Phil G. Van Goey

***** ****** ***** **** **. ****

Houston, Texas 77082

Cell: 832-***-****

Email: acqyd6@r.postjobfree.com

Summary of Experience:

** ***** ****, ********** ** piping, mechanical, structural design and drafting. Encompassing 18 years experience for the Petro-Chem industry, more specifically Upstream Drilling to Downstream i.e. Refinery, Offshore and Subsea Production areas and Onshore. In addition 10+ years of design and drafting experience in an Aerospace/NASA environment. CAD system(s) experience: 9 years of Pro/Engineer with the Pro Pipe module, 19 years of AutoCAD and Mechanical Desktop, 3 years of Bentley Autoplant, Autodesk Inventor 7 year’s experience versions 6, 7, 8, 2010 and associated Microsoft Windows programs Excel spreadsheets, MS Word, Power Point Presentations. Currently working with Unigraphics version NX 6.5 and AutoCAD 2014. Good working knowledge and use of American Petroleum Institute (API) spec's and standards, ASME standards, Military and NAS (National Aerospace Standards) spec's. Also excellent knowledge of Geometric Dimensioning and Tolerancing (G.D. & T.) per ASME 14.5Y, knowledge of ISO and DIN standards.

Experience:

Bechtel Houston, TX Talascend Agency 4/2014, current

Design Tech Specialist contract consultant Systems Design client Chevron Tahiti/Blind Faith 2 project PRE-FEED and FEED diagrams and drawings for Subsea proposed projects. Block diagrams and Layout for Topside Equipment as well as Subsea field layout for SUTA (subsea umbilical termination assemblies) Manifolds (PLEMS), Trees and (PLETS) and various other subsea equipment Plus topside HPU's, Gathering stations deck layouts ect. This was a AutoCad/cadworks 2014 format and converted to pdf layouts for Chevron i.e. the Clients requirements. This was a new and different startup venture for Bechtel who primarily is a Construction Onshore and Offshore procurement company.

Technip/Genisus Deep Water Houston, TX 10/13 to 3/14 contract consultant

SR. Designer, Subsea Installations Group Energy Tower II. Contract position through Bergaila and Associates. Procedural drawing for installing various Subsea production equipment, Suction Piles, PLETS (Pipeline End Terminations), PLEMS (Pipeline End Manifolds), In-Line Tee’s, Custom Fabricated Protective Structures with ROV access, Risers and Tensioners. Ship deck layouts, Seafastening Design and procedures. Rigging instructions and Rigging procedures. Padeye design and selection for Mudmats and Suction Piles.

FMC Technologies Inc., Houston, TX 4/11 to 6/13

Designer V, Mechanical/Piping/Structural design and drafting of rotating equipment (pumps, motors, compressors,) structures, manifolds and piping for fields layouts (FEED) subsea distribution field layouts and systems for petro-chem. industry, post drilling operations. Assigned to NATC (North American Technology Center). Designed test equipment for new manifolds and other systems as well as top-side equipment layouts and various conceptual designs for presentations and reviews. Equipment design and placement and alignment of pipe(s) and pipeline(s).

S.E.S. (Subsea Engineering Solutions) a division of Subsea 7, Houston, TX 11/08 to 2/11

Designer V, design and drafting of subsea field layout projects including the Marathon refinery and production platform in Angola, West Africa Consisting of designing, modifying and updating CAD models of piping systems, pipeline end termination units and subsea distributions systems. Cad systems AutoCAD with Bentley and Autodesk Inventor. System drawings, manifolds and manifold placement, structures, tie-in drawings, tie-in lists, line lists, material take offs and/or bills of materials. P&ID’s, ISO’s, weldments and other fabrication drawings. Prepared Power Point Presentations for design reviews and review for comment (RFC) meetings. Prepared packages for issued for construction (IFC) status.

Phil G. Van Goey, continued page 2 of 4

ASRC, AES Energy Services, Anchorage, AK 12/07 to 11/08

Designer/Principal (contract), Design and drafting of piping systems and equipment layouts, including piping ISO’s, P&ID’s. AutoCAD with Bentley Autoplant experience on BPXA (British Petroleum) and Chevron's Traders Bay projects. Field layouts and walk downs for existing and new projects. Modify existing drawings using demarcation method to meet ASRC quality specifications. Layout for FEED (Front End Engineering Design) as well and provide detail drawings of equipment vessels and piping and pipe support systems. North Slope Training and Smith Driver courses completed. BP Documentum classes completed, EDDI and HAZMAT.

