Summary

More than ** years of experience including 20 years as Sr. Technical Advisor, Group Head, and Lead Engineer position. Performed electrical engineering & design works for large plants, offshore drilling and production facilities, power generating plants, development of oil field facilities, petrochemical plants, refineries, fertilizer plants, power generation & transmission lines for major oil company clients including Saudi Aramco, Qatar Petroleum, Exxon Neftgas Ltd., ExxonMobil, Petrobras, Rio De Janeiro Petrochemical Complex, Chevron USA, BP Alaska,, Kuwait Oil Company, Nigerian Oil Company, Tengizchevroil, Maersk Oil Qatar, British Gas in Trinidad, & Commonwealth Edison company Chicago. Responsible for relay protection setting & coordination studies, power system studies (load flow, short circuit, Arc Flash, relay settings,& harmonic studies etc.), overall power distribution design, select equipment ratings, preparing project design documents, proposals, protection relay schemes, design calculations, equipment sizing, ratings, data sheets, specifications, purchase requisitions, protection relay co-ordination settings, detail design drawings, material take off and scope of work documents.

Experience

Kellogg Brown & Root, Inc. 601 Jefferson Street Houston, TX 77002 USA

15-May 2015 –

31-Jul 2015

Sr. Technical Advisor - Electrical Koch Nitrogen Enid, Oklahoma Ammonia Project.

Houston Texas.

Performed Protection Relays settings for Multilin B90 Bus Differential Relays, and Simocode Siemens Low Voltage smart Overload relays configuration.

Sr. Technical Advisor - Electrical Midwest Fertilizer Company LLC Project

Houston Texas

Responsible for the electrical engineering discipline support on the Midwest Fertilizer Company LLC project. Performed Load Flow and Short Circuit calculations, Prepared Substation equipment Layouts and electrical loads list.

WorleyParsons

Sep 2014 – May 2105

6330 West Loop S Bellaire, TX 77401

Snr. Supervising Electrical Engineer Lake Charles Chemicals Project

Houston Texas

• Responsible for the electrical engineering discipline support on the LCCP project. Review and approve design submittals from contractors and vendors. Support the incorporation of technically feasible, latest technology based design, safe, environmentally sound, and cost-effective electrical design best practices into the project. Identify risks to the project and provide technical solutions. Review the design and identify cost-saving opportunities to reduce the project total cost of ownership. Provide Expert reviews on power systems studies, and proper selections of ratings for electrical equipment for the project

May 2009 –

Aug-2014

Electrical Group Head – WorleyParsons, Doha, Qatar

Responsible for supervising electrical group on several projects.

Prepare project execution plans and schedules. Assign work to personals, man loading and scheduling of the projects. Review and approve project design documents & project deliverables. Provided planning for schedule development, for work in progress, reporting progress, and updating plans. Prepared implemented check sheets in accordance with WorleyParsons document checking procedures and checked documents to ensure that they met all WorleyParsons project quality requirements.

Responsible for Power systems studies for several projects.

Perform Power systems studies for large facilities including New Doha International Airport, NGL complex, ORYX GTL plant, Halul island, NFA offshore platform Subsea Cable power delivery, New Doha Port Project, and Ivanhoe Mines Mongolia Inc. Responsible for overall power distribution system design, selection of major equipment ratings and feasibility of supply power to the facilities.

BRIC Project - Maersk Oil Qatar

Performed detail design review for the Electrical scope of the entire BRIC project. Performed Power System Study, including Load Flow, Short Circuit and Motor Starting. Reviewed equipment ratings and results were found to be within the acceptable limits. Performed HV Cable Sizing Calculations & Relay Protection Setting and Coordination Study to verify equipment design & protection settings.

IVANHOE MINES MONGOLIA INC., MINING FACILITY RELAY PROTECTION COORDINATION STUDY.

