RICHARD R RAMOS

**** * *** *** **** #*** **** COLBY AVE #104 562-***-**** (C)

LONG BEACH, CA. 90808 EVERETT, WA. 98201 714-***-**** (C) acqtcx@r.postjobfree.com acqtcx@r.postjobfree.com acqtcx@r.postjobfree.com

TEST ENGR. / AVIONICS CHECKOUT MECH. / INSTRUMENTATION TECH. / TEST & EVALUATION TECH. / SYSTEMS TEST TECH. / ENGR. LAB TECH.

I have trained in a wide range of electronic tasks, EMI/EMC testing of electronic boxes and wire harnesses. Also with measurement devices (flow/pressure meters, gauges, valves), and measuring equipment (data acquisition, accelerometers, transducers, torque wrenches, thermocouples), and the used for flight hardware (FAA/PMA).

Vibration & Environmental testing as required per RTCA/DO-160, MIL-STD-810 standards.

EMC/EMI Qualification testing using DO-160E of electronic devices, and wire harnesses

Qualification Testing of engineering units, using on-site and off-site facilities.

Use of Environmental equipment and Vibration equipment, also data acquisition,

Blueprints, schematics, QTP/QTR test procedures, monitoring & documentation of tests and data.

Fabrication of cable assemblies, test harnesses, test panels/bays, and soldering as required.

Build and testing of circuit board assy, including soldering of microelectronic assy.

Knowledge of most metal & pipe fabrication methods(familiar with most hand and shop tools)

PROFESSIONAL EXPERIENCE

STS AVIATION – SEATTLE WASHINGTON OCTOBOR 2014 – NOVEMBER 2014

Avionics Tech/Parts Coordinator at Seatac intl airport – ATR/DFW à Air Canada customer

Perform all maintenance and or functional checks per FAA/AAM docs required by customer on aircraft.

Perform installation and checkout of gogo wifi system on Emb 190 series aircraft.

Keep inventory and control of parts/sub-assemblies and kitting requirements.

Build up wire harnesses for installation on aircraft.

VOLT TECHNICAL (ATS ) - EVERETT WASHINGTON MAY 2014 – AUGUST 2014

Avionics Aircraft Test/Maintenance Technician

Performs routine repairs, checks, and installations of all Avionics systems on aircraft. Works under minimal supervision. Within budgeted or estimated time, repair, modify, install, and perform routine maintenance of all Avionics systems with accuracy and with minimal assistance.

• Accurately interpret maintenance manuals, service bulletins, wiring diagrams, system schematics, drawings, engineering orders and other documents from both the customer and manufacturing company.

• Properly utilize Avionics test equipment to perform systems test and keep abreast of new and advanced test equipment and the use of such equipment. Properly utilized and maintain Avionics hand tools to perform repairs and installations.

• Accurately document work performed as set forth by AMM, WPM, and customer maintenance programs on a daily basis using the standard format. Prepare routine reports and correspondence.

• Knowledge of Mcdonnell Douglas series aircraft, DC-9, DC-10, MD-80, MD-90,

MD-11, and C-17. Also Boeing series aircraft, B737, B767, B747, and Airbus A320.

SUPERIOR GRP INC (L-3 COMM ELECTRON TECHNOLOGIES) NOV. 2013 – DEC. 2013

TORRANCE, CALIFORNIA

Fabrication Technician

Support engineering in building test racks, and power breakout boxes for TWT satellite testing.

Knowledge of high voltage DC wiring and assembly and fabrication.

Familiar with test rack and equipment assembly process.

Able to work in a engineering lab environment with little or no supervision.

SYSTEM PROS (ROGERSON KRATOS), QUALIIFICATION TESTING ON EFIS DISPLAYS FOR ROTORCRAFT (A109, 427, 429 MODELS).

PASADENA, CALIFORNIA SEPT. 2013 – NOV. 2013

Engineering Technician

Support engineering in EMC/EMI qualification testing of the A109 (EFIS) electronic flight instrumentation

system. Product testing per DO-160C with outside testing labs, and working in a engineering lab.

Knowledge and understanding of the qualification process using RTCA/DO-160.

Familiar with the production and assembly processes.

Able to fabricate and build in a engineering lab environment.

MIT INC. (THE BOEING COMPANY), C-17 GLOBEMASTER PRODUCTION

LONG BEACH, CALIFORNIA AUG. 2012 – FEB. 2013

Test & Evaluation/Iinstrumentation Technician 1/2

Modify and terminate cables to existing test benches. Support Fabrication of "on-the-fly" test benches to support testing of avionics software/hardware. Assemble/install electronic and mechanical hardware in new modified lab.

Solder, crimp, splice, lugging, and fabricate/terminate electrical harnesses from engineering drawings.