Noble Drilling Corporation, Downhole Div., Houston, TX 8/03 to 8/07

Designer V/ with Field Engineering (contract), Grislee project. A grant from the National Robotics Consortium to Carnegie Mellon University and Maurer Technology, now Noble Drilling and Downhole Corporation. A downhole tool (Robotic Pig) on coiled tubing for the inspection and repair of natural gas "mains" pipeline. Design, Test, Operate and managed project. Travel to various locations for service operations. Autodesk Mechanical Desktop and Autodesk Inventor V 6,7 and 8 were used in the design and drafting process. Component selection for design improvements with close tolerance machine parts. Interface closely with fabricators and vendors required, status reports and manage project.

Hydril Company Inc., Houston, TX 7/01 to 2/03

Designer Specialist V for subsea BOP (blow-out preventors) control systems applications. Design of large structural weldments and piping of hydraulic systems for hostile subsea environments for the offshore drilling industry. Close tolerance parts, seals, hydraulics and system components, vendor interface and manufacturing interface. Pipe and tubing design for high pressure systems using Pro/Pipe, Pro/Engineer, Interlink and JD Edwards and Windchill. Electro/mechanical instrumentation and component selection for control systems and electrical interface consisting of Loop and Super Loop drawings and schematics.

Lockheed Martin NASA Contractor at Johnson Space Center, Houston, TX 12/99 to 6/01

Designer IV, security clearance and background investigation was required. Worked on the X-38 project. An emergency return spacecraft (Recovery Vehicle) for the ISS (International Space Station). Also worked on various mechanical and structural systems and custom tools for EVA (External Vehicle Activity). Also electro-mechanical systems for the HRF (Human Research Facility) space flight experiments and space flight hardware. Pro/e 2000i cad systems used, Pro/PDM and NASA's EDCC (electronic document control center) data base system.

.Johnson Engineering Inc. NASA Contractor, Houston, TX 8/98 to 12/99

Designer/Drafter IV (contract), with checking responsibilities Team lead for design and working drawings/models and checking drawings and models on Pro/Engineer 18. This project SSRMS is for the NBL (Neutral Buoyancy Lab/Weightless Environment Training Pool). The RMS (Remote Manipulator System) a simulator for the manipulator arm in the shuttle payload bay. Design of close tolerance machine drawings with geometric tolerances for hydraulic multi-axis actuators. Electrical schematics and wiring diagrams in AutoCAD 14.

Schlumberger Ltd. Inc. Houston, TX 12/96 to 8/98

Designer/Drafter IV (contract), responsible for design testing and checking drawings using Pro/Engineer 16, 17 and 19. Close tolerance machine drawings with geometric tolerances and electrical packaging. Design of down-hole tools for the Wireline Group including the "Tractor" project and other MWD (Measure While Drilling) and LWD (Logging While Drilling) downhole tools. Trained in ISO 9000 total quality certification. SPDM (Parts Data base Management) training and experience.

Phil G. Van Goey.. Continued page 3 of 4

Varco Shaffer (NOV Inc.) Houston, TX 10/94 to 12/96

Designer/Drafter IV (contract), of control systems responsible for design, testing and checking drawings using AutoCAD rl3 for Windows NT with interface with Pro/Engineer 16. Worked on conceptual design and working drawings of 4th generation Mux (electro-hydraulic multiplexing unit) project. A subsea blow out preventor control system. Design of various instrumentation structural, rotating equipment and mechanical other offshore, rig equipment.

Space Industries Inc. NASA Contractor Houston, TX 8/89 to 10/94

Designer/Drafter IV and Checker with supervisory responsibilities Worked on the conceptual design and working drawings of the "Wake Shield Facility" for NASA's CCDS (Center for the Commercialization of the Development of Space) in partnership with SVEC (the Space Vacuum Epitaxy Center) at the University of Houston. Design of mechanical/structural systems using exotic metals and composites and vacuum chamber technology. Some thermal control and electronic packaging. AutoCAD CAD systems. Extensive use of Military specifications and NAS (National Aerospace Standards) specifications. AutoCAD 12and 13, and SDRC IDEAS 3-D Solid Modeler cad systems used.