Provided detail design & Relay protection and settings for 220 kV, 35 kV, 10.5 kV, 6.3 kV and .415 switchgear and motor control centre. The switchgear protection relays consist of ABB REF-543; RET 541,RET 670 & RED 670 RELAYS. Used ETAP software to generate relay settings and co-ordination curves.

CONDUCTED SAFETY & OPERABILITY STUDY (SAFOP) STUDIES AS CHAIRPERSON FOR VARIOUS QP PROJECTS

(Oil and Gas- Qatar Petroleum)

oFeed For Port And Berth Infrastructure Phase 2 For Ras Laffan Port Exp

oFEED for Ras Laffan common cooling sea water project Phase III

oEngineering Consultancy Services for Study of 33Kv Electrical Network in the Dukhan Fields

CONSOLIDATED ELECTRICAL POWER SYSTEM STUDIES FOR QP MESAIEED OPERATION.

Working as Team Leader, scope included detail design & updating the existing Power Distribution System model for the overall network. Determine maximum demand loads on transformers, switchboards etc. and estimate spare capacity. Performed Power system study and prepared reports including Load flow analysis and load forecasting, short circuit analysis, motor start-up analysis, power factor improvement. Performed Arc flash hazard analysis.

CENTRAL UTILITY PLANT 2, 3 & 4 (CP 60) - NEW DOHA INTERNATIONAL AIRPORT, DOHA, QATAR

Worked as a Team Leader for detail design of utility plants for NDIA project. Work includes protection settings, perform power system studies, earthing & lightning protection. Coordinated with other disciplines, vendors, subcontractors, and construction contractor.

Preparation of 11kV, 6.6kV & 415V Protective Devices & Relay Setting Calculation for transformer, Generator, Motor and Power Feeder.

System Study Report (Load Flow, Short Circuit, Motor Starting Study) using ETAP software.

Preparation of SLD for 11kV & 6.6kV Generator Paralleling Switchgear.

Preparation of SLD for 11kV, 6.6kV Chiller Switchgear.

Preparation of SLD for 415V LV Switchgear/MCC, AC/DC UPS System.

Preparation of Specification: MV/LV Switchgear, MV/LV Cable, etc.

HALUL ISLAND FEED FOR POWER SUPPLY PROJECTS TO HALUL & NFA PLATFORM (Oil and Gas- Qatar Petroleum)

Subsea Power cable to Halul

Project included detail design of supplying electric power to Halul Island from KAHRAMAA grid in Ras Laffan via 2x100 MW 132kV 96 kms sub sea cables. The Project includes substation at Halul and modification of existing power management system.

Worked as Team Leader to supervise project deliverables including Power Systems Analysis, Substation Layouts, and Protection & metering single line diagrams. Coordinated with other disciplines, vendors, subcontractors, and construction contractor.

Subsea Power cable to NFA

Project included supplying electric power to NFA from KAHRAMAA grid in Ras Laffan via 1 no. 25 MW 66 kV 80 kms HVAC sub sea cable. Substation at Ras Laffan included Converter substation for frequency conversion from 50 Hz to 60 Hz to suit NFA and modification at NFA to receive power.

As a Team Leader, responsible for review / detailed engineering of all Electrical design drawings / documents pertaining to substation equipments like 132 kV, 66kV GIS, CT / VT calculations, Earthing calculations, DC system calculations, Fault level calculations, Cable sizing calculations, Equipment Layouts, Single Line Diagrams (Main and Protection & Metering), Cable Routing Layouts, Cable Supporting and Tray Arrangements, Earthing & Lightning Protection drawings, Cable Schedules, Interconnection Schedules, Protection Setting Calculations, equipment vendor drawings like generator, transformer, switchgear etc.

NEW DOHA PORT PROJECT

New Doha Port Project –Develop detail design of power distribution system in accordance with KAHRAMAA and International Standards for 400 MW loads at various port terminals and facilities. Provide systems studies and ratings for 220 kV, 66 kV & 22 kV GIS substations, 220 kV, 66 kV & 22 kV XLPE cables, & 60/80/100 MVA power transformers. Coordinated with other disciplines, vendors, subcontractors, and construction contractor.

