Oil & Gas

Yanier Pulido

***** **** ** ****. ***.: +1-818-***-****

Lancaster, California. 93535. USA +1-661-***-****

acrjsn@r.postjobfree.com

acrjsn@r.postjobfree.com

Objective

To obtain a position as a Processes Engineer or Chemical Engineer in a Petroleum or Petrochemical Co. with responsibilities for engineering projects, processes simulation, pre- commissioning, commissioning, start-up, processes monitoring & production optimization. Currently seeking a position that would challenge my technical abilities, tap my professional skills and meet my professional expectations to apply all aspects of basic-conceptual & detail engineering, industrial safety and environmental controls. Summary of Qualifications

- Bilingual: English - Spanish.

- Lead and evaluate engineering projects in the Process Engineering field.

- Design and development of oil & gas projects in conceptual, basic and detailed engineering, following standards API, ASTM, ASME, GPSA, NACE, NFPA, ANSI, Ecopetrol and PDVSA.

- Simulation of Petroleum and Petrochemical Processes handling ASPEN Plus, HYSYS, Pro/II, CHEMCAD, PIPEPHASE, MATLAB, and computer aided design software (AutoCAD, 3D Studio Max).

- Development of PFD’s and P&ID’s.

- Elaborate Mass & Heat Balance.

- Strong knowledge on industrial corrosion; surfactants and applications; engineering of air pollution control.

- Evaluate and select chemical treatment for oil & gas production.

- Handling of Windows, Word, Excel, Power Point, MS Project and Lotus Notes. Experience

December 2014 – May 2015

Process Engineer / Lead Project Engineer – SGS-ETSA. Bogota – Colombia. Responsibilities:

- Lead and evaluate engineering projects for Natural Gas industry.

- Evaluate engineering projects for natural gas in conceptual, basic and detailed engineering in the process engineering discipline, following standards API, ASTM, ASME, GPSA, NACE, NFPA, ANSI, Ecopetrol and PDVSA.

- Evaluate Process simulation using ASPEN Plus, HYSYS, Pro/II, and PIPEPHASE.

- Pre-commissioning, commissioning, start-up and stabilization of natural gas plants.

- Design engineering projects for natural gas transport.

- Design, specify and simulate pressure vessels, sludge catchers, tanks, heat exchangers, pumps, compressors and pipelines.

- Design and specify pipelines for hydrocarbon transportation.

- Evaluate Mass & Heat Balance.

- Evaluate PFD’s and P&ID’s.

Oil & Gas

August 2014 – Current

Lead Process Engineer – Process & Support. Bogota – Colombia. Responsibilities:

- Lead and evaluate engineering project in the Process Engineering field.

- Evaluate, develop and execute Oil & Gas projects in conceptual, basic and detailed engineering in the process engineering discipline, following standards API, ASTM, ASME, GPSA, NACE, NFPA, ANSI, Ecopetrol and PDVSA.

- Process simulation using ASPEN Plus, HYSYS, Pro/II, CHEMCAD and PIPEPHASE.

- Pre-commissioning, commissioning, start-up and stabilization of natural gas plants and oil production facilities.

- Design engineering project for crude oil production facilities for upstream processes

(dehydration, stabilization and desalted).

- Design engineering projects for natural gas production on sweetening (ammonia plants, sulfa treat, membranes technologies) and dehydration processes (glycol plants).

- Design engineering projects for power generation using natural gas.

- Design, specify and simulate free water knock out, pressure vessels, sludge catchers, distillation towers, chemical reactors, heat exchangers, cooling towers, pumps, compressors and pipelines.

- Design and specify pipelines for hydrocarbon transportation.

- Elaborate Mass & Heat Balance.

- Elaborate PFD’s and P&ID’s.

December 2013 – July 2014

Senior Process Engineer / Project Engineer – IDS Colombia. Bogota – Colombia. Responsibilities:

- Lead and evaluate engineering project in the Process Engineering field.

- Evaluate, develop and execute Oil & Gas projects in conceptual, basic and detailed engineering in the process engineering discipline, following standards API, ASTM, ASME, GPSA, NACE, NFPA, ANSI, Ecopetrol and PDVSA.

- Process simulationusing ASPEN Plus, HYSYS, Pro/II, CHEMCAD and PIPEPHASE.

- Design engineering project for Crude Oil production facilities for upstream processes.

- Design engineering projects for natural gas production on sweetening and dehydration processes.

- Design engineering projects for hydrocarbons transportation.

- Development of detailed engineering for over pressure systems in PLG transportation, in the process design of PSV, K.O. drum, flares, flame arresting and vent pipelines using API 520, API 521, API 526 and GPSA.

- Design, specify and simulate free water knock out, pressure vessels, sludge catchers, distillation towers, condensers, reboilers, tanks, chemical reactors, heat exchangers, cooling towers, pumps, compressors and pipelines.