Dril-Quip Company Inc. Houston, TX 4/88 to 8/89

Draftsman III (contract) Wellheads and Christmas trees for the Subsea oil field industry. Knowledge of ANSI 14.5 and API 6A Specifications. High-pressure seals and valves, test fixtures for Subsea Wellhead Equipment. Close tolerances machine parts, weldment fabrication and forging drawings. Typical product line of casing spools, hangers, mudline systems ECT.

Vetco Gray Company Houston, TX 4/86 to 8/88

Draftsman II (contract), Valves and Wellhead equipment oil field industry. Used ANSI 14.5 and API 6A Specifications. Worked on Metal to Metal high-pressure seals using Graylock connectors as well as various other sealing systems. For use in Flow Control (valves), Subsea Wellhead Equipment and test fixtures. Worked in R & D Division, on loan to the Aerospace department. Worked on proposal for a metal to metal seal system for NASA. Trained on Computervision CAD system.

Texacraft Industries, Houston, TX 3/80 to 4/86

Draftsmen I, product design, tooling, jig and fixture, weldments and major assemblies. Plant layout, machine purchases and cost justification. Time studies, inventory control and production engineering. Piping layout system for argon gas, compressed air, water, and hydraulics for machines, welding stations, and powder coat paint system. Also designed HVAC systems and refrigeration systems.

Industrial Tool & Die & Mold Inc. South Bend, Indiana 5/75 to 8/79

Machinist Fabricator V/ Draftsman 1, completed 8,000 hours apprenticeship program through the International Association of Machinists and Aerospace Workers in conjunction with Indiana University at South Bend (IUSB) Vocational and Technical extension (IVY Tech) . Operation of various machine tools and fabrication methods. Patterns for sand casting and injection molds were the primary products. Design of Jigs and Fixtures and Special Tooling for in house use . Special machine tooling design and fabrication design were heavily practiced. Some weld shop and weld shop preps and set-ups, Arc (stick) TIG, MIG, plasma cutting and modifying existing fixture designs to suit.

Current and active member of SPED (Society of Piping Engineers and Designers)

Education: Phil G. Van Goey, Continued page 4 of 4

Rand Corporation Inc., Houston, Texas

Pro Pipe module for Pro/Engineer, Pro/Engineer CAD Software Administration

Parametric Technology Corp., Dallas, Texas

Pro/Engineer Training, basic and advanced modeling and asse

NASA Johnson Space Center, Houston, Texas

Courses on ANSI 14.5 and Geometric Tolerances, Drawing interpretations Pro/Engineer

Standardization of drawings and advanced assembly procedures Parts database management

System (Pro PDM) Weld design in Pro/E

University of Houston/Houston Community College, Houston Texas

Industrial Engineering and Mechanical Systems Design courses

NC/CNC Machining Programming and Operations

Semester hour courses and Certifications in Weldment and Fabrication Design practices

AutoDesk on-line Certification in AutoCAD 2014 previous used hands on versions since 1989

AutoDesk on-line Certification in Inventor 3D Solid Modeling with 7 years previous experience

AutoDesk on-line Certification in 3D Studio Max

PMI (Project Management Institute) on-line studies for PMP, (in process)

Massey Design and Drafting College, Houston, Texas

Mechanical/Industrial Process design and drafting with AutoCAD and AutoCAD advanced

Associate Degree in Mechanical/Industrial/Processing Design Drafting

Andrew Jackson / James Witcomb Riley High School South Bend, Indiana

Course of study: Technical, Graduated in 1976

Professional References

Frank Sklenka, Vice President of Engineering, NOV (Nation Oilwell Varco). Ph. 713- 937-5000

Curtis Leitko, Design Engineer and Supervisor, Noble Drilling Inc. Ph.281-***-****

Gene Eubanks, Project Manager Group Leader, Dril-Quip Company Inc. Ph.713- 939-7711

Jeff Meassamer, Chief Engineer at McDermott Engineering Ph. 281-***-****

Contact this candidate