W. Warren Wright, P.E.

**** ******** ***** ***** ****, OH 43123

Phone: 614-***-****

Mobile: 614-***-****

Email: acqy0u@r.postjobfree.com

PROFESSIONAL ENGINEER

CAREER OBJECTIVE

Desire position that will enable me to combine my chemical process and corrosion engineering expertise with my people, presentation, and training skills. Industrial process expertise is greatest in petroleum, petrochemical, used oil recycling, rubber processing, plastics manufacturing, solvent recycling, and waste treatment.

CAREER HISTORY AND ACCOMPLISHMENTS

25 years technical experience in corrosion, chemical and e n v i r o nmen t a l engineering in private industry plants, consulting firms, and state regulatory agencies.

Advanced experience with process, mechanical, and controls design, construction, and operation and maintenance involving aboveground storage tanks, underground storage tanks, pressure vessels, shell and tube heat exchangers, reactor systems, evaporators, stripper towers, wet and dry scrubber systems, pressure relief valves, flare systems, cooling towers, fuel systems, package boilers, thermal fluid heating systems, and loading racks.

Advanced experience with instrumentation and control of level, flow, absolute pressure, differential pressure and temperature in piping, vessels and other process equipment.

Evaluated numerous structures for corrosion visually and ultrasonically. Coordinated other methods of NDT, including radiography, magnetic particle, eddy current and liquid penetrant. Performed coatings and cathodic protection designs for system upgrades. Prepared plans and specifications for bidding and oversaw construction activities.

Strong trouble shooting/analytical skills as well as good written and oral communication skills.

Conducted training of facility and client personnel on environmental, safety, and O&M procedures;

.advanced experience with EPA, NFPA, OSHA, API regulations and industry standards EDUCATION

University of Notre Dame, Notre Dame, Indiana - B.S. Chemical Engineering

Virginia Tech Northern Virginia Campus, Fairfax, VA - M.S. Civil (Environmental) Engineering

Registered Professional Engineer, State of Ohio, E-68461

UT Level 1 Training and Qualification

NACE Corrosion Control in Petroleum Refining

EPA 24-hr. Emergency Operations Training

Certified STI SP001 Aboveground Storage Tank Inspector

Appalachian Underground Corrosion Short Course 2015 Page 2 – W. Warren Wright, P.E

CAREER HISTORY AND ACCOMPLISHMENTS

SaLUT Corrosion, Columbus, OH/Glen Burnie, MD (Corrosion Engineering Consultant) 2014- 2015 Sr. Corrosion Engineer

Performs structure corrosion evaluations, including underground and aboveground piping, tanks, pressure vessels, and support structures

Performs coatings and cathodic protection design, material specifications, installation oversight, commissioning, and ongoing monitoring

Dine Comply, Inc., Columbus, OH (Engineering/Environmental Consultant) 2013 - 2014 Senior Engineer

Performed process analysis, including material and energy balances, of asphalt shingles recycling process using oil extraction system from Crown Iron Works utilizing toluene as solvent. Worked with technology licensor and equipment vendor in developing balances with goal of minimizing toluene emissions from process so that process could be permitted in Ohio.

Developed O&M manual for solvent rag laundry wastewater treatment system. Facilitated client training on operational safety.

Performed air permitting for addition and upgrades of hydraulic presses and new SMC manufacturing unit at reinforced plastics manufacturer.

Heartland Group Holdings, Columbus, OH (Used Oil Recycling Facility) 2007 - 2012 Project Engineer/Engineering and Inspection Manager

Oversaw the process, mechanical, electrical, and structural design, construction, commissioning and start-up of a used oil re-refining facility in Columbus, OH. Activities included material and energy balances, PFDs and P&IDs for front-end (fractionation and lights/wastewater removal) and back-end

(hydrotreating) processes. Worked with third party engineering firms, technology vendors, and mechanical and electrical contractors to develop equipment, instrumentation and control system/HMI specifications and construct facility on time and within budget. Participated in factory acceptance testing of integrated control system. Heavy equipment designed and installed included storage tanks, pressure vessels (reactors and separator vessels), heat exchangers, wiped film evaporators, flare system, a stripper tower, recycle gas compressors, plant air compressor, pumps, cooling tower, heat transfer fluid heater systems, and a dry scrubber system.