The port includes following facilities.

Container Terminal 1

Container Terminal 2

Container Terminal 3

General Cargo Terminal

Multi User Terminal

Livestock Support Areas

Vehicle Support Area

Hassad Foods Support Area

Offshore Supply Terminal

Qatar Coastguard and Emiri Yachts Facility ***

Cruise Ship Terminal

Port Marine Services Unit

Port Admin Area (General Port Facilities)

Port Employees Facility

Future Allowances for Development within Logistics Zone

2001 – April 2009

Supervising Electrical Engineer– WorleyParsons, Houston, TX

Projects include:

Exxon Neftegas Limited Sakhalin-1 / Arkutun-Dagi offshore platform

The project consists of detail design for drilling rig and production facility to produce 90 kbd of oil, and 130 Mscfd of gas.

Responsible for detail design based on IEC rated equipment selection, power distribution system design consisting of 4 each 15 mw / 10 kV Solar Titan-130 Gas-Turbine Generators, 10 kV switchgear lineup to feed 5 mw 10 kV Motors, and step down transformers to feed 6 kV and 380 Volt loads. Performed short circuit calculations, load flow calculations, and motor starting studies for selecting and specifying switchgear, transformer, and feeder breaker ratings. Prepared protection and metering one line diagrams, substation design, equipment arrangements and layouts.

Petrobras Comperj Rio De Janeiro Petrochemical Complex.

Project consists of multiple chemical processing facilities with 500 MW power demand. Responsible for performing system design studies to select 345 kV GIS bus and breaker ratings and arrangement, 230 kV GIS bus and breaker ratings and arrangement. 500 MVA power transformers, 345 kV & 230 kV XLPE cable sizes. Prepared protection philosophy for 345 KV, 230 KV 34.5 kV, 13.8 kV, 4.16 kV and 480 Volt equipment.

Sinclair Heavy Crude Expansion Project at Tulsa Refinery to process heavier and sour crude and expand the capacity of the refinery.

The project included detail design of following units:

Crude Unit #2

Hydro cracker

Delayed Coke

SRU (Sulphur Plant, Amine Regenerators, Sour Water Strippers and Tail Gas Treating Units)

OSBL

Responsible for detail design of overall power distribution system to supply power to the above units, totaling loads up to 60 MW. The power distribution consists of utility source rated at 138 KV to main outdoor substation with SF6 breakers, and to main plant area substations with 24/ 32/40 MVA transformers and 13.8 kV / 4.16 kV / 480 volt switchgears. Performed ETAP studies including short circuit calculations, load flow calculations, and motor starting studies scenarios for selecting and specifying switchgear, transformers, and feeder ratings. Prepare protection and metering one line diagrams, select transformer sizes, switchgear equipment ratings, substation design, equipment arrangements and layouts.

Saudi International Petrochemical Company - Juabil Sipchem Olefins Complex - Sipchem olefins complex project for Saudi International Petrochemical Company. Responsible for detail design of overall power distribution system of more than 22 plants, totaling loads up to 220 MW. The power distribution consists of utility source rated at 230 KV to main GIS substation, and to main plant area substations with 50/ 63/86 MVA transformers and 13.8 kV / 4.16 kV / 480 volt switchgears. Performed ETAP studies including short circuit calculations, load flow calculations, and motor starting studies scenarios for selecting and specifying switchgear, transformers, and feeder ratings. The facility consists of large induction motors, variable speed extruder drives and SCR controlled heater loads. Develop specification and data sheets for high voltage equipment. Prepare protection and metering one line diagrams, select transformer sizes, switchgear equipment ratings, substation design, equipment arrangements and layouts.

Marathon Oil Company - West Africa Gas Capture and EG LNG 2 –

Responsible for short circuit, load flow, motor starting and protection relay selection studies using GE Multiline 750, 469, and 489 relays. The facility consists of two GE Frame 5- 22.5 MW gas turbine generators and 13.8 KV, 4.16 KV and 480 volt power distribution substations with large 4000 hp induction motors. Prepared protection and metering one line diagrams, select transformer sizes and select switchgear equipment ratings.