- Design and specify pipelines for hydrocarbon transportation.

- Elaborate bases & design criteria, processes handbook and process philosophy documents.

- Elaborate PFD’s, P&ID’s and Mass & Heat Balance. Oil & Gas

October 2012 – November 2013

Senior Process Engineer – SNC-Lavalin. Bogota – Colombia. Responsibilities:

- Lead and evaluate engineering project in the Process Engineering field.

- Evaluate, develop and execute Oil & Gas Projects in Conceptual, Basic and Detailed Engineering in the Process Engineering discipline, following standards API, ASTM, ASME, GPSA, NACE, NFPA, ANSI, Ecopetrol and PDVSA.

- Crude Oil production on Dehydration, Stabilization, Desalted (upstream processes).

- Gas production on sweetening and dehydration processes.

- Design and simulate Free Water Knock Out, Pressure Vessels, Sludge Catchers, Distillation Towers, Condensers, Reboilers, Tanks, Chemical Reactors, Heat Exchangers, Cooling Towers, Pumps, Compressors and Pipelines.

- Design and specify pipelines for hydrocarbon transportation.

- Process simulation with: ASPEN Plus, HYSYS, Pro/II, CHEMCAD and PIPEPHASE.

- Injection Water Projects for EOR. Design, specify and simulate injection pumps, booster pumps, pipelines, deaerator tower and pressure relief valves.

- Naphtha Pipeline Project and pipelines systems.

- Elaborate PFD and P&ID s.

- Elaborate operating philosophy documents and Process Handbooks.

- Elaborate Mass & Energy Balance.

- Coordinate and advise specialist process engineers and junior process engineers.

March 2012 – October 2012

Specialist Process Engineer – Dyprotec S.A.S. Bogota – Colombia. Responsibilities:

- SARDINATA Natural Gas Plant Project. Engineering design, Pre-commissioning, Commissioning, Start-up and stabilization of a natural gas plant. Skid units: inlet and sales Gas Compressors, Joule-Thompson, Membrane treatment, Glycol regeneration, Measurement and Analysis of sale gas, Pressure Flare, Pressure Vessels, K.O. Drums, Scrubbers, Pumps, Pipelines and Air Compression. Control and Instrumentation.

- Gas production on sweetening (Ammonia plants, Sulfa treat, Membrane technologies) and dehydration processes (Glycol plants).

- Crude Oil production facilities for upstream processes.

February 2012 – March 2012.

Mud Engineer – Power Petroleum International Co, Limited - Colombia. Responsibilities:

- Drilling of wells for oil production.

- Formulate and Monitor Drilling fluids base Oil and Water, physic-chemical analysis for drilling fluids (Rheology, HPHT, filtrate API, MBT, chlorides, alkalinity, salinity), drilling processes, and hydraulic specifications.

- Hydraulic calculations, controlformation pressures, adding productsto improvemud propertiessuch as density,rheology, pH, filtrationinhibitors, corrosion inhibitors, lubricationdragcuts,permeability, minimizingformation damage.

- Fluent communication in English with foreign staff and other cultures.

- Working in rotating shifts.

Oil & Gas

October 2010 – December 2011.

Specialist Engineer in Health, Safety & Environment - Integrales Rocio 2008. R.L. Responsibilities:

- Industrial Management for Safety, Occupational Health, Hygiene and Environment.

- Development and Application of Industrial Safety Programs, Occupational Health, Hygiene and Environment.

- Inspections and Audits on Industrial Safety, Occupational Health, Hygiene and Environment.

- Management for Presentations and Workshops, Courses and Congresses in Industrial Safety, Occupational Health, Hygiene and Environment.

March 2010 – February 2011.

University Professor. UNEFA.

Responsibilities:

- University Teacherin mattersofAnalysis and Design of Systems.

- Management ofgroups andteam evaluation.

- Preparationof lectureswithPowerPoint.

January 2009 – January 2012.

Advisor Process Engineer.

Responsibilities:

- Consulting engineer in oil production processes, natural gas processing, water disposal.

- Analysis of natural gas processing plants: amine plants, glycol plants, membranes systems.

- Analysis of crude oil facilities: separation processes, dehydration, desalting anddemulsification.

- Study, analysis and implementation of the Gas Processors Suppliers Association

(GPSA), Standards ASME, ASTM, API, NFPA, NACE and Engineering Guide to Selection, Specification and Process Piping Materials.

- Design and Simulate Chemical, Petroleum and Petrochemical Process using Aspen Plus, Pro/II, HYSYS, ChemCAD, Smartdraw, MatLAB.

March 2008 - December 2008.

Resident Engineer – Antomar Building Co.

- Inspection of civil works projects in roads.

- Supervision and Personnel Management.

- Plot drawing using AutoCAD.

November 2007 – February 2008.

