Alvin Bradley Farrell (Brad)

*** ***** **** ****.

Norman, Okla. 73071

405-***-****

Summary

Since college graduation, I have been involved in the drilling fluids industry approximately 39 years. I completed the IMCO Services Drilling Fluids Technology School in August 1974 and worked 1 year engineering jobs in Wyoming, Utah, North Dakota, South Dakota and Montana. I relocated to Oklahoma working in Western Oklahoma, and the Texas panhandle taking care of 20,000+- ft. jobs near Wheeler and Kelton, and Canadian, Texas, along with some jobs in the Clinton, Okla. area.

I then relocated to Ardmore, Oklahoma with Milchem, Inc. and worked the Southern Oklahoma area for various companies for 18 years. Then for the next 10 years worked as a consultant offshore in the Gulf of Mexico, (various oil companies as consultant) South Texas,(Exxon Mobile) North Slope, Alaska,(BP, ConocoPhillips) Rifle, Colorado,(Exxon Mobile) Big Piney, Baroil, Hiawatha, Wamsutter, Wy.,(Devon, Encana, Merit Energy, Cabot Oil & Gas, Ultra) and Hilo, Hawaii (Puna Geothermal). I worked with MI-SWACO two years as a Senior Drilling Fluids Specialist primarily in the Oklahoma, Arkansas, and Kansas areas. Drilling fluids consultant to bp America in the Wamsutter, Wyoming area 4 years. Drilling fluids consultant to MISWACO for Anadarko in Colorado 1 year. Currently working as a drilling fluid consultant to NAFTA MUD INC. for RKI in Wyoming area.

Work History

The work offshore primarily involved the drilling of major directional holes, with angles in excess of 65 degrees to near horizontal. For two years I worked exclusively for Mud Check, Inc., Houston, Texas Consulting Firm, running predominantly oil- based drilling fluids, sythetic oil based drilling fluids,(proficent with ESCAID 110 & PETROFREE SF systems. and occasional

waterbase systems for Exxon Mobil Development Company. Exxon Mobil utilized the latest Schlumberger Extended Reach Tools, which are similar to Baker Hughes Auto-Trac Systems. I have engineered fluid systems during the utilization of both service company's extended reach directional systems. While in the Gulf of Mexico, I worked on floaters, jack-ups, inland barges. Also, I have been involved with and have extensive experience in directional holes in Southern and Eastern parts of Oklahoma and Arkansas. Note: I have experience with the MISWACO, BAROID, BAKERHUGHES INTEQ, and FLUIDS MANAGEMENT oilbase / waterbase / and completion fluids systems.

FLOATER EXPERIENCE. I have worked on various floaters in the GOM. Primarily for Walter Oil & Gas Inc. Houston, Texas. The floaters were all of the DIAMOND OFFSHORE DRILLING CO. Drilling operations took place in the following areas and blocks. EAST BREAKS 168, 104, GARDEN BANKS 108, 104, 179, 152, EWING BANKS 1006, HIGH ISLAND SOUTH ADDITION BLK

169 (just off shelf) MISSISSIPPI CANYON 443, 192.

FLOATER WATER DEPTH RANGE 1700'-2000'+

TYPE MUD SYSTEMS UTILIZED ON FLOATERS

1. lignosulfonate mineral oil dispersed systems WBM 2. lignosulfonate mineral oil dispersed with 2-3% glycol 3. non-dispersed low solids PHPA systems with 1.75-3 lb.per bbl. active polymer PHPA (EZMUD DP & LIQUID EZMUD.) Achieved gauge hole with these systems. Used some glycol for additional gumbo stabilization requiring some rheology control with small additions of thinners. The high concentration of PHPA systems were achieved through presoluabilized, ph reduced, lignite base for PHPA polymer, which was then added slowly into drilling fluid system.

The last four years I have monitored mud systems predominantly on horizontal drilling projects utilizing waterbase and oil base fluid systems including sodium silicate waterbase muds and oil base muds in Arkansas to depths of 6000 ft. to 8,000 ft. with kick off points at 3,000 ft. to 4,000 ft.The horizontal jobs using both waterbase and diesel oil base systems in Oklahoma were to depths of 14,000 ft. to 18,000 ft. with kick off points originating from 10,000 to 12,000 ft. where the drilling of the curves started, progressing through the 4,000 ft. to 6,000 ft. horizontal sections drilled.

I provided drilling fluids consultant fluids engineering service for 3 years to bp America Wamsutter, Wyoming.

I am presently consulting for MISWACO on the north slope in Alaska.

I have my own computer, and am able to generate the mud reports from various computer programs appropriate for particular operations, dependent upon what data is required by the operator. I also have my own mud testing laboratory / equipment,etc.

APPROXIMATE WORK PROGRESSION

2015-Present Drilling fluids consultant north slope Alaska since January 1, 2015.

2014- Drilling fluids consultant with NAFTA MUD, INC. I am presently working as a consultant to Nafta Mud, Inc. for RKI Exploration in the Casper, Bill and Douglas, Wyoming areas. All of the projects have been horizontally drilled holes. 2014- Since the first of the year in January, I was a consultant to MISWACO for Anadarko Petroleum Corporation north of Denver, Colorado.

2011- 2014 Drilling fluids consultant to bp America Wamsutter, Wyoming

2008-2010 Senior Drilling Fluids Specialist for MI-SWACO central United States working in Oklahoma and Arkansas. 2004-2007 Drilling Fluids Engineer consultant for MI-SWACO rocky mountains Denver, Colo. District

1999-2004 Drilling Fluids Engineer consultant for MUDCHECK, INC. Houston, Texas

1994-1999 Drilling Fluids Engineer consultant for Gordon Reed & Associates

1982-1994 Drilling Fluids Engineer & Drilling consultant for Keith F. Walker Oil & Gas Co. LLC.

1974-1982 Drilling Fluids Engineer for various mud companies, IMCO SERVICES-1 year, Milchem, Inc.-5 years, Drilling Mud, Inc.-2 years, Southwestern Drilling Fluids Servicess, Inc. 1 year. EDUCATION

High school graduate Grove, Oklahoma - 1969

Attended University of Arkansas-1969 - 1970

College graduate East Central State University 1970-1974 IMCO Services Drilling Fluids Technology School - 1974 Milchem, Inc. Borehole Stability School - 1978

Hughes Bit School - 1993

University of Oklahoma Well Control and H2S Awareness School

- 1994

Exxon Mobil Non Aqueous Fluids (NAF) School - 2000

(classroom and laboratory instruction for the preparation and maintenance of oilbase drilling fluids & synthetic base fluids.) References

MISWACO / Michael Francis / Jeremy Chadwell 907-***-**** MISWACO / Stan Jepson / Brady Allen / Ron Uecker /- Denver, Colo. 888-***-****

Mud Check, Inc. / Bill Cleverdon - 281-***-****

Gordon Reed & Associates / Gordon Reed 337-***-**** Fluids Management, Inc., / Jim Sherman 281-***-**** Petroleum Engineers Incorporated / Brad Pitts 405-***-**** Energy Fluids Inc., / Mike Shadid 405-***-****

MISWACO / Donnie Vanvranken 405-***-**** Okla. City, OK MISWACO / Ron Clifton 405-***-**** Okla. City, OK