JOSE G. CEDENO

**** ** ******** ***.

Port Saint Lucie, FL 34953 acr3l5@r.postjobfree.com

Cell : 505-***-****

OBJECTIVE AND PROFESSIONAL EXPERIENCE

My interest’s lie in assisting your organization with my technical, engineering, design, procurement, construction, planning and managerial leadership skills developed in the past, combined with my education and apply them into a respective position. I most recently completed a Bachelors degree program in Management.

AREAS OF EXPERTISE: Self starter with the ability to encompass organizational needs along with current workforce parameters and mesh all parties to an obtainable organizational goal by incorporating financial, workforce, customer interest and profitability parameters on a domestic and global scale.

Career Industry Involvement

-Energy/Project Management/Photo-voltaic/ High Voltage System Design/Hospital

facilities construction.

Florida Power and Light/BHI Energy Power Services, Niagara Mohawk Power

Corporation/ DKD Electric/ Emcore Corp. High Voltage and Solar system design, Field

personnel management, and project implementation, from project concept to project

implementation.

-Financial/Accounting/Bookkeeping/Customer Service

Niagara Mohawk Power Corporation/Bank of America.

- Semiconductor/High Technologies/Solar R&D-

•Poly Flow Engineering/ Air Products and Chemicals- Chemical Delivery Systems. Recent responsibilities incorporated the Research and Development of Intel's future processor development from 12nm to 9nm technologies in the planarization sector. Also incorporating the training and certification of all associated personnel as well as documenting and driving all new accepted process development across all virtual factory sites, Oregon, Israel, Arizona, and Ireland. I installed approx. 15 tool sets approximating at a minimum of 15 million for Air Products and Chemicals. In addition, I submitted a patent for a flow controller simulator that I designed and built a prototype that I designed and built and implemented for field use. It minimized a troubleshooting tool that took a 4 hour labor cost, to a 5 minute troubleshooting tool through the HMI and PLC system. In addition it eliminated the Intel safety issue of breaking the 208V 3 phase plane, enabling Intel Process Engineering that time frame for continuous process flow. Experience with Auto-Cad, Revit, Solid Works and other 3D design associated software programs.

•Nikon Precision Inc.- Installation of Nikon latest Laser exposure equipment for Intel at their AZ and NM sites. This would be for the Photolithography sector. Total installed was 13@ $64,000.000.00 per tool.

•Unaxis USA Inc. Successfully troubleshooted a prototype photovoltaic tool for Emcore for R&D development issues that allowed Orlikon to aquisition Unaxis for future advancement.

•Intel Corp. Succesfully integrated the 1262 process, Pentium IV from OR to NM for High Volume manufacturing process. Held multiple positions from, Equipment technician, operations, process, chemical delivery, defect-metrology, and was a lead trainer for 4 shifts for the process transfer of 120 technicians. Lead trainer for EEW ( Energized Electrical Work ). Diffusion, Wet and Dry etch, Defect metrology, Lithography front and back end experience. 6 to 12 inch technology transitions with training to all significant technicians.

(See below for details)

Florida Power and Light

901 Northpoint Parkway Ste. 200 West Palm Beach, FL 33407

Electric Distribution Engineer December 2014 to Present

In conjunction with BHI Energy Power Services, my position consists of the incorporation of my past 30+ years of experience in the electrical, electronic, High Technology, alternative energy resource and project management experience and education and administer this to a population of approx. 150 computer design technicians in order to address Florida Power and Light's Distribution Infrastructure to a Hardening standard of hurricane forceses of winds up to 145 miles/hr. via design software simulation programs and implement these designs to FPL for field implementation and construction. I.E. DM-Desisgn Manager, Pole Foreman-3D Imaging, GIS, Google Maps, Pole Boring for Concrete Pole installations, WM-Work Manager for inventory/construction accounting purposes.

Poly Flow Engineering/Air Products and Chemicals

10800 Gibson Blvd. Albuquerque, NM 87123

Senior Field Service Engineer April 2011 to April 2014.

Focusing on the Virtual Factory Support for Intel Corporation personnel and also inclusive, Installing retrofitting and maintenance of Flow Master Slurry chemical delivery systems for Intel Corporation.

Components consist of Levitronix Motors and Motor controllers, Allen Bradley PLC, HMI and SCADA systems. Multi-tasked with the Quality Dept. in order to ensure proper tool functionality through testing.