Unocal Bangladesh - detail design for Bibyana Gas Development Project –

Responsible for short circuit, load flow, motor starting studies and protection relay settings. The facility consists of three 1 mw on site gas turbine and diesel generators and 480 volt power distribution substations. Prepared protection settings and testing data sheets for Siemens WL breakers with ETU 748 solid state tripping modules.

WorleyParsons Iraqi Joint Venture, Kirkuk Iraq –

Worked on detail design of WorleyParsons Iraqi Joint Venture project in Kirkuk Office. Coordinated with other disciplines, vendors, subcontractors, and construction contractor. This project consisted of design, specifications, & installations of 33KV, 11KV, & 415 Volt equipment, in accordance with IEC standards. The electrical equipment was supplied by Siemens High Voltage and Low voltage manufacturing plants in Turkey. All power and control cables including terminations were specified in accordance with IEC standards and were supplied by Nexans manufacturing plants in Turkey. Responsible for writing electrical equipment specifications, data sheets, and scope of work documents. Performed ETAP studies for short circuit, & load flow analysis for switchgear equipment ratings. Developed relay co-ordination and protection settings for 33KV, 11KV breakers, using Multilin 750 relays. Prepare One Line diagrams, prefabricated switchgear building specifications & layouts. Prepared cable schedules and issued bulk cable purchase requisitions. Performed 23 MW Generator grounding studies to size and add generator neutral grounding system.

Obajana Cement Power Plant, Nigeria –

Project consisted of detail design of 3-GE-LM-6000 (45 MW/11.5kV) dual fired gas turbine generators provided by GE Aero to be installed for Obajana Cement plant in Nigeria. Prepared metering and protection 1-Line diagrams, grounding grid system design and layout, switchgear building equipment layouts, plant area and control room lighting design, installation details, cable schedules, cable tray sizing routing, and take offs. Issued purchase requisition for bulk electrical materials, cables and accessories.

Saudi Chevron Petrochemical Company Jubail –

Responsible for detail design of 115 KV Gas Insulated Substation extension work. Prepared 115 KV breaker protection systems including 115 kV bus differentials, over current and directional relay selection and protection settings. Prepared 115 KV solid dielectric cable specification and data sheets. Performed ETAP short circuit and Load flow analysis for 115 kV and 13.8 KV, switchgear ratings. Prepared load list and power cable duct bank routing. Prepared hazardous area classification.

Olokola Gas Supply (OKGS) offshore facility

The Olokola Gas Supply (OKGS) offshore facility consists of offshore operating platform, flare head and a future compression platform currently designed as “LP”, and connected with bridge to living quarter platform.

The scope included system studies including load flow study and motor starting study for the Funiwa Platform and associated installation.

1.1 MAJOR ELECTRICAL EQUIPMENT

The major equipment as shown on the overall one line diagram includes:

- 3 -EACH, TAURUS 70 Gas turbine generators

- 1 -EACH, Essential Diesel Generator

- 1 -EACH, 4.16 kV medium voltage metal clad switchgear and 4 -EACH, 480 V low voltage switchgear (1 -EACH, for Future Installation i.e. LP Platform)

- 15 -EACH, 480 V Motor Control Centers

- 4 -EACH, MEDIUM VOLTAGE pump motors connected directly to the medium voltage switchgear.

- 4 NOS, 2000 KVA Transformers, 2 NOS 1500 KVA Transformers and 2NOS, 1000KVA Transformers.

