MUKIL MURALIDHARAN

Email:acrw5s@r.postjobfree.com

Mob: +918*********

Experience Summary

Working as Offshore Measurement/Metering Engineer in Al-Basra oil Terminal with SGS Aberdeen.

** ***** **** ****rience in Fiscal Metering and Analyzers Maintenance (in India and Abroad).

Instrumentation projects & Maintenance Offshore, Oil & Gas Sector.

Expertise developed in the Offshore Projects

Excellent knowledge of HSE policies both onshore and offshore. Excellent knowledge of Oil & Gas Metering Principles, Instruments, Accuracy Verification and Calibration Techniques. Fault finding and trouble shooting skills.

Extensive experience in Engineering involving Construction, Commissioning, Hook-up, Planning and scheduling.

Co-ordination with Government officials, Clients, Consultants, Third Party Inspection Agencies and Manufacturers / Vendors. Preparation of Fiscal Metering audit documents.

Job positions History

Offshore Measurement/Metering Engineer in Al-Basra Oil Terminal with SGS Aberdeen.(Present)

Metering and Analyzer Supervisor in USAN FPSO with EXXON MOBIL Nigeria. (Jan-2013 to Dec-2014)

Metering Specialist in Qatar Gas Plant Ras Laffan Qatar. (June-2010 to Dec-2012)

Instrumentation Pre-Commissioning Engineer in Hyundai Heavy Industries

Nigeria.

Instrumentation Engineer in Maersk Oil Qatar Project L&T India.

Education

B.Tech Instrumentation and Control from SNMIMT College .

Diploma in INSTRUMENT TECHNOLOGY from GOVT. Polytechnic College Palakkad.

Technical Training

BOSIET: - OPITO Approved valid till 2017.

SAP: - Trained and hands on experience in TOTAL –UNISUP and EXXON MOBIL –IPES

Exxon Mobil Work management System

Alderley metering skid maintenance Training

Emerson Flow boss S600 Flow computer Maintenance Training.

OMNI flow computer maintenance training.

MECI Flow computer Maintenance Training

Instromet Flow computer maintenance Training

Instromet Ultrasonic Meter Training

Caldon Ultrasonic Meter Training

Endress+Hauser Coriolis Flow meter Training

Kelton Instrument Management System (KIMS) Training

SAAB Rosemount, ENRAF and Scientific Instruments LTD’s Level Transmitter training

Daniel & ABB Gas chromatograph Training.

Qatar Gas SAP Training.

On the job Training in Alderley metering Skid 6 Months

Qatar Gas Safety Training,

Offshore Safety and Survival Courses.

RESPONSIBILITY:-

Follow all the oil and gas safety procedure and keep good safety culture.

Co-ordinate with the Government officials, preparing all the documents for the auditing purpose. Follow all the national metering standards.

Availability and reliability of Oil & Gas Metering instruments, accuracy verification and calibration techniques. Fault finding and trouble shooting.

Maintain of the ODS metering system and sampling system.

Maintain of all flow meters, including turbine flow meters (Faure-Herman, Daniel), ultrasonic meters, Coriolis meters, differential-pressure transmitters and OMNI 6000 Flow computer.

Meter Proving (Inspection of the sphere and 4 ways valves, switch detectors), also assisting vendor for prover loop calibration and certification.

Preparing all metering documents like log books and Fiscal metering for Auditing.

Carrying regular preventive maintenance and corrective maintenance for the entire metering package.

Maintain all the custody transfer flow meters such as Flare Meters, Water injection meters and Gas lift and injection meters

Troubleshooting and calibration of all the Analyzers in FPSO like oxygen analyzer, BSW analyzer, Oil in water analyzers, HC analyzers and Gas Chromatographs.

Maintenance of auto sampling system (JISKOOT).

Maintenance of liquid and gas Densitometer (Solartron or Micromotion).

Good knowledge in SAP for the maintenance activities.

Coordination with the Nigerian Govt. Officials (Department of petroleum resources Nigeria) for fiscal metering compliant.

Application of HSE policies both onshore and offshore for all work performed.

Record keeping of all metering systems offshore and associated field and test equipment files & calibration records to provide an auditable trail to meet DPR requirements.

Calibration of flow measurement equipment in the correct manner and in accordance with Exxon procedures, utilizing various Company or client test equipment, and to advise immediately of the results and consequences in order to prevent or minimize miss-measurement occurrences.

Ensure that all related work is performed in line with company general specifications & procedures, and international codes & standards.

To complete all certificates, reports and expenses in a concise and timely manner to allow job completion and administration requirements to be undertaken within required company timescales.

Involved in Troubleshooting and maintenance of all type of liquid and gas fiscal metering system such as Daniel S600 flow computer.

Usage of Kelton Instrument Management System (KIMS) to keep a record of calibrations.

Involved in Troubleshooting and maintenance of all type of flow computer Daniel S600, MECI, INSTROMET.

Involve in Maintenance of Ultrasonic meters of Instromet and Caldon.