Install electronic/mechanical hardware in test cabinets and ITS simulator racks, route and install wiring

Support engineers in ASIF II lab flight simulator build, and FAST LRU test lab, also ITF lab.

Also install electro/mechanical assemblies in a environmental controlled area.

PDS TECHNICIAL SERVICES ( VACCO INDUSTRIES, A SUBSIDISARY OF ESCO TECHNOLOGIES COMPANY) SOUTH EL MONTE, CALIFORNIA JUN. 2012 – JUL. 2012

Electro/Mech Engr. Test Technician

Support and maintain engineering test equipment.

Support the Boeing STS heavy launch vehicle program.

Familiar with lab view test software

2ROADS PROFF. RES. INC. (MOOG AIRCRAFT GROUP), FEB. 2012 – APR. 2012 TORRANCE, CALIFORNIA Engineering Technician

Perform and assist in the EMC/EMI qualification testing of electro-mechanical actuating aircraft assemblies for the Airbus A350 program. Responsibilities include testing with automated test equipment, use of temperature chambers, liquid nitrogen, skydrol, and other hydraulic oils to functional test per QTP, ATP, PFT .

(TBGB) Tee Bevel Gear Box, (DDGB) Down Drive Gear Box, (STL) System Torque Limiter, (WTB) Wing Tip Brake, (GRA) Geared Rotary Actuator, (PCU) Power Control Unit.

Preformed a variety of mechanical tasks used in acceptance testing, use of several types of torque wrenches, digital pressure gauges, and other required mechanical tools as required.

Testing requirements : Backlash check, Run-in, Breakout torque, No load drag torque, Dynamic lockout, Seal tightness, Endurance and efficiency testing.

APR COUNSULTING (NORTHROP GRUMMAN CORP.), DEC. 2010 – JAN. 2011

EL SEGUNDO, CALIFORNIA

Instrumentation Technician 3

Perform a variety of duties in the electrical, electronic, or optical areas for assigned programs in the Instrumentation Lab. The responsibilities include working from schematics, engineering drawings, and written or verbal instructions.

Efficient and neat when fabricating cable assemblies, test panels, test bays, etc.

May operate related equipment; conduct tests and report data in prescribed format; using predetermined methods, sequences, and setups.

VOLT TECHNICAL (THALES AVIONICS), IRVINE, CA. AUG.- SEPT. 2010

Systems/Instrumeentation Technician

Supports engineering activities such as design, test, checkout, modification, fabrication and assembly of

flight entertainment systems to customer specifications.

May include analog, digital and/or video circuits, and logic systems.

Works from schematics, diagrams, written and verbal descriptions, or layouts.

Perform testing, checkout and trouble-shooting functions and operational test and fault isolation on systems and equipment.

Assists in determining methods or actions to remedy malfunctions.

Assists in the design, construction, test and checkout of test equipment. Uses manufacturing, test, development or diagnostic equipment, including, but not limited to, test programs oscilloscopes, signal generators and specialized test apparatus.

APEX SYSTEMS INC. (TECHNICIAL STAFFING), BOHEMIA, NY MAR. – JUL. 2010

GOODRICH LIGHTING PROJECT, DAYTON T BROWN TEST LABS (DTB), BOHEMIA, NY

Test Engineer

Working with Goodrich engineering and DTB test lab personal in EMC/EMI Qualification testing, of new led lights for the flight deck (FDAI) and exterior lighting on the BOEING 787 aircraft. Includeding all EMC/EMI vibration & environmental testing per customer requirements.

Development of test plans / procedures / reports.

Management of all testing to meet the applicable commercial specifications.

Execution and Witness of environmental and/or electrical qualification testing.

Collaborate with cross functional teams in the development of test control apparatus & equipment.

Perform any of the following types of testing: EMI/EMC, Power Quality, Environmental

(i.e. temperature, shock, altitude, humidity, lighting, fog, ice, etc.)

Experience in commercial product development environmental testing (RTCA/DO-160).

ROCKWELL COLLINS INC. Tustin, CA. JUL. 2006 – FEB. 2009

Cabin Systems (Flight Entertainment Division),

Engineering Lab Technician

Responsible for running all EMC/EMI Qualification vibration & environmental testing. Worked with engineering and supported testing of test units, also development and qualification testing of hardware for in-flight entertainment systems for customers.

IFE units included Sony trans-com, Hughes-avicom, LCD displays, DDIB, AVU, DMS, BDS…

Qualification testing of all Rockwell Collins entertainment systems, and products.

Vibration testing and temperature testing to DO-160 requirements.