Specialist Engineer in Drilling Fluids - ESVENCA.

- Drilling wells foroil & gas production and gas injection.

- Formulate and Monitor Drilling fluids base Oil and Water, physic-chemical analysis for drilling fluids (Rheology, HPHT, filtrate API, MBT, chlorides, alkalinity, salinity), drilling processes, and hydraulic specifications.

- Hydraulic calculations, controlformation pressures, adding productsto improvemud propertiessuch as density,rheology, pH, filtrationinhibitors, corrosion inhibitors, lubricationdragcuts,permeability, minimizingformation damage. Oil & Gas

- Supervisionofstaff.

- Workinginrotating shifts.

January 2006 – October 2007.

Technical Advisor / Processes Engineer – OILCHEM.

- JOBO-PILON Natural Gas Compression Plant Project. Design and installation of processes units: Scrubbers, heat exchangers, corrosion inhibitor system including tanks, pumps, injectors and tubing.

- Crude Oil production on Dehydration, Stabilization, Desalted (upstream processes); Distillation, Alkylation and Polymerization, Base Aromatics Production Processes, Catalytic Cracking, Catalytic Reforming, Dehydrogenation, Hydrogen Production, Hydrocracking, Hydrotreating, Isomerization, Separation Processes, Sulfur Compound Extraction and Sweetening, Visbreaking and Coking, Oxygenates Production Technologies, Hydrogen Processing, Gas-to-Liquids Technologies

(downstream processes). Chemical treatment: emulsions breakers, asphaltene, corrosion, antifoam and fouling control. Chemical and physical analysis for Crude Oil specifications.

- Gas production on sweetening (Ammonia plants, Sulfa treat, Membrane technologies) and dehydration processes (Glycol plants); chemical treatment: corrosion inhibitors programs in pipe lines and compressing plants, oxygen scavenging, fouling control.

January 2005 - November 2005.

Processes Engineer / District Representative III - NALCO Venezuela, S.C.A.

- Projects and operations of oil and natural gas in the Complex: Muscar (COM) Jusepin, SANTABARBARA (ACCRO), Amana (COA), Tejero (COT), SAEN - RESOR; Flow stations: Carito, Musipan, Muri, Compressor Plants: Tejero, Amana, Muscar, Jobo 1, Jobo 2,Pilon, Santa Barbara Extraction, Refinery Puerto La Cruz

(PLC), Jose Cryogenic Complex, Water injection Plant Monagas (PIAMO),Gas injection plants at high pressure (PIGAP 1, Whilpro, PIGAP 2), Pump Station Tejero, various producing wells in the oil fields located in Monagas and Anzoategui states, operated by PDVSA, Cerro Negro (OCN) operated by EXXON MOBIL, Boqueron production plant operated by BP, Phoenix water treatment plant.

- Project development with PDVSA East - North District and INTEVEP in the Departments: Maintenance Engineering and Mechanical Integrity, Internal Corrosion Control, Chemical Treatments, Superintendents: Natural Gas, Oil Exploration and Production.

- Oil Treatment in production processes (upstream) and refining (downstream); dosing chemical like emulsion breakers, asphaltene dispersants, corrosion inhibitors, scale inhibitors and precipitation of carbonates and sulfides inhibitors.

- Oil wells stimulation programs, enhanced oil recovery (EOR) by addition of alkalis, surfactants and water-polymer.

- Treatment of Natural Gas in production processes with chemical dosing programs for inhibition of internal corrosion, H2S scavengers, O2 scavengers, applied to pipelines and compressor stations.

- Chemical treatment for water used in secondary recovery processes, cooling water systems and steam generation; chemical dosing for pH adjustment, solids control, emulsion breakers, scale inhibitors and microbiological control. Oil & Gas

- Monitoring, simulation and process optimization (upstream and downstream).

- Management systems for internal corrosion monitoring (coupons and probes, instrumentation systems), monitor operations with retrieval tool and inspection of intelligent and cleaning runs.

- Preparation of technical reports and statistics of process conditions and treatment.

February 2004 - January 2005.

Processes Engineer / Application Engineer- NALCO Venezuela, S.C.A.

- Gas production on sweetening (Ammonia plants, Sulfa treat, Membrane technologies) and dehydration processes (Glycol plants); chemical treatment: corrosion inhibitors programs in pipe lines and compressing plants, oxygen scavenging, fouling control.

- Crude Oil production facilities for upstream processes. Chemical treatment: emulsions breakers, asphaltene, corrosion, antifoam and fouling control. Chemical and physical analysis for Crude Oil specifications.

- Water treatment used on secondary recuperation processes in oil field wells (EOR); cooling water systems and vapor generation; microbiological control, corrosion inhibition, scale inhibition, water clarification and oxygen scavenging.