Calibration and maintenance of all types of analogue and digital liquid & gas fiscal metering systems. This included ultrasonic, high velocity multi-phase wet gas venturi meters, orifice, turbine, positive displacement and meter proving.

Ultrasonic meter Diagnostic health check, UM comparison check (Instromet) & Ultrasonic flow rate calculation.

In Daniel S600 Meter Pulse Integrity check ADC check, Frequency Input check, AGA8 Density Calculation, Calorific value calculation, Standard Density calculation, Flow rate calculation and Flow total calculation (LNG).

Orifice Plate Inspection.

Flow Rate calculation for coriolis meter & turbine meter, Flow totalizer check and zero meter check for coriolis meters.

Automatic Tank Gauge Verification check for Enraf (ATG 854) and Radar tank gauge (RTG 3960), Level gauge check.

Gas Density Transducer Vacuum Check and Liquid density Transducer Air check.

Proving and K-Factor calculation for Daniel S600 Prover computer.

Gas Chromatograph Checks.

Performing calibration on Daniel and ABB Gas chromatograph

Perform validation on all custody transfer Alderly metering systems which includes both liquid and gas systems.

Flow meter inspections and maintenance.

Performing meter proving and maintenance of Prover, both small volume Prover and ball Prover.

Performing scheduled preventive maintenance on level transmitters of Enraf and Saab Rosemount.

Maintaining logbooks for daily activities.

Good knowledge about International and National Standards – AGA, API, OIML, ISO etc. for oil and gas flow measurement

Pre-commissioning Engineer with Hyundai Heavy Industries Ltd. Nigeria

Project: Escravos Gas Plant Project -3

Role: Pre-commissioning Engineer

Client: Chevron Nigeria Ltd

Period October 2009 to May 2010

Responsibilities:

Loop checking of all field instruments connected in DCS (CENTUM 3000) from control room (HIS console). Working in troubleshooting of DCS & SIS panels.

Pre-checking of all field instruments, package skids & panels in field

Troubleshooting of DCS (CENTUM 3000) & SIS (PROSAFE) with YOKOGAVA vendor.

Preparing all as build Loop Drawings & Preparing of all check sheets for Pre-commissioning.

Loop checking of all Condition monitoring system (CMS) instruments such as Vibration sensors, Temperature sensors & keyphasors.

Handled all documentation for pre-commissioning as preparing of markup loop drawings,Termination drawing & P&ID’s

Done commissioning of vendor package skid with vendor (Air compressor package, MIMIC panel (Flare Logic) & Fuel Gas package.

Working in clearing of punch points of DCS & SIS panels & DCS Graphic.

Project Instrumentation Engineer with LARSEN & TOUBRO LIMITED India

Project: MAERSK OIL QATAR Project

Role: Instrumentation Engineer

Client: M/s MAERSK Oil Qatar.

Period April 2008 to September 2009

Responsibilities:

Quality control of installation, commissioning and maintenance of SCADA, F&G System, Paging System, communication Network and Field Instruments connected to various remote well platforms and Process platforms.

Apply IEC Standards & codes & Maersk International Standards.

Loop checking of various types of field instruments connected to SCADA, PLC & DCS systems. Installation and Calibration of Field instruments at remote well platforms and Process platform. Installation and maintenance of pneumatic shutdown panels at remote well platforms.

Calibration, Installation, Commissioning and Maintenance of all Field Instruments. (Smart, HART transmitter makes Honeywell, Rosemount, and Yokogawa).

Co-ordination with clients (M/s MOQ.), Inspection Authority of the Project (M/s BVIS and German Lloyds).

Preparation of Work Execution Procedure for Shutdown/Hookup/Testing and commissioning.

Handling Single Line drawings, Equipment lay out drawings, P&ID’s, Preparing testing reports, commissioning reports, Hook-up reports at ongoing Platform.

Also includes Tubing work for Instruments of all above Systems to Shut-down Panel for Signal, for Impulse & for Air Line.

Project Instrumentation Engineer with Aarkay Instruments Pvt. Ltd. India

Project : British GAS Platform

Role : Instrumentation Engineer

Client : British Gas

Period : July 2004 to March 2008

Responsibility:

Handling installation, loop checking, testing(Calibration & troubleshooting) of instruments like Pressure switches, Pressure Transmitters, Level transmitters, Level switches, Level gauges, Flow controller, Flow Transmitters, Temperature indicating controller, Pressure indicating controller, Pressure recorder, Pressure & Temperature gauges, control valves, shut down valves etc

Personal Profile

Name : Mukil MURALIDHARAN

Father’s Name : Muralidharan I A

Date of Birth : 29Yrs & 27-11-1985

Marital status : Single

Permanent Address: Ideampotta House

Ayalur (post) Nemmara

Palakkad Kerala.678 510

Res : +91-251-*******

Email:acrw5s@r.postjobfree.com

Languages Known : English, Hindi, Malayalam and Tamil.

Passport No : Z2803177

Date of issue : 05-04-2014

Date of expiry : 04-04-2024

Date:

Place: MUKIL M

Contact this candidate