Roy p. Banaag
Governor’s Drive, Bo. Bancal
Carmona, Cavite
Email Add. : acr2go@r.postjobfree.com
Contact Nos.: +63-905*******
Mechanical Supervisor
CAREER OBJECTIVES
My focus is to secure an opportunity where I can utilize my experience, apply my skills, broaden further my knowledge, and experience while contributing to the growth of the organization.
SUMMARY OF QUALIFICATION
More than 5 year’s experience in field of millwright and pipe fitter, experienced in plant mechanic in 1 Year and 12 year’s in boiler operation in local work. And maintenance. Mechanical supervisor/QAQC Inspector all these experienced is in the field of construction of refinery, oil and gas, good knowledge Material issue and ( MS WORD AND MS EXCEL ).
PROFESSIONAL EXPERIENCE
NIPPON EXPRESS CO. LTD
PETRONAS LNG TRAIN 9 (PLNG)
SARAWAK, BINTULU MALAYSIA
MARCH 2, 2015 UP TO PRESENT
CLIENT: PETRONAS
CONTRACTOR: (JGC)
QA/QC INSPECTOR
DUTIES AND RESPONSIBILITIES INCLUDED:
In charge for the quality assurance/quality control in relevant to construction disciplines, ensuring control site surveillance, inspection and test according to approved ITP
Review and interpret approved construction plans procedure and specification to prevent error’s in implementation.
Organize work activities through proper documentation control related in construction
Attained other duties as and when instructed by QA/QC manager
Prepare inspection reports with regards to turnover document.
Submit daily reports of activities to QA/QC supervisor
Perform QCR-document works for done inspection.
Perform QA/QC functions for all parts of works
Preparation of calibration certificate’s and other related documents
Prepare daily construction activities and Quality report.
NIPPON EXPRESS CO. LTD.
PETRONAS LIQUEFIED NATURAL GAS TRAIN # 9 (PLNG)
SARAWAK, BINTULU MALAYSIA
FEBRUARY 20, 2014 UP TO PRESENT
CLIENT : PETRONAS
CONTRACTOR : Japan Gas Corporation (JGC)
MECHNICAL SUPERVISOR
Duties and Responsibilities:
Planning and Supervision of installation of different rotating equipment’s (i.e. Turbines & Compressor, Air Fin Coolers, Pumps, Fans & Blowers).
Supervision of erection of Air Fin Cooler.
Review the latest revision of documents (Drawings, Equipment Data Sheet) and ensure that the latest Drawings and specification are being used.
Coordinate interfacing work with other discipline (Civil, Electrical & Instrumentation)
Initiate RFI (Request for Inspection) for the installed equipment by Quality Control Department.
Initiate/Supervise the preservation of installed equipment’s.
Motivate workers to do hard work and always maintain cleanliness to have a safe working environment.
Perform other duties as required.
Receiving inspection and issuing of air fin cooler materials
Ensure all materials are properly identified with corresponding material specification
Responsible for assembly,erection installation and alignment of air fin cooler
Prepares and submits daily activities & progress report
Ensure the HSE program of company is properly observed and implemented
MAJOR EQUIPMENTS HANDLED
A)Rotating Equipment – Pumps
-Turbines and Compressor
-Fans and Blowers
-Air Fin Cooler
DAELIM-SAZEH CONSTTRUCTION TEAM (DSCT)
SOUTHPARS GAS DEVELOPMENT
PHASE 12, ON SHORE PROJECT
TOMBAK GHADIM IRAN
MAY 13, 2012- AUGUST 10, 2013
CONTRACTOR : DAELIM CORPORATION
MILLWRIGHT
Duties and Responsibilities:
Air fun cooler steel structural assembly
Tube bundle frame installation
Loover, plenum and fan ring assembly
Installation of fan guard and shafting assembly
Installation upper bearing / lower bearing of air fin cooler
Motor support and pulley erection
Installation /check of fan blade tip clearance and blade angle
pulley installation and belt tensioning
Check belt tension for visual inspection
Installation of pulley and leveling
Setting bolt foundation drilling seal system
Centering and setting bolt of re boiler
Erection ladder header walkway of air fin cooler
Interpret rotating details of air fin cooler
Centering and leveling of skid
Cleaning pocket holes of pump motor for erection
Check the elevation of foundation of pump motor
Centering and leveling of centrifugal air compressor
Erection of heat exchanger, vertical and horizontal
Perform final alignment for final inspection
Shaft plumbness fan ring adjustment tip clearance and pitch angle
DAEWOO E & C CO. LTD.
