Konstantinos MATEGAKIS

ADDRESS: Agiou Nektariou *50 GLYFADA, ATTIKI Postal Code: 16562 Greece

PHONE NO: 003***********

E-MAIL ADDRESS: acri6j@r.postjobfree.com

MARITAL STATUS: Married

NATIONALITY: Hellas (GREEK)

DATE OF BIRTH: 11/07/1964

http://www.linkedin.com/pub/konstantinos-mategakis/64/182/129 OCCUPATION FIELD: TRUCTURAL - COMPOSITE MATERIAL

TECHNICIAN.

PROFILE

EDUCATION

Name of Institute: HELLENIC AIR FORCE NCO TECHNICAL ACADEMY Years Studied: 20/10/1982 – 20/09/1984

PROFESSIONAL QUALIFICATIONS

• Certificate of Completion in MISSILE THEORY- STRUCTURE FRAME - AVIONICS on 10th of May 1994 at MATRA- MBDA FRANCH.

• Certificate of Completion in AC SHEET METAL BASIC COURSE on 19th of July 1994 at OLYMPIC AIRWAYS.

• Certificate of Completion in Aircraft Battle Damage Repair (ABDR) on 24th of May 1996 at State Aircraft Factory.

• Certificate of Completion in MISSILE THEORY- STRUCTURE FRAME - NAVIGABILITY and PROPOTIONAL NAVIGATION on 31st of August 1998 at Aerospatiale FRANCH.

• Certificate of Completion in AIRFRAME STATIC TEST on 11th of January 1999 at DASSAULT AVIATION.

• Certificate of Completion in English Language – Technical English on 27th of July 2007 at HAF /English Training Center.

• Certificate of Completion in BATTERY Component TRAINING (SHAFT, MARATHON, AERODESING) on 16th of July 2011 at Olympic Engineering S.A Training Center.

• Certificate of Completion in Human Factors in Aviation Maintenance on 25th of July 2011 at Olympic Engineering S.A Training Center.

• Certificate of Completion in AIRBUS FAMILY STRUCTURAL REPAIR TRAINING COURSE on 06th of March 2012 at Olympic Engineering S.A Training Center with Certification No: C 6046.

INCLUDING:

• General Introduction

• Source Documentation

• Damage Assessment

• Structures Generals

• SRM Repairs.

The Training Material analysis which is officially from manufacturer includes:

-STRUCTURE DESIGN.

-STRUCTURE DAMAGE.

- ALLOWABLE DAMAGE OPTIMIZATION.

- DAMAGE MAPPING.

- AIRBUS DOCUMENTATION-SRM

- DRAWINGS SET.

- STRUCTURE DAMAGES TYPES.

- DAMAGE ASSESSMENT.

- CORROSION TYPES AND CONTROL.

- REPAIR PHILOSOPHY.

- SPECIAL FASTENERS AND JOINT POLICY:

- HI LOK,

- HI TIGUE,

- LOCK BOLT,

- TAPER LOK.

- COLD WORKING METHOD- INTERFERENCE FIT.

- MATERIAL- SELECTION AND DESIGNATION.

• Certificate of Completion in Fuel Tank Safety on 27th of October 2011 at Olympic Engineering S.A Training Center with Certification No: C 8526.

• Certificate of Completion in EWIS II (Electrical Wiring Interconnection System) on 18th of April 2012 at Olympic Engineering S.A Training Center with Certification No: C 6087.

• Certificate of Completion in Aviation Legislation on 08th of March 2012 at Olympic Engineering S.A Training Center with Certification No: C 6060.

• Certificate of technical briefing for production and repair of “COMPOSITE CONSTRUCTED COMPONETS” on 04th of November 2012 at RODER PRAZITION GmbH in GERMANY.

INCLUDING:

• Damage Identification and Assessment (Coin tap inspection, Thermographie)

• Damage Removal and Core removal Procedure (sanding, Prepare of carbon and GRP repair).

• Wet Lay Up Repair (monolithic part, Honeycomb part).

• Hot bonder Repair (wet lay up and prepreg procedure).

• Vacuum Bagging Procedure (breath, peel ply etc).

• Mould design and Production.

• On- Site instruction (work with composite specialist on different parts).

EDUCATIONAL SEMINARS

05/ 1992 Topic: SALES MANAGEMENT at INTERAMERICAN

04/2008 Topic: QUALITY MANAGEMENT at HAFCS.

06/2009 Topic: MANAGEMENT PRINCIPLE –ADMINISTRATION at HAF EDUCATIONAL CENTER.