- 2 -EACH 200A, 10 SEC ZIG-ZAG Transformers to provide low resistance grounding for medium voltage switchgear in line with client requirements

Escravos Gas Project Phase 3, Chevron Nigeria Limited –

Project consisted of onshore gas processing facility as part of on overall NNPC-CNL Western Delta gas development program. Responsible for Electrical Front End Engineering Design (FEED) including designing new prefabricated substations with on site power generating facility using Solar Gas Turbine Generators. Prepared load list, generator sizing calculations, power transformers, 13.8 kV, 4.16 kV and 480 volt substations. Prepared specification for 13.8 kv, 4.16kv switchgear, and 480 volt switchgear and MCCs. Prepared metering and protection 1-Line diagrams, switchgear building equipment layouts, installation details, cable schedules, cable tray sizing, routing, and take offs. Issued purchase requisition for budgetary estimates for substations, and generators. Provided budgetary cost estimates for bulk electrical materials, cables and accessories.

Wolf Hollow Combined Cycle Power Plant –

Worked on detail design of Wolf Hollow combined cycle power plant for Enron consisting of 2 combustion gas turbine generators each rated at 271 MVA and heat recovery steam turbine generator rated at 334 MVA, located at Granbury, TX. Responsible for review and approvals of Mitsubishi M501 gas turbine generator and auxiliary equipment vendor DWGs. Prepared three line diagrams / one line diagrams and phasor diagrams. Prepared area classification, and equipment location at the power plant facility. Provided protective relay settings, configured user map address for modbus communications with DCS, and prepared set point files for GE power management 750, 745, 469, and PQM relays. Prepared requisitions and reviewed vendor DWGs for power distribution center prefabricated buildings consisting of 7.2 Kv & 480 V switchgear/MCCs, UPS, RTU, and substation protection relay panels.

2000 - 2001

Supervising Electrical Engineer– NANA/COLT ENGINEERING LLC,

Anchorage AK.

Prepared cost estimate and feasibility study for Borealis development to extend 69 kV circuits to six miles, with solid dielectric power cable including overhead lines consisting of tangent/ terminal poles, with Hawk/ acsr cable. Prepared 69 kV preliminary switchyard design with SF6 breakers, 13.8 kV preliminary substation / switchgear design, and 4000-hp variable speed motors power supply system at Prudhoe Bay.

Provided detail design with material take offs for power supply to drill site facilities, and water injection facilities at Prudhoe Bay. Coordinated with other disciplines, vendors, subcontractors, and construction contractor.

Prepared design for Power supply to, compressor facilities, and deep well 750-hp variable speed drive motors. Prepared design proposals, including load flow, short circuit and voltage drop analysis with ETAP Calculations.

1999 - 2001

Lead Design Electrical Engineer – VECO ENGINEERING Co, Anchorage AK.

Wrote specifications for generator installations, 115 kV switchyard design, grounding grid design, Voltage drop, cable selection, short circuit and load flow study using ETAP programs, and facility design.

1998 – 1999

Project Manager - MEB Engineering Houston Texas

Managed METRO Houston and Port of Houston projects. Added Blower motors, / Motor control centers at Port of Grain Elevator facility and dockside cranes at Sealand Container Terminal facility. Work involved preparing technical submittals for the equipment and materials to client. Prepared purchase requisitions for the equipment, coordinated job site delivery schedules, conducted progress meetings and supervised construction activities.

1994 - 1998

Lead Design Engineer Electrical - R.M. Parsons Co. - Kuwait

Texaco/Kuwait Oil Co., Joint Operations, Wafra, Oil Fields, Kuwait Performed short circuit, and load flow calculations, provided protection relay settings of Westinghouse digitrip relays, GE MDP overcurrent relays, Basler generator protection relays etc. Selected ratings of electrical equipment for Power plant, and pumping stations with 13.8 kV motors up to 5000 hp. Prepared feasibility studies for 34.5 kV & 115 kV transmission lines. Prepared specifications, scope of work, data sheets and one line diagrams, for Power Control Rooms consisting of 13.8 kV, 4.16 kV, .480 v switchgear, with Multilin protection relays. Wrote scope of work documents, issued bid packages, and completed projects for plant distribution, modification and control works. Designed power distribution & control system for shipping pump motors, desalters, and oil gathering centers. Wrote purchase requisitions for 4.16 kV MCCs, 480 v MCCs, and major long lead electrical construction materials including power and control cables, conduit fittings, and cable terminations.