NAKILAT SHIP REPAIR YARD
RAS LAFFAN PROJECT, STATE OF QATAR
MAY 27, 2010 – DECEMBER 27, 2011
CLIENT : NAKILAT
MILLWRIGHT FITTER
Duties and Responsibilities:
Installation 60Hz power generator and pre-alignment
Static alignment, Frame bottom line & centerline of penstock
Leveling & centering of penstock frame
Installation/alignment four unit diesel fire pump
Installation top & bottom mounting bracket of equilibrium filling valve
Replacement/install spring base of power generator
Preparation of tools for installation and erection of power m/c
Overhauling/assembling of electric fire pump m/c
Leveling/centerline coupling hub and clean mounting bracket
Preparation of material and tools for pre-alignment
Alignment of EBARA PUMP and Patterson pump
BELLELI ENERGY S.P.A
P.O. Box 41697 HAMRIJAH FREE
ZONE, SHARJAH, UNITED ARAB EMIRATES
APRIL 27, 2009 – APRIL 30, - 2010
PIPE FITTER
Duties and Responsibilities:
Lay outing and prefabrication pipe line of fire Hydrant
Lay outing of deck bottom plate
Interpret drawing of bottom deck and floating roof inner ring
Erection and fit-up annular plate, bottom deck, shell plate
Fit up intermediate wind girder and hand rail
Fabrication of Erection Materials
Lay out/Fit-up automatic bleeder vent and rim vent
Fabricate pipe support of sand fit and cover plate
Fabricate hinge plate in & out cover plate
Preparation of materials floating roof drain sump plan
BCPI/TAPEX, Inc.
BO. MADUYA, CARMONA, CAVITE
APRIL 30, 1997 – APRIL 26, 2009
BOILER TENDER
Duties and Responsibilities :
Operated and monitoring of 8ton, 5ton, 3ton boiler (Dong Yang and Sunray Rotary Oil Burner, Made in Korea, Water Tube Type).
Water Treatment Tender, Backwashing and Regeneration of Pressure filter, Carbon Filter, Water Softener and Demineralizer Tank (included monitoring of water facilities)
Tendering of 5 nit Air Compressor GA 75 Screw type Atlas Copco with maximum of 107 psi each, 100hp.
Monitoring of Cooling tower and chiller unit.
Conduct monthly services of air compressor, change oil, air filter and oil separator.
Installation pipe line of bunker fuel and diesel oil
Monitoring of refrigerated air dyer.
Assist Korean Manpower for retubbing 2 unit of boiler water tube.
Conduct daily activities for water treatment.
Compressor piping installation and revised pipe line.
Conduct boiler flushing every six month.
Adjustment and repair of water level controls (Besto Bell Mobrey and Gestra).
Inspection/cleaning at all burner part such a nozzle, ignition, assembly, diffuser and impeller as a part of preventing.
Repair of all pump, centrifugal pump, submersible pump, feed water and steam condensate pump.
Check/ record all the pressures and temperature reading at regular intervals.
METAPHIL, INC. /PKI INC.
LUZ BANZON, JASAAN MISAMIS ORIENTAL
JANUARY 18, 1996 – MARCH 12, 1997
PLANT MECHANIC
Duties and Responsibilities:
Inspection /overhaul deepwell pump of utility area
Monitoring all pumps of fractionation area and preparation of tool materials and equipment for installation, hydrogenation and fractionation.
Overhaul/Repair of carbon bearing, mechanical seal of gear pump.
Repair/hydrotest of safety valve, fractionation boiler.
Repair/installation of nikkeso non-seal pump, nush pump centrifugal pump, booster pump and hydrogenation gas compressor.
Conducting inspection of non-seal pump and centrifugal pump.
Full out/repair gear pump and rotary pump.
Full out/installed hydrogenation gas compressor and replacement its valve seat.
Conduct hydrotest of high pressure valve, check valve
Inspection/repair of pressure safety valve.
Inspection of blower fan, cylinder, blade pitch angle and wood frame
Overhauling of air compressor
EDUCATION
Cagayan De Oro College
Carmen, Yakal St., Cagayan de Oro City
Year 1995
Course: B.S. Mechanical Engineering
PERSONAL DATA
Date of Birth : APRIL 29 1970
Place of Birth : JASAAN MISAMIS ORIENTAL
Status : MARRIED
Religion : CATHOLIC
Father's Name : ADRIANO D. BANAAG
Occupation : CARPENTER
Mother's Name : RENIZA N BANAAG
Occupation : BUSINESS WOMAN
Spouse Name : PERLITA C. BANAAG
Occupation : BUSINESS WOMAN
Children’s Name : ROLLY C. BANAAG
CHARACTER REFERENCES
GAMALLEL ALMADRONES
BECTHEL, MECHANICAL ENGINEER
acr2go@r.postjobfree.com
ERIC PACANA CORBITA
CHIYODA, PIPING ENGR
Enrique Armada
Nippon Express Co., Ltd. – Material Manager
acr2go@r.postjobfree.com