- Responsibilities for oil, gas and water treatment included processes monitoring and simulation on upstream & downstream operations (pressure vessels, pipelines, tanks, FWKO, heater treater, separators, heat exchangers), chemical dosage adjust, sample analysis, handling of corrosion monitoring system (coupons, probes, non-destructive examination programs, injectors and instrumentation kits), corrosion rate analysis, chemical consume analysis. Elaborate technical reports and statistics of processes conditions to optimize treatment, production and processes.

June 2001 - January 2004.

Process Engineer - Petrozuata.

- PETROZUATA – VEHOP Project (Venezuela Extra Heavy Oil Project). Develop of PFD’s and P&ID’s, layout of industrial equipment and pipeline.

- Elaborate Mass & Energy Balance.

- Install the New Low Pressure Flare in PETROZUATA – VEHOP Project (Venezuela Extra Heavy Oil Project). P&ID’s, Plot Plan and isometric drawings reading, layout of industrial equipment and pipeline.

- Elaborate Safe Working Methods. Implementing job descriptions and monitoring dangerous conditions, risk management control, accident report. OSHA, ANSI, HAZOP, LOPSYMAT methods.

- Safety training in dangerous atmosphere with H2S. Oil & Gas

Education

MASTER IN PROJECT MANAGEMENT - Design, Manage& Supervise Projects Currently pursuing

Centro Panamericano de Estudios Superiores. Spain, Mexico & Colombia. B.S. CHEMICAL ENGINEER - July 2001

Universidad de los Andes (ULA). Merida - Venezuela. Major in Petroleum, Refining and Petrochemical Processes. B.S. CHEMICAL ENGINEER - Validated - October 2011

Ministerio de Educacion Nacional - Bogota - Republic of Colombia. Resolution #: 9798.

CREDENTIAL EVALUATION AND AUTHENTICATION REPORT

WES. World Education Services. New York, NY. USA. December 29, 2008. Bachelor’s degree in Chemical Engineering from an accredited institution. Reference #: 2154483

REGISTERED PROFESSIONAL ENGINEER IN VENEZUELA

Professional Association of Engineers from Venezuela Professional Registry #: 129971

REGISTERED PROFESSIONAL ENGINEER IN COLOMBIA

Professional Counsel of Chemical Engineers from Colombia Professional Registry #: 15318

Referrals

* Ivan Enrique Pulido, Hewlett Packard, Account Support Manager. +57-320-*******.

* Nestor Dario Pulido. Jardines Los Andes, Technical Manager. +57-314-*******.

* Oswaldo Garcia, District Manager, Nalco Venezuela. +58-416-*******.

* Eduardo (Ed) Rubalcava, Exxon Mobil, OIMS Advisor, Upstream CSHE.

+1-713-*******.

Memberships

Member of Chemical Engineering, Hydrocarbon Processes, Chemical Processes, Offshore Engineer & World Oil.

Workshops, Seminars & Symposiums

FirstInterdisciplinaryHealthErgonomics. June 17-18, 2011. Medical School ofMerida State. Integrales Rocio 2008,R.L.

June 2, 2006: 3rd National Symposium of Surfactants and Applications. FIRP-ULA. Merida, Venezuela.

October, 2005: Safety Driving. Transit Mar. Anaco – Venezuela.

Mar-2005: Sales Manager. Wilson Learning. Caracas – Venezuela. Oil & Gas

Nov-2004: Safe T Net: Nalco-web aula.

Sept-2004: Safety Training Program. Nalco. Anaco – Venezuela.

Aug-2004: Quality Administration System. Nalco-web aula.

May, 2004: ISO 9001:2000 Training. Anaco – Venezuela.

Nov-2003: JORNAGAS. The Andes University. Merida – Venezuela.

September, 2002: Administrative Assistant Mention Oil Payroll. CALCA. Merida – Venezuela.

June, 2002: 1st Ibero-American Congress of Chemical Engineering. ULA. Merida - Venezuela.

July-2001: Workshop on working safe on atmosphere containing H2S.

Jan-2001: 1st Symposium on Oil Production and Exploration. The Andes University. Merida – Venezuela.

Sept-2000: Workshop on Distillation towers, chemical reactors, heat exchangers, air compressors, pumps and piping. Workshop given by The Andes University, Merida, Venezuela.

Nov-1998: 1st National Symposium of Surfactants. The Andes University. Merida – Venezuela.

IV Latino-America Congress of Chemical Engineering. The Andes University. Merida – Venezuela.

Nov-1997. Symposium of Oil Refining. The Andes University. Merida – Venezuela.

English as a second language- The Andes University. 1996 to 1997.

Seminar on structure and behavior of Alkaloids, 1998.

1st National Congress of Chemical Engineering Students. Carabobo University. Valencia – Venezuela.

1st Seminar on handling and disposal of industrial waste, The Andes University, 1996.

Contact this candidate