MANSOUR NOORBAKHSH, P.Eng.

acqzj4@r.postjobfree.com

*** ********** **. ******* **. L4J 5X1 • Cell: 416-***-**** Page 1 of 4

PROFESSIONAL SUMMARY

Electrical Instrumentation and control engineer for nuclear power plant projects in GEH-C

Design, installation, test and commissioning of Electrical Instrumentation and control systems in large petrochemical projects

Design, installation, test and commissioning of electrical power systems and substations

Power studies; short circuit study, coordination study, arc flash study for several industrial projects

Audition of suppliers, inspection and test during fabrication and bid evaluation in large petrochemical projects

Concept development, new developed studies of electrical and control systems in power and water production and distribution in Kish Island SUMMARY OF CORE SKILLS

Electrical Instrumentation and control of nuclear power plants, Fuel Handling I&C system

Providing full scope of DCN projects of Electrical Instrumentation and control engineering including technical specification and drawings design, test procedures, equipment selection, site inspection, commissioning

Providing project estimation, planning and vendor communications

Power studies; Coordination, Short circuit, Arc Flash and hazard mitigation study

Instrumentation & Control and electrical drawings preparation

Excellent knowledge of international and Canadian standards (CSA)

Excellent experience in engineering software; ETAP, SKM, Easypower, Auto CAD Electrical, CRC-COV, PV-SYST

Strong experience in Maintenance of electrical and I&C systems

Computer literature; MS Project and MS Office

REPRESENTATIVE PROJECTS

GE Hitachi Nuclear Energy Canada, Peterborough, ON. I&C Engineer April 2013- Present

Electrical and I&C engineer of several site support jobs for Darlington and Bruce Power including DCN, CIC and NICR packages, updating technical documents, design specifications and close out packages.

Darlington (OPG) site support and EC projects including: I&C design, equipment specification, BOM and drawings

Bruce Power site support and EC projects including: I&C design, equipment specification, BOM and drawings

Single Chanel Hot Water Test Facilities (SCHWTF); Specification, Test procedures, HAZOP study

Darlington; New Fuel Transfer Mechanism (NFTM) DC motors and controllers replacement

Darlington; Trolley Inspection Camera

Darlington; Portable Force Calibration Tool (PFCT) Design and Specification

Darlington; Port Valve Simulation design

Bruce Power; Critical Spares Assessment

MANSOUR NOORBAKHSH, P.Eng.

acqzj4@r.postjobfree.com

329 Brownridge Dr. Vaughan ON. L4J 5X1 • Cell: 416-***-**** Page 2 of 4

Bruce Power; BRIMS-PDS (Power Distribution System) Pro Watts, Inc. Toronto, ON, Electrical Engineer Mar. 2012- Apr. 2013 115/23kV, 40MVA Substation and LV (600V) E-House

Substation design lay out, single line diagram, equipment specification, BOM and power studies; load flow, short circuit study, coordination study, Arc Flash and Mitigation study

Studies and design for a solar farm project substation, PV –SYST analysis, substation design, line of sight, Bill of Material list, Load list calculation, power studies and commissioning plan.

Can-Technologies Inc. Cambridge, ON, Electrical Engineer Jan. 2011- Mar. 2012 Accomplished over 30 Industrial Projects with Coordination Study, Short circuit Study and Arc Flash Study projects (27.6 kV, 13.8 kV, 600 V, 400 V and bellow) in different industries as the following:

Gerdau Steel Co, TRW Woodstock, B&W, Sandvik, Cargill, Niagara Health System Hospitals, Sonoco, Meridian, York condominium, Magna Seating, Magna qualtech, Nestle Waters, Denso, Cooper Standard, Rich products, GTAA Terminal 3, in Ontario, Canada

Generating One line diagram, Coordination study, Mitigation study, Arc flash analysis according to CSA Z462 / NFPA 70E standards and IEEE 1584 methodology as a guide for performing AF calculations for several industrial projects

Short Circuit study, create system model under short circuit fault conditions and provide information required for completion of the Equipment Duty evaluation

Coordination study for Adjustable low voltage electronic trip and thermo-magnetic circuit breakers

Review of protection settings and flash hazard analysis including mitigation and preparing complete report of the electrical power system with 27.6 kV, 0.6kV and bellow Sustainability project – Staples Advantage, Mississauga, ON May. 2010 – Jan. 2011 I&C and Electrical Engineer of the project for sustainability certificate at Ryerson University, Toronto, ON.

Analyzed building and warehouse electricity consumption, Energy management report and recommendations for redesign electrical distribution and associated I&C of renewable energy sources.