Kuwait Oil Company - Ahmadi, Kuwait - Prepared preliminary design with detailed estimate for power supply to a large crude oil export facility consisting of 17 mw Gas turbine shipping pumps, and associated auxiliaries. The design, specifications, and installations of all electrical system including 33KV, 11KV, & 415 Volt equipment were in accordance with IEC standards. All power and control cables including terminations were specified in accordance with IEC standards. Performed calculations to size plant electrical equipment. Prepared specifications, data sheets, and scope of work documents for LSTK bid packages for gas injection facilities, water injection plants with motors up to 4000 kW, and crude oil gathering centers. Prepared purchase requisitions for 11kv 3.3kv, and 440v switchgear and MCC equipment. Prepared single line diagrams, layouts and interconnection drawings.

1987 - 1994

Supervisor Electrical Dept., Zamel & Turbag Eng. - Alkhobar, Saudi Arabia

Provided electrical system design calculations, short circuit study, voltage drop and equipment sizing calculations. Prepared equipment specs, data sheets, purchase requisitions, detail construction DWGs, relay settings, material take off and scope of work documents for following major projects.

Saudi Aramco Projects

Khursaniyah Pump Station - The project consisted of designing new 115 kV Substation and large pump station consisting of motors up to 13750 hp. The detail design work involved new 115 kV transmission line, dead end A-frame structures, 121 kV SF6 breakers, disconnect switches, 115 KV-13.8 kV 50/67 Mva power transformers, 13.8 kV bus duct, 13.8 kV vacuum breaker line up, Inverter and dc battery system. Coordinated with other disciplines, vendors, subcontractors, and construction contractor.

Uthmaniyah Gosp-6 Gas Gathering Centre - The project consisted of installing gas gathering facility with 7000-hp gas compressor and air-cooled heat exchanger. The electrical work included detail design of 115 kV transmission line, 115 kV SF6 circuit switcher, 25 Mva power transformer, 13.8 kV feeder circuit breaker, and associated protection relay control panel.

Design of overhead distribution lines - Designed more than 500 km of 13.8 kV and 4.16 kV distribution lines to more than 300 cathodic protection rectifiers for well casings and flow lines. The design work included design of tap of poles, dead end poles, and riser poles with complete hardware and fittings, and provided sag and tension calculations.

Abu Safah Offshore platform - The project consisted of installing gas turbine drive for 3500 hp shipper pump. Responsible for the design and procurement of 480 V starters for auxiliary motors prepare detailed design of power, lighting and grounding of offshore platform modifications.

Jubail Industrial Area Projects:

Saudi Petrochemical Company (SADAF) Jubail Saudi Arabia - The projects consisted of emergency intervention valves, warehouse modifications, and ethyl benzene tanks. Electrical work consisted of designing power lighting and grounding layout of tank farms. MOV fire protection, conduit and cable routing, duct banks, cable trays and preparing material take off, and scope of work documents.

Saudi Consolidated Electric Co. (SCECO) - Numerous assignments in the region for Saudi Consolidated Electric Co. (SCECO), Shedgum Faris and Berri Power Plants, Saudi Iron and Steel Company, and Al Jubail Petrochemical Company (Kemya).

1985 – 1987

Construction Electrical Engineer., Fru-Con Construction Corp. USA

Proctor and Gamble Camey soap Mfg. – Chicago, IL

Anheuser Busch Plant – Visalia, CA

Sewage Treatment Plant - San Antonio, TX

Diamond Shamrock Co-Gen. Project – Pasadena, TX

Construction and start up of 25 MW Co-Gen. plant, Low-pressure boilers, step up transformers, switchgear and MCCs.