Developed start-up, operation, standard shutdown, and emergency shutdown procedures for front-end and back-end processes using guidance from process technology vendors. Conducted training of plant operators in procedures.

Performed engineering, installation, commissioning and start-up for plant upgrades to increase efficiency, operability, and safety of the plant, including UPS system for key plant equipment, addition of thermal oxidizer to front-end process, vapor recovery system at loading rack, tank vent system modification, front-end vacuum system modification, recycle compressor knock-out system modification, and process pump upgrades. Work included material and energy balances, PFD and P&ID updates, PSM evaluations, consultation with third party engineers, equipment vendors, and mechanical and electrical contractors.

Purchased analytical equipment for plant laboratory and hired and supervised lab technicians.

Developed OSHA PSM program for faci l i ty. Par t icipated in PHA faci l i tated by thi rd par ty eng ineer ing f i rm using what - i f procedure; led MOC evaluat ions of al l plant upgrades pr ior to implementat ion; updated PFDs and P&IDs as needed. Page 3 – W. Warren Wright, P.E.

Set up the mechanical integrity program for the facility, populating Plant Condition Management Software (PCMS) with data on all process equipment and piping, and collecting first round of data

Cox-Colvin & Associates, Dublin, OH (Engineering/Environmental Consultant) 2003 – 2007 Project and Senior Engineer

Performed remedial design, construction, and O&M, and environmental management activities at industrial facilities throughout Ohio, including a solvent recycling facility (Veolia Environmental Services, West Carrollton, Ohio), synthetic rubber manufacturer (Carlisle Engineered Products), and lighting manufacturer. Work included development of material and energy balances, PFD, and P&IDs for high- vacuum dual phase extraction, soil vapor extraction, air sparging, in-situ bioremediation, in-situ chemical oxidation, carbon adsorption, air stripping, and catalytic oxidation. Performed pilot testing to develop design parameters for technologies based on site. Worked with third party controls engineer. Prepared O&M manuals for installed systems.

Designed, permitted and installed wastewater treatment process for launderer of solvent rags to bring facility into compliance with sewer regulations. Work included material and energy balances, development of PFDs and P&IDs in coordination with technology vendor, and installation of system. Datanet Engineering, Baltimore, MD (Corrosion/Engineering/Environmental Consultant) 1997 - 2003 Project Engineer

Developed EPA risk management programs for industrial facilities, including a chemical distributor, plastic bag printing facility, and wire welding material manufacturer.

Performed corrosion evaluations of steel and plastic ASTs and USTs, elevated water tanks, sewage pumping stations, and concrete infrastructure at facilities in accordance with API codes and EPA regulations. Participated in coatings and cathodic protection system design for system upgrades. Geomatrix, Inc. Hyattsville, MD (Engineering/Environmental Consultant) 1993 - 1997 Project Engineer

Performed remedial investigation, design, installation and system O&M for releases of petroleum and chlorinated hydrocarbons to soil and groundwater at facilities. Work included development of material and energy balances, PFDs, and P&IDs for soil vapor extraction, air sparging, in-situ bioremediation, carbon adsorption, and air stripping. Performed pilot testing to develop design parameters for technologies based on site. Worked with third party controls engineer. Prepared O&M manuals for installed systems.

SCS Engineers, Reston, VA (Engineering/Environmental Consultant) 1989 - 1993 Staff Engineer

Performed remedial feasibility studies and conceptual design for releases of petroleum and chlorinated hydrocarbons to soil and groundwater at operating RCRA facilities and abandoned sites. Feasibility studies involved the evaluation of technologies for effectiveness, constructability and cost. Preferred alternative was selected and conceptual design performed. Work included development of material and energy balances, PFDs, and P&IDs for solvent extraction, soil washing, low temperature thermal desorption, high-vacuum dual phase extraction, soil vapor extraction, air sparging, in-situ bioremediation, carbon adsorption, air stripping, and catalytic oxidation. Performed pilot testing to develop design parameters for preferred technologies based on site. Worked with third party engineering firms and contractors.

Contact this candidate