National petrochemical Company, Asaluye, Iran 2000 - 2009 Head Electrical Engineer

Responsible for Electrical section of the EPCM Project, this EPCM project was a Methanol petrochemical plant with production capacity of 1,500000 ton per year. Methanol 132/20/11 kV, 40MVA Substation 2006 – 2009

Basic and detailed electrical design of main 132/20/11KV 40MVA substation of Methanol petrochemical project including all specifications and Single line diagrams design statement and protection philosophy, regulatory approval, BOM for yard equipment and P&C Panel, cable sizing and specification, vendor drawing review, schematic drawings and wiring diagrams.

Methanol plant Electrical equipment design 2006 – 2009 MANSOUR NOORBAKHSH, P.Eng.

acqzj4@r.postjobfree.com

329 Brownridge Dr. Vaughan ON. L4J 5X1 • Cell: 416-***-**** Page 3 of 4

Basic and detailed electrical design of pump house, including selection of electro motors and, electrical panels, cables and accessories

Electrical specifications of Low voltage and medium voltage cables, Switchgears, Transformers, Motors, Lighting and Lightening system

Detailed Emergency Diesel Generator and Emergency power distribution system

Evaluation of protection system for transformers, motors, generators, bus bars, feeders

Evaluation of hazardous location equipment and area classification drawings

Engineering evaluation and preparing specifications for cross functional interactions HDPE 132/20 kV, 40MVA Substation 2000 – 2006

This EPCM project was a High Density Poly Ethylene (HDPE) petrochemical plant with production capacity of 300000 ton per year. A Japanese company; MES was the main contractor in this project. Mansour was working in this project as EPCM resident engineer in the MES office in Tokyo and project office in Tehran.

Basic and detailed electrical design of main 132/20KV 40MVA substation of HDPE petrochemical project including all specifications and Single line diagrams Design statement and protection philosophy, regulatory approval, BOM for yard equipment and P&C Panel, cable sizing and specification, vendor drawing review, schematic drawings and wiring diagrams.

HDPE plant Electrical equipment design 2000 – 2006

Accomplished basic and detailed electrical design of Extruder main motor (11MW) of HDPE plant, including soft starter, electrical panels, cables and accessories

Inspection and test plan (ITP) for extruder main motor and soft starter and performing factory test and onsite inspection of that and other electrical equipment as Transformers, Cables and Panels in Japan, China, Indonesia, Malaysia Singapore and South Africa. Supervision of construction and maintenance of the plant Kish Water and Power Company, Kish Island, Iran 1996 – 2000 I&C and Electrical Engineer

20/11 kV, 60MVA Main Substation

Assessment of existing distribution system, preparing technical specification, getting budgetary quotation, tender (floating, evaluation and placing the order) and purchase, detailed engineering, Installation and commissioning supervision, assessment of protection quality and co-ordination, collation of all drawings and documentation. 11/0.4 kV, 2MVA Distribution Substation

Upgrading of 25 distribution substation including Transformers, Switchboards switchgears, cables, coordination and relay setting, accomplished Arial distribution line and underground distribution line, accomplished installation of an Area Operation Centre

(AOC) and several Remote Terminal Units (RTU) for electrical dispatching system, as an EPCM project.

Iranian Copper Industries Company, Kerman, Iran 1988 – 1996 I&C and Electrical Engineer

MANSOUR NOORBAKHSH, P.Eng.

acqzj4@r.postjobfree.com

329 Brownridge Dr. Vaughan ON. L4J 5X1 • Cell: 416-***-**** Page 4 of 4

Products of this company are copper and brass pipes and sheets in various ranges. In this company Mansour was assigned as Electrical Engineer during engineering phase and supervisor during construction phase.

Basic and detailed electrical design of main substation, all specifications and Single line diagrams design statement and protection philosophy, regulatory approval, BOM for yard equipment and P&C Panel, cable sizing and specification, vendor drawing review, schematic drawings and wiring diagrams.

Basic and detailed electrical and I&C design and PLC of a thickness measuring gage for cold rough milling machine

EDUCATION

Bsc. of Electrical Engineering, the University of Kerman, 1988

Sustainability Certificate, Ryerson University, Toronto, 2010

Advanced Energy Management and Auditing, the Sharif University, Tehran, 2006

Protection Relays (GE), Atrak Energy Ltd., Teheran, 2005 AFFILIATIONS

Member of Professional Engineers of Ontario (PEO) PUBLICATION

Applied PLC and industrial Instrumentation, Iran Copper Industry, 1993

National grid connection to Kish Island; possibilities and challenges, Kish Free Zone Org, 1997

Reverse Osmosis (RO) Desalination System for Kish Island, Kish Free Zone Org, 1998

Inspection and Test procedures for Electrical & Control equipment, Iran Engineering and Inspection Co. (I.E.I), 2001

Electrical safety in petrochemical plants, National petrochemical Co, Iran, 2008

Contact this candidate