1983 - 1985

Lead Electrical Engineer Zamel Turbag Brown & Root (Saudi Arabia)

Saudi Arabia - Design of power distribution for pump motors, MOVs, and Scraper Trap facilities for 1.85 MMbpd Cross Country Crude pipeline, 700-MM cf. /day flare gas system, and metering skids.

1981 – 1983

Construction Electrical Engineer, Brown and Root Inc., - Houston TX

Chevron Refinery - Pascagoula, Mississippi - Responsible for coordination of engineering design and field construction; Design and modify substation layout, underground duct banks, 4.16 KV, 2.4 KV & 480 V motor control schematics; Testing and commissioning of UPS systems up to 75 KVA.

1979 - 1981

Senior Field Construction Specialist, Fluor Arabia Ltd. - Saudi Arabia

Saudi Arabia - Duties included check out and start up of water injection plants, revamp of gas oil separation plant. Commissioning of emergency power distribution system and improvement to station services. Worked on motors up to 4000 hp and 25 MW gas turbine generators.

1979 - 1975

Maintenance / Start up Electrical Engineer, Brown and Root Inc., - Houston TX

Baytown, Texas - Duties included maintenance and troubleshooting inverter, variable speed drives dc drives and large synchronous motors. Designed and purchase electrical equipment for plant modifications.

Education & Professional Affiliations

Bachelor of Science in Electrical Engineering, Texas A & I University at Kingsville, Texas – 1975

Additional Courses:

Quality Assurance, Quality Control

Maintenance Supervision

Electrical Blue prints, Power Distribution, and Cable Termination

Submitted paper (not published) for cable ampacity calculations buried in permafrost regions.

Software:

E.T.A.P.

Mathcad

Excel

Developed Excel Program & templates for Load List, Cable Sizing, & MCC design; Submitted for Copyright (2007).

Mathcad routines for relay settings, Arc Flash calculations, co-ordination curves, sag & tension calculations, short circuit and voltage drop calculations.

Registrations/Affiliations

P.E. Texas license No. 60184 (7/17/1986) to (6/30/2016)

P.E. Alaska license No. 10248 (12/28/2000) to (12/31/2015)

P.E. Illinois license No. 062-055218 (12/4/2001) to (11/30/2015)

P.E. Arizona license No. 37476 (2/12/2002) to (3/31/2017)

P.E. Alberta license No. 90763 (2007) (Inactive since (April-2012)

P.E. Mississippi license No. 18237 (12/31/2007) to (12/31/2015)

Membership - I.E.E.E. No. 7611528 since 1978 (Inactive since (Dec-2013)

PUBLICATIONS/PRESENTATIONS

Presented following paper to local IEEE conference

Thaw Bulb Formations and Ampacity Calculations for Direct Buried Power Cables in Permafrost Regions

Developed software for ELECTRICAL ENGINEERING DESIGN CALCULATIONS

United States Copyright Certificate of Registration Number TXu 1-682-175

DATED October 6, 2010.

Title, “Load List, Cable Schedule and MCC Design”

SPECIFIC TECHNICAL EXPERTISE/SPECIALIST COURSES

Attended 2007 60th Annual Conference for Protective Relay Engineers; March 27-29, 2007.

Attended GE Multilin seminars on Distribution Substation Protection; March 31st, 2008 in College Station, Texas.

Attended ETAP Training Class Transient Stability Houston

Ellis partners: Cable cleats and cable fixings DOHA

Power cable- Conductor, alloys, hardness, temper, coatings, stranding factors, void ratio formulas, shapes, chemistry of polymer insulation, properties, insulation types, applications, & manufacturing

Ester dielectric fluids for transformers: fire safe, high moisture tolerance and high temperature operation - in accordance with IEC-61099. DOHA

Site visit to cable Mfr plant Qatar international cables company Mesaeed industrial city

Schneider electric presentation & energy management solutions DOHA

Schneider-electric Power transformer protection calculations and CT sizing calculations DOHA

Provided in House Training Classes to Electrical Group (various electrical industry topics in Houston and Doha).

Contact this candidate