WORK EXPERIENCE

Company: AEROPLEX (HUNGARY)

Job Title: SHEET METAL TECHNICIAN

Dates Worked: 20/04/2015 – 30/04/2015 (CONTRACT)

{HEAVY MAINTENANCE C CHECK ON BOEING 737 /800/600 UT-AIR VP- BYL/ NORWIND AIRLINES VP-BOW}.

Company: LOT AIRCRAFT MAINTENANCE SERVICES (POLAND) Job Title: SHEET METAL TECHNICIAN-FITTER (INTERIOR) AUTHORIZED - QUALIFIED by LOT AMS QUALITY DEPARTMENT (No STAMP: PL.145.003/K02393)

Dates Worked: 15/09/2014 – 4/12/2014.(CONTRACT)

C-CHECK HEAVY MAINTENANCE ON BOEING 767 (NEOS AIRLINES), REDELIVERY CHECK ON EMBRAER E-170 (AIR BURKINA), C-CHECK HEAVY MAINTENANCE ON E-170/190 (AIR BULGARIA, LOT, AIR LITUANIA).

Company: ALENIA AERMACCHI FINMECCANICA

Job Title: 4th Level SHEET METAL TECHNICIAN.

Dates Worked: 20/02/2014 – TO PRESENT (CONTRACT)

ATR 72 /42 PRODUCTION LINE (FUSELAGE).

Company: SR TECHNICS (SWITZERLAND)

Job Title SHEET METAL TECHNICIAN.

Dates Worked: 14/01/2014 – 08/02/2014 (CONTRACT)

{A320 (SWISS AIRLINES) RESKINNING, A340 (QATAR) HEAVY MAINTENANCE}, A330 (LUFTHANSA) HEAVY MAINTENANCE, A330

(AEROFLOT) SERVICE BULLETIN working out.

Company: AEROPLEX (HUNGARY)

Job Title: SHEET METAL TECHNICIAN

Dates Worked: 25/11/2013 – 15/12/2013 (CONTRACT)

{A321 (AIRBERLIN) D CHECK}

Company: Apella S.A

Job Title: Structural – Composite Mechanic.

Dates Worked: 05/2010 – 13-01-2014

Outline a description of my duties and responsibilities

• Lay out of sheet metal parts using blueprints, drawings, written or verbal instructions.

• FITTING

• Alter an existing part using blueprints, drawings, written or verbal instructions.

• Rivet and sheet metal component removal.

• Bend and form a radius on fabricated sheet metal parts.

• Drill various metals.

• Install blind rivets and fasteners.

• Inspector of Overhaul maintenance of Outer Flaps of M53-P2 MIRAGE engine including : repair, reforming, cut-off patches and install patches.

• Structural – Composite Material repairs on A/C’s: Airbus Family (A318/ A319/ A320/ A321), Bombardier Dash 8 /Q400- Q100, Gulstream V, RJ 146, BOEING 737 200/300/400., CESSNA 550 CITATION II-CARAVAN- 172, CIRRUS FAMILY, DIAMOND DA40 Family, PIPER NAVAJO CHIEFTAIN, and AGUSTA 109. HELLENIC AIR FORCE - From 10/1982 to 01/2010

Outline a description of my duties and responsibilities

• 10/1984-03/1989

Flight line Maintenance on A/C’s F/TF-104G

Job Title: Airframe Mechanic.

• 03/1989-04/1992

Flight line Maintenance on A/C’s MIRAGE 2000 EGME/BGM Job Title: Structural – COMPOSITE INSPECTOR.

• 04/1992-02/2000

AC’s Missiles – Pylons, Structural – Avionics Depot Level Maintenance. Job Title: Structural – COMPOSITE MATERIAL -AVIONICS INSPECTOR.

• 02/2000 – 05/2006

Flight line Maintenance on A/C’s C-130H, YS-11, CL-215, Embraer ERJ 135, Gulfstream V.

Job Title: Structural – COMPOSITE MATERIAL Mechanic.

• 05/2006-1/2010

Job Title: Staff Officer of HAFSC responsible for: SAFETY MEASURE IMPLEMENTATION, DEVELOPMENT –ISSUING AIRCRAFT –MISSILE MAINTENANCE SYSTEM, OUALITY CONTROL ON AIRCRAFT and MISSILE MAINTENANCE.

MEMBER of EUROPEAN CONSORTIUMS FOR THE PRODUCTION OF DEFENSE PROGRAMS for the German Federal Office of Defence, Technology and Procurement (BWB).

SKILLS

• Excellent knowledge of MS Office (Word, Excel, power Point),

• Programming In Atlas Language.

• Excellent knowledge of English (writing and speaking) REFERENCES References available upon request.

Contact this candidate