Latest achievement was the installation of multiple Flow Master and Chem Blend tool sets and Fab start up of Intel's latest Fab D1X. I also have D1C, D1D, F11X and F32 experience. Prior to embarking on my last assignment to D1X, I assisted in the meshing of Poly Flow Engineering and Air Products ECR process flow and FSE training levels. Sought improvement activities in order to meet customer expectations with regards to measurable improvement installation responsibilities which include duration, quality, tool reliability, development and customer retention relationships. Experience in SAP.

Assisted in the training of three additional FSE's to senior level.

In addition, expanded expertise to include quoting responsibilities for customer requests for component, field service support and travel for all Intel virtual factory sites. Submittal of electronic simulator for patent submittal for Air Products and Chemicals that I designed and built a prototype at customers request (Intel).

Nikon Precision Inc.

1399 Shoreway Road Belmont, CA 94002

Field Service Engineer November 2010 to April 2011

In conjunction with Think Resources, my position consisted of domestic tool installations for Intel Corporation in multiple locations, in order to meet timelines for new upcoming technologies. Equipment involved includes the latest Photolithography laser scanners, which Nikon can provide. All efforts completed in a team environment and within all customer safety requirements and expectations.

Albuquerque Police Department

400 Roma Ave. Albuquerque, New Mexico 87102

Data Entry Representative September 2010 to November 2010

In conjunction with Select Staffing, project entailed data entry to current data base system with objective of making data compatible for migration to future forecasted system in order to allow real time data base establishment and maintenance. In addition to said systems, networking with vital record data systems would also be implemented. Efforts were in conjunction with Home Land Security and anti-terrorism efforts.

DKD Electric LLC

6801 Academy Parkway Albuquerque, New Mexico 87109

Electrical Project Manager August 18 2008 to January 27 2009

Managerial responsibilities for multiple construction projects. Projects consisted of, but not limited to, all aspects from contract bidding to budget establishment to project and personnel coordination in the field and material, inventory and vendor management. Emphasis on project development, budget and completion timeframe accomplishment for ultimate efficiency. In addition to electrical responsibilities are fire alarm, emergency and communications systems. Project budgets ranged from $300,000.00 USD to $500,000.00. Project change calculations varyied from minor to major changes involving company direct involvement to also include any subcontract entities. All efforts within project spectrum involve compliance to all regulatory, contractural and governmental regulations involving safety and construction specification compliance, 2008 REVIT certification, experience with Auto-Cad, PDF, Microsoft office, Adobe, Etc. Recent project accomplishments include the completion of a University of New Mexico Family Health Center which incorporated a 1200 Amp 120/208V three phase pad mounted service and the incorporation of a 225KVA 277/480V secondary pad mounted transformer for radiology applications.

Bank of America

Picabo Street Rio Rancho 87124

Bilingual Customer Service Specialist May 2007 to August 2008

Maintenance of client’s financial deposit accounts with the utilization of various Microsoft and DOS computer systems and bilingual linguistics. Catalist for team efficiency, accuracy and number one in customer satisfaction surveys for Global Communication Center.

Unaxis USA Inc.

10050 16th Street North #100 Saint Petersburg Florida 33716

Field Service Engineer Jan.2006 to July2006

Installation, repair and retrofitting of Plasma Semi-conductor Equipment. Latest assignment was installation of equipment sets for KANC (Korea Advanced Nano Fab Center) in South Korea. Equipment sets included Electrical AC and DC, chemical gases, RF frequencies, Pneumatic valve control systems, computer networking systems through computer server and communication applications, High Vacuum to negative values utilizing Turbo dry vacuum pumps as well as lower vacuum pumps for process stabilization purposes. Additional variable systems included mechanical robotic entities, and computer application variation solutions. Customer base consisted of Governmental, Domestic and International contracts, as well as private Research and development firms. Local customer base consisted of Sandia National Labs and Emcore Corporation, researching developments in Alternative Energy Solution Techonologies. National customer base consisted of DRS in Dallas Texas for Laser optic technology in national defense mechanisms and UCLA Engineering Research Laboratory campus for semiconductor processing research projects as well as The University of Central Florida.

