Robert E. Russell Jr.

***** ****** ***** *****

HOCKLEY, TX 77447

H 936-***-****

OBJECTIVE

To obtain long term employment with a company that will allow me to bring an objective point of view and years of technical (hands on) experience to a professional team environment.

QUALIFICATIONS [Including but not limited to]:

*15+ years Industrial Maintenance / Millwright

Troubleshooting, Layout and Installation of Hydraulics,

Grease systems, Spray systems, Stainless tubing, Pipe fitting,

Crane repair, conveyors, pumps, gearboxes, forklift repair

Mechanical - Complete teardown, assembly and alignment

Working knowledge of tools-conventional, electric & pneumatic

*15+ years Industrial Electrician [Including but not limited to]:

Troubleshooting A/C & D/C Drives, Layout and Installation of

Conduit, Cable tray, J-boxes, Breaker panels, Transmitters

Explosion proof components, Cadmium Welding

Transformers, Switchgear, Control panels -Analog and PLC

Point to point, Terminations, Service loops, Outlets,

Industrial lighting systems

*15+ years Heavy Equipment Operator

Bobcats, Skytrack, Manlifts, Forklifts

Overhead cranes (Cab, Wireless Remote and Pendant)

Dock stocker, Reach truck, Platform lift, Swing reach

Industrial saws, Press brakes, Plate shear, Iron workers

*15+ years Fabrication

Design, layout, Extensive torch work, Welding (stick & mig)

*10 years Leadsman

5 years leadman @ Stewart & Stevenson (stall build & flowline)

*1 year Supervisor

Several years oilfield related assembly and repair

Shipping and receiving ….Warehouse and manufacturing experience

Heavy equipment certified since 1992 (lastest renewal 07/13)

Hydraulic Certified / Osha 8 hr / Hazwop / 1st Responder / 5 “S”

Robert E. Russell Jr. Work History

Level III Mechanic / Stewart and Stevenson 2005-Present

Complete mechanical, pneumatic and hydraulic assembly responsibilities of oilfield equipment. (Trailer, Skid and Truck Mounted Blenders, Fracs, C.A.S units, Hydration units) Also Rail King and IO

Reading and interpreting schematics, pre-assembly layout, buildup and installation of components: engines, transmissions, pumpdrives, pumps, motors, valves, hydraulics, wet kits, heater packages. Startups and commissioning of units.(setting pressures and speeds troubleshooting as necessary). Working closely with testline personnel and engineers for constant quality improvements. Extensive training of new personnel with regard to component identification, assembly and work ethics. Organizing an assembly sequence for greater time and cost efficiency. Motivating and working closely with team members to create a strong sense of team, a safer work environment, greater productivity and pride in our accomplishments. (Leadman in Stall build and Flowline Assembly)

Mechanic/Electrician / Eurecat / (Alliance Temps) 2002-2005

Initially contracted to wire and install a plc panel for an H2S plant expansion at a Catalyst regeneration plant. Upon completion of the installation, mounted transmitters, ran cpvc, pulled wires and terminated. Extensive fabrication, pipe fitting and stainless tubing. Electrical layout and installation of indoor/outdoor lighting systems (277VAC). Upon rollover into the company continued as primary electrician/welder as well as taking on plant mechanical duties. Rebuilding process pumps, conducting ph testing and calibrations, daily and monthly lube duties. Complete teardown and rebuild of production equipment as needed. Changed seals, 3phase motors, belts, conveyors, maintained electric and propane forklifts. Troubleshooting and repair of all systems electric, mechanical and pneumatic…Diagnosed, ordered parts and installed. Worked closely with production personnel and engineers for constant process improvements. Maintained accurate maintenance records.

Maintenance/Electrical / Tex-o-lon (Express)

Contracted to layout and install lighting system for a machine shop.

Electrical design and layout ordered necessary materials and installed. Installed transformer, installed 220/110 VAC breaker panel. Installed unistrut, conduit, fluorescent lighting, electrical switches and drops.

Rebuilt hydraulic cylinders, Repaired A/C units, rewired existing equipment to make more efficient and assisted manufacturing as needed.

