipe installation test data report.
Timothy J. Coles
Page 2
Comstock QC, QA #2 Blast Furnace - Dofasco - Hamilton; Ontario
June -July 2005
Duties include 100% visual inspection on all pipe and pipe supports welding, documentation for all T.S.S.X. Code required pressure tests, documentation and witnessing black light testing of pipe and all welded and screwed fittings for oxygen pipeline installed by Comstock, weld and material mapping, ensuring all Comstock welders have updated welding certificates, coordinating all Dofasco documents with I.N.E. QC, QX personnel, performing final walk down of piping systems and completing final Dofasco documentations.
Comstock QC, QA F-Dip Project - Dofasco - Hamilton, Ontario
June-July 2005
Duties included 100% visual inspection on all pipe and pipe supports and all bond strand bonding, weld and material mapping, coordinating with TSSA pressure testing and final walk down inspection of piping systems.
Comstock Canada QC,QA - Nanticoke, Ontario Unit#8 April-May 2005
Same as unit #7.
Comstock Canada QC, QA OPG. Nuclear Generating - Pickering Ontario
February - April 2005
QA, QC duties include visual inspection on fit-up, root pass for all welded pipe and fittings, material inspection and documentation, welding and material mapping, verifying bolt torquing on flanges and heat exchangers, documentations for all T.S.S.A. Code required pressure tests, following procedures for all inspection test plans (ITP's) and completing final walk down for ITP's. Completing NDE request forms for testing.
Coles Welding Inc. /Coles School of Welding, - Caledonia, Ontario
1996 - 2005
Owner/Instructor/Welder Fitter
Coles School of Welding was a Ministry of Training Approved Welding School directly responsible for the instruction and training of beginner to advanced welders. I trained welders to be able to pass all Canadian Welding Bureau tests and Technical Safety & Standard Acts tests including all position pipe tests. I have also taught blue print reading courses and oxy-acet burning and cutting.
Timothy J. Coles
Page 3
Stern Laboratories - Hamilton, Ontario 1993 - 1996
Construction Supervisor
Stern Laboratories is a nuclear fuel testing facility. I was directly responsible for design and construction of testing facilities for high pressure piping systems, develop and qualify welding procedures from carbon steel, stainless steel, aluminum and titanium. Arrange all non destructive testing of all welds. Responsible for ordering all materials (pipe, fittings, valves, flanges, etc.) for completing projects.
Coles Welding - Hagersville, Ontario 1984 - 1993
Welder/Fitter
Coles Welding was the welding contractor for Stern Laboratories
Fabricated testing facilities consisting of high pressure piping systems all welds were 1009/0
X-rayed. Held welding tickets in all positions 6G pipe for carbon & stainless steel. I &d repair work on super heated steam fossil boiler.
Dix Steel - Spokane Washington, USA 1980 - 1984
Welder/Fitter/Welding Inspector
Dix Steel was a heavy structural steel fabricator for buildings and bridges. Directly responsible for fitting and welding heavy structural columns, beams and heavy weldments for large buildings and bridge construction. Later became welding inspector, responsible for checking all fittups before welding and inspecting all welds to AWS code.
EDUCA TION
Mohawk College - Hamilton, Ontario
Applied Mechanics
Graduated 1976
Hill Park Secondary School - Hamilton, Ontario
Graduated 1975
UA67 MEMBER SINCE 2005
REFERENCES
Available upon request