Intel Corporation

4100 Sara Rd. Rio Rancho, New Mexico

Senior Equipment and Operations Technician Oct.1995 to Nov.2005

Responsibilities included Equipment maintenance, troubleshooting and repair, Quality control, Operations and Process control of 6, 8 and 12 inch technologies. Process equipment in Diffusion, Etch, Metrology and Photolithography. Examples of equipment sets include but not limited to TEL, Nikon, Axcelis, Hitachi, SEM, KLA, SCP, LAM and Tencor. Advanced Electrical Safety Instructor for the New Mexico site, Quality Team Leader and Lead Trainer for all Logic and Flash products. Latest assignment involved the latest process transfer for virtual factories. Experience in class 1-10 clean room environments, Vacuum, HVAC systems, resist, solvent and developer chemicals. Proficient in Microsoft windows programs. Remote automation control of process operations. (Diafuku and Shinko) Educational advancements include a Bachelors Degree in Applied Management. Fluent in English and Spanish.

Niagara Mohawk Power Corporation

401 Water St. Fredonia, New York 14063

Electrical Planner/Engineer for Northern Chautauqua County Dec. 1983 to Nov. 1994

Design and layout of new and redesign of existing utility structures for industrial, commercial, and residential customers. Design point of contact for 35 man lineman crew for all associated electrical construction. All Designs completed to optimum safety and efficiency standards. Project Management and employee coordination with all associated company departments and supervision, as well as customer service related contacts, Engineers, Architects, Designers, Contractors and Laborers. Co-ordination of all associated financial budget aspects of project expenditures and proper material inventory levels. Field engineered all new and located all electrical distribution and transmission facilities in conjunction with Federal, State, Local, Municipal and project requirements.

Details of above-mentioned duties incorporated: Distribution Current Load studies to substation for Generating Plant phase Stabilization. Overseeing of electrical power transmission and distribution facility analysis and design for 40 year reliability expectancy, incorporating blueprint drawings and schematics.

Examples of customer base were: Numerous UG subdivisions (10) 50-350 Home sites. Purina Corp., Wal-Mart, Cliffstar, BFI, Target, Quality Markets, Alumax, Roblin Steel, Chautauqua Institute, City of Dunkirk, NY Etc.

Layout of new and redesign of existing electrical services for Industrial, Commercial, and Residential customers. Underground distribution design. Electric services consisted of, but not limited to (120/240V 1ph, 120/208V 3ph, 277/480V 3ph, 4.8KV Delta 3ph, 13.2 KV WYE 3ph, overhead,underground and pad mounted services. ) OH and UG Street Lighting design. Manhole layout and design. Project and employee coordination with all associated company departments and Supervision, as well as customer related contacts, Engineers, Architects, Designers, Contractors and Laborers. Customer Service Representative, Accounting, Bookkeeping and computer functions. Resolution of billing inquiries with customers. Surveyed all new and located all electrical distribution and transmission facilities in conjunction with project requirements.

Details of above-mentioned duties incorporated: Distribution Current Load studies to substation for Generating Plant phase Stabilization. Analysis of 34.5KV/130KV Transmission Systems. UG Switchgears, OH Reclosures, OH Sectionalizers, UG Riser Poles 1Ph, 3Ph Dist, Service, Street Lighting. 1Ph, 3Ph Transformer Bank Design. Spanning #2, 1/0, 336.4 MCM Triplex, Quadraplex Secondary conductors. #2, 1/0, 336.4 MCM PE and Bare Primary conductors. Installation and monitoring of Ratio Transformers 4.8KVA Delta-7620KVA/13.2KVA Wye systems. Installation of primary Regulators, Capacitors for increase in voltage or regulation for systems in outlying rural areas. Primary, Secondary slack spans, pole anchoring and corner bisecting, PVC and Galv. Steel Conduit Systems designs for Customer UG and Company distribution systems. Installation of 3Ph. Motor Step Starters, and current limiters based on customers needs versus company’s ability provide said current requirements. Blueprint drawings and schematics, Arial and profile.

Easement negotiations, preparation and submittal. Tree trimming auditing, cost computation and negotiations. Joint pole/CATV agreements, negotiation, and field studies.

JOSE G. CEDENO

1162 SW Abingdon Ave.

Port Saint Lucie, FL 34953

Home: 505-***-**** acr3l5@r.postjobfree.com

EDUCATION

National American University

1601 Rio Rancho Blvd. Ste. 200, Rio Rancho, NM 87124

Award: Bachelor of Science Degree in Applied Management.

Niagara Mohawk Power Corporation

401 Water St. Fredonia, New York.

Award: Electrical Engineering Facility Design Certification, Strategic Customer Relations/Accounting Certification

Jamestown Community College

Olean Campus, Homer Street, Olean, New York

Degree: Electrical Technology, AAS

South Area BOCES Center

Windfall Rd. Olean New York

Award: Diploma Residential and Commercial wiring NEC Electrical Code and OSHA regulations

Contact this candidate