Maintenance Mechanic/Electrical / Sysco Food Distribution Services

Complete maintenance on all motorized equipment. Electric pallet jacks, forklifts, reach trucks, tuggers and manlifts (Barrett,Crown,Raymond)

Facility maintenance: A/C units, overhead doors, dock and warehouse lighting. Assisted on the dock as needed loading and unloading trailers.

Electrical/Tubing and Instr / Universal Compression (MS) 08/01-08/02

Complete electrical for oilfield engine and compressor skid units. Unit layout, installation of conduit, cable tray, stainless tubing, explosion proof components, wiring control panels, testing and trouble shooting. Also screw pipe fitting and fabrication as needed.

Maintenance/Electrical / General Plastics & Rubber 01/01-08/01

Complete maintenance of all facilities including three machine shops, a fiberglass composite shop and a rubber extrusion facility. (separate locations) Installing new circuits: 3 phase 480VAC, single phase 230VAC,and 110VAC. Electrical conversions from A/C to D/C drives. Complete rewiring of existing machinery, installation of pneumatic system, vacuum systems, jib cranes and new machinery. Troubleshooting as needed, diagnose, ordered parts and repair. Worked closely with engineers and manufacturing for greater productivity & significant decrease in downtime.

Maintenance Mechanic / Tex-Tube / (Resource Mfg) 08/99-03/01

Complete maintenance responsibilities for production equipment in a pipe manufacturing plant. Troubleshooting as needed… rebuilding, cylinders, gearboxes, valves, conveyors and pumps. Pipe fitting, welding, minor electrical, overhead crane repair and heavy equipment operator.

Maintenance/Electrical / (Magnum Staffing) 06/98-08/99

Mustang-Electrical and pipefitting responsibilities for offshore skids

Hanover-Electrical/Mechanical maintenance of skid mounted oilfield equipment in a rebuild shop. Complete teardown/rebuild, replaced parts as needed. Set tolerances to restore used equipment to factory specifications.

ITC-Complete maintenance responsibilities and upkeep of production equipment in a meat packing facility. Electrical and mechanical troubleshooting of plc’s, motors, compressors, vacuum systems, boiler, air conditioning units, smokehouse units and freezers.

Material Handler / CTI / (Certified Temps) –Ship/Rec 02/98-06/98

Material Handler / Compaq / (Express Temps) –Ship/Rec 02/98-06/98

Maintenance/Production Supervisor/Flintlock (Dan Temps) 06/97-12/97

Set-up and maintained production equipment for the least amount of downtime in a candle manufacturing facility. One month as a maintenance tech (6/97)…then presented with a second shift production supervisor position. (Over 54 people)(7/97). Set records for the highest quality production at the best cost efficiency. Maintained a safe motivated work environment, maintained accurate records of performance and attendance.

Conducted reviews, corrective actions, scheduled vacations and completed “total time” for payroll.

Industrial Maintenance Leadman / Nucor Steel 1992-96

Complete maintenance responsibilities for production casting equipment in a steel mill. Teardown, assembly, stainless tubing bending, troubleshooting and repair problems with grease systems, hydraulics, spray systems, bearings and gearboxes. Performed production critical alignment (50 rolls, 20ft run, 200 alignment points, Tolerances held at +0 /- .15mm)

A Note From the Applicant

First of all, “Thank-You” for reviewing this resume for employment. Through the years it has always been my intent to build a broad base of experience and useful skill sets. To be a part of and help create a working culture that is safe, highly productive, cost and time efficient by improving the “repeatable process”. If my qualifications fall short of what you seek,…I challenge you to take a chance on me. In return for the knowledge that you possess that I seek, I offer these qualities in addition to those previously stated:

Dedication, honesty, dependability, hard-working and professionalism.

Strong communication skills, verbal and written.

Able to multitask, motivate and coordinate large groups of people of varying skill set in less than idea situations.

Willing to learn from those able to teach and able to teach those willing to learn…Not afraid of height or depth,… extreme heat or cold…

Have Tools Will Travel.

Robert

References Available Upon Request

Contact this candidate