Responsible for documentation of test data, including compiling data and reporting information

Familiar with various controllers and recorders, vibration tables, temperature chambers used for

VOLT TECHNICAL RESOURCES (Rockwell Collins) AUG. 2005 – JUL. 2006

(PASSENGER ENTERTAINMENT SYSTEMS), Pomona, CA

Engineering Lab Technician

Worked with Engineers in a lab environment building test equipment, modifying circuit boards, wire harnesses, and test racks. Also assists engineers with EMC/EMI Qualification Testing of units such as Video Devices, Switch Boxes, LCD Display Monitors (Seat and Bulkhead), Aircraft System Boxes used for Flight Entertainment on Aircraft, also assist with off-site facility testing when required.

AEROTEK INC. Long Beach, CA (Temp. Position) AUG. – SEPT. 2004

BUTLER INTL. Palm Springs, CA (Temp. Position) OCT. – JAN. 2005

Avionics Technician

Worked as a Technician for Gulf Stream at the long beach facility. Preformed duties on service aircraft such as modifications, routine service requirements, pre-flight and post-flight checks on aircraft systems.

Worked for Sky west airlines on their EMB-120 series aircraft doing a modifying and installing wire

harnesses that integrated the EGPWS, TCAS, and Weather Radar systems into a single cockpit display manufactured by Avi-dyne corp.

Installation and modification of wire harnesses

Crimping, lugging, and splicing

THE BOEING COMPANY (FORMELY FRONTIER SYSTEMS) JAN. 2001 – MAR. 2003

Irvine, California

Engineering/Instrumentation Technician

Worked with engineers developing hardware for avionic systems to be used on unmanned aircraft, this was a UAV / DARPA R&D military contract for the U.S. Army.

Avionics box using sequence planning, Layout, Assembly, fabrication, and installation of hardware.

Modified and tested electronic components and circuit boards to meet required engineering specifications.

Required wire harness building, crimping, splicing, lugging, soldering, drilling and tapping.

Environmental testing, bread-boarding, circuit board building, and conformal coating when required.

(US ARMY): A-160 HUMMINGBIRD WARRIOR UAV PROGRAM.

(SOCOM): R-22 UAV PROGRAM.

THE BOEING COMPANY, LONG BEACH, CA. JUN. 1988 – DEC. 2000

(Formerly McDonnell Douglas Corp.)

Avionics Technician

Knowledge of flight guidance, AFCS, EFIS, FMS, CFDS, EIS, CAWS, DFDR, VHF/HF, ATC, ADF, ILS, VOR, TCAS, IRS, air data, hydraulic, and pneumatic systems. I performed functional tests on Cockpit/cabin communication and entertainment systems. Required to work from schematics and engineering orders, also performed electrical tasks such as installing, wire stripping, lugging, crimping, splicing, soldering, and torque on wire harnesses and coax. Also knowledge of some mechanical installations using various gauges, meters and measuring devices (pressure, flow, valves).

Final assembly, Pressure pit, Flight ramp operations on DC-9, MD-11, MD-80/90, B-717, C-17.

Worked on MD-90 modification program at Tijuana, Mexico.

MD-11 gross weight increase modification program, Zurich Switzerland.

C-17 ADS modification program, Long Beach, CA

THE BOEING COMPANY, LONG BEACH, CA. (CONTD.)

Instrumentation Equipment Technician

Required knowledge of electronic components, planning, layout, development, fabrication, calibration, and maintenance of electrical or electronic equipment used to test aircraft systems. I worked with engineers, from engineering orders, tool design drawings, schematics, and specification sheets.

Required building of test equipment using electrical and mechanical devices such as meters, regulating

Valves, flow meters, and other devices.

Required knowledge of and use of bench test equipment, and processes.

Required development and fabrication of boxes using sheet metal or aluminum, using machine shop equipment.

Required cutting, drilling, tapping, countersinking, bending when required.

Electrical Aircraft Mechanic

Required installation, hookup of wire harnesses, components, and flight hardware on aircraft.

I worked off of assembly drawings, engineering orders, and advanced assembly orders.

Modify when required to meet FAA specifications and Quality Assurance requirements.

EDUCATION

A.S., Engineering, East Los Angeles College, Los Angeles, CA (pending)

LICENSES & CERTIFICATIONS & TRAINING COURSES

FCC License

PROFFESSIONAL REFERENCES

RICHARD E SCHAFFER – Senior Systems Engineer 727-***-****

GARY GARSIDE – Certification Engineer, Rockwell Collins Inc. 714-***-****

DAN CLARK – Project Manager, Rockwell Collins Inc. 321-***-****

ANDREW CASTELLANOS – Project Manager, Thales Avionics Intl 949-***-****

WARREN McELROY – Manager, The Boeing Company 562-***-****

ROBERT (BOB) BURKE – Section Lead, The Boeing Company 564-***-****

RANDY GIBSON – L-3 Communication Electron Technologies 310-***-****

RON GIGANTI – STS Recruiter 800-***-**** X8502

JACK PIXEN – Manager 678-***-****

Contact this candidate